Search

Nonionic alkyl ethoxylate surfactants are widely used in agrochemicals to facilitate the permeation of systemic herbicides and fungicides across the plant waxy film. Industrial grade surfactants are often highly mixed and how the mixing affects their interactions with pesticides and wax films remains largely unexplored. A better understanding could enable design of mixed nonionic surfactants for herbicides and fungicides to maximize their efficiency and reduce wastage whilst controlling their impact on plant wax films.In this study, nonionic surfactants with general structure n-oxyethylene glycol monododecyl ether (CPesticide solubilization made surfactant micelles effectively more hydrophobic but subsequent wax dissolution caused pesticide release and the restoration of the micellar amphiphilicity. Nonionic surfactants with lower HLBs form larger nanoaggregates, show enhanced wettability, and have better ability to solubilize and permeate pesticides across the wax film, but may cause significant damage to plant growth. These observations help explain why herbicides applied on weeds would benefit from surfactants with lower HLB values while fungicides require surfactants with HLBs to balance between delivery efficiency and potential phytotoxicity risks. more...

[Hypothesis]: The milder interaction with biosystems makes the zwitterionic surfactants an important class of surfactants, and they are widely used in biological applications and in personal care formulations. An important aspect of those applications is their strong synergistic interaction with anionic surfactants. It is anticipated that the strong interaction will significantly affect the adsorption and self-assembly properties., [Experiments]: Surface tension, ST, neutron reflectivity, NR, and small angle neutron scattering, SANS, have been used here to explore the synergistic mixing in micelles and at the air–water interface for the zwitterionic surfactant, dodecyldimethylammonium propanesulfonate, C12SB, and the anionic surfactants, alkyl ester sulfonate, AES, in the absence and presence of electrolyte, 0.1 M NaCl., [Findings]: At the air–water interface the asymmetry of composition in the strong synergistic interaction and the changes with added electrolyte and anionic surfactant structure reflect the relative contributions of the electrostatic and steric interactions to the excess free energy of mixing. In the mixed micelles the synergy is less pronounced and indicates less severe packing constraints. The micelle structure is predominantly globular to elongated, and shows a pronounced micellar growth with composition which depends strongly upon the nature of the anionic surfactant and the addition of electrolyte. more...

[Hypothesis] l-carnitines in our body systems can be readily converted into acyl-l-carnitines which have a prominent place in cellular energy generation by supporting the transport of long-chain fatty acids into mitochondria. As biocompatible surfactants, acyl-l-carnitines have potential to be useful in technical, personal care and healthcare applications. However, the lack of understanding of the effects of their molecular structures on their physical properties has constrained their potential use., [Experiments] This work reports the study of the influence of the acyl chain lengths of acyl-l-carnitines (CnLC) on solubility, surface adsorption and aggregation. Critical micellar concentrations (CMCs) of CnLC were determined by surface tension measurements. Neutron reflection (NR) was used to further examine the structure and composition of the adsorbed CnLC layer. The structural changes of the micellar aggregates under different concentrations of CnLC, pH and ionic strength were determined by dynamic light scattering (DLS) and small angle neutron scattering (SANS)., [Findings] C12LC is fully soluble over a wide temperature and concentration range. There is however a strong decline of solubility with increasing acyl chain length. The adsorption and aggregation behavior of C14LC was therefore studied at 30 °C and C16LC at 45 °C. The solubility boundaries displayed distinct hysteresis with respect to heating and cooling. The CMCs of C12LC, C14LC and C16LC at pH 7 were 1.1 ± 0.1, 0.10 ± 0.02 and 0.010 ± 0.005 mM, respectively, with the limiting values of the area per molecule at the CMC being 45.4 ± 2, 47.5 ± 2 and 48.8 ± 2 Å2 and the thicknesses of the adsorbed CnLC layers at the air/water interface increasing from 21.5 ± 2 to 22.6 ± 2 to 24.2 ± 2 Å, respectively. All three surfactants formed core–shell spherical micelles with comparable dimensional parameters apart from an increase in core radius with acyl chain length. This study outlines the effects of acyl chain length on the physicochemical properties of CnLCs under different environmental conditions, serving as a useful basis for developing their potential applications., We thank Lonza for funding this project under the grant number P121881. The provision of neutron beam time from ISIS Neutron Facility (LOQ, RB1920293 and Surf, RB1920156) and ILL Neutron Facility (D11, 9-10-1613 and FIGARO, 9-13-840) is acknowledged. We also appreciate the SasView, developed by NSF award DMR-0520547, and Igor pro. more...

