Search

As the by-product accompanied by sewage treatment, sludge has complex composition and high moisture content, therefore, its reutilization and disposal are still a challenge. In this paper, five kinds of quartz sand conditioners with different particle sizes (denoted as QS1, QS2, QS3, QS4 and QS5, respectively) were used to explore the effect of particle size distribution of conditioners on sludge dewatering performance. The moisture content, capillary suction time (CST), time to filter (TTF), specific resistance of filtration (SRF), particle size distribution curve, pore distribution law, scanning electron microscopy, isothermal adsorption-desorption curve and extracellular polymeric substances distribution were employed to characterize the modified sludge and explore the improvement mechanism. The results show that the particle size distribution of the conditioner significantly affects the efficiency of sludge dewatering. The wt% of sludge regulated with QS1 (QS1-S) could be reduced to 52%, and its CST value, TTF value and SRF value is 57.93 s, 278 s and 1.84 × 10

A mathematical model for the flowrate and rotation speed of RCP during idling was established. The numerical calculation method and dimensionless method were used to analyze the flow, head, torque and pressure and speed changes under idle conditions. Regularity, using the Q criterion vortex identification judgment method combined with surface flow spectrum morphology analysis to diagnose the vortex dynamic characteristics on RCP blade. On impeller blade, there is two oscillations in the pressure ratio on pressure surface in blade outlet region. The velocity on the suction surface is two times more oscillating than the inlet of blade, and there is an intersection with the velocity ratio curve on pressure surface. On blade of guide vane, the pressure ratio increases along the inlet to outlet direction, and the speed ratio decreases with the increase of idle time. There is a vortex that rotates counterclockwise on the suction surface, and the streamline on the suction surface of blade is subjected to the entrainment and blocking action of the vortex creates a large reverse flow in the main flow region. There are two vortices at the outlet of guide vane suction side and the vortices are in opposite directions.