Although surfactants have been widely used in skin care and other related applications, our knowledge about how surfactants interact with stratum corneum (SC) lipids remains limited. This work reports how surfactants interact with a lipid SC model by neutron diffraction and molecular dynamics (MD) simulations, focusing on examining the impact of surfactant molecular architecture. The surfactant-SC mixed membrane was constructed by an equimolar mixture of ceramide/cholesterol/fatty acids and surfactant at 1% molar ratio of total lipids. The arrangements of water and surfactant molecules in the membrane were obtained through neutron scattering length density (NSLD) profiles via contrast variation method, meanwhile, MD simulation clearly demonstrated the mechanism of hydration change in the surfactant-model SC mixed membrane. No drastic difference was detected in the repeating distance of the short periodicity phase (SPP) upon adding surfactants, however, it significantly enhanced the membrane hydration and reduced the amount of phase separated crystalline cholesterol, showing a strong dependence on surfactant chain length, branching and double bond. This work clearly demonstrates how surfactant architecture affects its interaction with the SC membrane, providing useful guidance for either choosing an existing surfactant or designing a new one for surfactant-based transdermal application. more...

The formation of surface multilayer structures, induced by the addition of multivalent counterions in dilute surfactant solutions, has been widely observed in a range of anionic surfactants. The phenomenon is associated with the ability to manipulate surface properties, especially in the promotion of enhanced surface wetting, and in the presence of an extensive near surface reservoir for rapid surface delivery of surfactant and other active components. Hypothesis. In the single alkyl chain anionic surfactants, such as sodium dodecysulfate, SDS, sodium alkylethoxylsulfate, SAES, and alkylestersulfonate, AES, surface multilayer formation is promoted by trivalent counterions such as Al3+, and is generally not observed with divalent counterions, such as Ca2+ or with monovalent counterions. In the di-alkyl chain anionic surfactant, dodecylbenzenesulfonate, LAS, surface multilayer formation now occurs in the presence of divalent counterions. It is attributed to the closer proximity of a bulk lamellar phase, resulting in a greater tendency for surface multilayer formation, and hence should occur in other di-alkyl chain anionic surfactants. Experiments. Aerosol-OT, AOT, is one of the most commonly used di-alkyl chain anionic surfactants, and is extensively used as an emulsifying, wetting and dispersing agent. This paper reports on predominantly neutron reflectivity, NR, measurements which explore the nature of surface multilayer formation of the sodium salt of AOT at the air-solution interface with the separate addition of Ca2+ and Al3+ counterions. Findings. In the AOT concentration range 0.5 to 2.0 mM surface multilayer formation occurs at the air-solution interface with the addition of Ca2+ or Al3+ counterions. Although the evolution in the surface structure with surfactant and counterion concentration is broadly similar to those reported for SDS, SAES and AES, some notable differences occur. In particular the surfactant and counterion concentration thresholds for surface multilayer formation are higher for Ca2+ than for Al3+. The differences encountered reflect the greater affinity of the di-alkyl chain structure for lamellar formation, and how the surface packing is controlled in part by the headgroup structure and the associated counterion binding affinity. more...

There is an increased interest in the use of natural surfactant as replacements for synthetic surfactants due to their biosustainable and biocompatible properties. A category of natural surfactants which are attracting much current interest is the triterpenoid saponins; surface active components found extensively in a wide range of plant species. A wide range of different saponin structures exist, depending upon the plant species they are extracted from; but regardless of the variation in structural details they are all highly surface active glycosides. Greater exploitation and application requires a characterisation and understanding of their basic adsorption and self-assembly properties.HypothesisGlycyrrhizic acid, extracted from Licorice root, is a monodesmosidic triterpenoid saponin. It is widely used in cosmetic and pharmaceutical applications due to its anti-inflammatory properties, and is an ingredient in foods as a sweetener additive. It has an additional attraction due to its gel forming properties at relatively low concentrations. Although it has attracted much recent attention, many of its basic surface active characteristics, adsorption and self-assembly, remain relatively unexplored. How the structure of the Glycyrrhizic acid saponin affects its surface active properties and the impact of gelation on these properties are important considerations, and to investigate these are the focus of the study.ExperimentsIn this paper the adsorption properties at the air-water interface and the self-assembly in solution have been investigated using by neutron reflectivity and small angle neutron scattering; in non-gelling and gelling conditions.FindingsThe adsorption isotherm is determined in water and in the presence of gelling additives, and compared with the adsorption behaviour of other saponins. Gelation has minimal impact on the adsorption; apart from producing a rougher surface with a surface texture on a macroscopic length scale. Globular micelles are formed in aqueous solution with modest anisotropy, and are compared with the structure of other saponin micelles. The addition of gelling agents results in only minimal micelle growth, and the solutions remain isotropic under applied shear flow. more...

Hypothesis l -carnitine plays a crucial role in the cellular production of energy by transporting fatty acids into mitochondria. Acylated l -carnitines are amphiphilic and if appropriate physical properties were demonstrated, they could replace many currently used surfactants with improved biocompatibility and health benefits. Experiments This work evaluated the surface adsorption of lauroyl- l -carnitine (C12LC) and its aggregation behavior. The size and shape of the aggregates of C12LC surfactant were studied at different temperatures, concentrations, pH and ionic strength by dynamic light scattering (DLS) and small-angle neutron scattering (SANS). Surface tension measurements were carried out to determine the critical micellar concentration (CMC) of C12LC. Combining with the Gibbs equation, the surface excess at different concentrations could be determined. Neutron reflection (NR) was used to determine the structure of the adsorbed layer at the air/water interface with the help of isotopic contrast variations. Findings At pH 7, the limiting area per molecule (ACMC) of the zwitterionic C12LC adsorbed layer at the air/water interface was found to be 46 A2 from surface tension and neutron reflection, smaller than the values of C12PC, C12E5, DTAB, C12C4betaine and C12C8betaine but close to that of SDS. A pronounced surface tension minimum at pH 2 at the low ionic strength was linked to a minimum value of area per molecule of about 30 A2, indicating the competitive adsorption from traces of lauric acid produced by hydrolysis of C12LC. As the concentration increased, area per molecule reached a plateau of 37–39 A2, indicating the dissolution of the more surface-active lauric acid into the micelles of C12LC. DLS and SANS showed that the size and shape of micelles had little response to temperature, concentration, ionic strength or pH. The SANS profiles measured under 3 isotopic contrasts could be well fitted by the core–shell model, giving a spherical core radius of 15.7 A and a shell thickness of 10.5 A. The decrease of pH led to more protonated carboxyl groups and more positively charged micelles, but the micellar structures remained unchanged, in spite of their stronger interaction. These features make C12LC potentially attractive as a solubilizing agent. more...

Hypothesis: Surfactants are widely used in agri-sprays to improve pesticide efficiency, but the mechanism underlying their interactions with the surface wax film on plants remains poorly understood. To facilitate physical characterisations, we have reconstituted wheat cuticular wax films onto an optically flat silicon substrate with and without octadecyltrimethoxysilane modification to control surface hydrophobicity. Experiments: Imaging techniques including scanning electron microscopy (SEM) unravelled morphological features of the reconstituted wax films similar to those on leaves, showing little impact from the different substrates used. Neutron reflection (NR) established that reconstituted wax films were comprised of an underlying wax film decorated with top surface wax protrusions, a common feature irrespective of substrate hydrophobicity and highly consistent with what was observed from natural wax films. NR measurements, with the help of isotopic H/D substitutions to modify the scattering contributions of the wax and solvent, revealed different wax regimes within the wax films, illustrating the impact of surface hydrophilicity on the nanostructures within the wax films. Findings: It was observed from both spectroscopic ellipsometry and NR measurements that wax films formed on the hydrophobic substrate were more robust and durable against attack by nonionic surfactant C 12E 6 solubilised with pesticide Cyprodinil (CP) than films coated on the bare hydrophilic silica. Thus, the former could be a more feasible model for studying the wax-surfactant-pesticide interactions. more...

The formation of surface multilayer structures, with the addition of multivalent electrolytes, has been observed in a range of different anionic surfactants; and notably the sodium oxyethylene glycol alkyl sulfate, SAES, and alkyl ester sulfonate, AES, surfactants. The addition of increasing amounts of AlCl3 results in increasing surface layering, with a transition from monolayer to bilayer to ultimately more extended multilayer structures at the interface. The headgroup structures of these SAES and AES surfactants and their hydrophilic / hydrophobic balance give a degree of tolerance to the precipitation induced by multivalent counterions. This was considered to be important factor associated with the multivalent counterion induced surface layering. In this paper the impact of sodium dodecyl sulfate, SDS, an anionic surfactant more susceptible to precipitation in the presence of multivalent counterions, on the surface multilayer formation and solution self-assembly of sodium diethylene glycol monododecyl sulfate, SLES, is explored using surface tension, neutron reflectivity and small angle neutron scattering. The results show that SDS exhibits a similar progressive evolution in surface structures with increasing AlCl3 concentrations, as observed in SLES and related SAES surfactants, and in MES, sodium methyl ester dodecyl sulfonate surfactant. However in the SLES / SDS mixtures the structural evolution is different, and more complex pattern with increasing AlCl3 concentration is observed. The initial transition from monolayer to bilayer / trilayer structures exists, but the surface at higher AlCl3 concentration reverts to monolayer adsorption before extended multilayer structures are formed. Complementary small angle neutron scattering measurements indicate a more complex evolution in the micelle structure which broadly correlates with the surface behaviour. The results illustrate how subtle changes in headgroup structure and packing affect relative counterion binding and hence the surface and solution structures. The results reinforce and extend the observations of related structures on different SAES and AES surfactants, and highlight the opportunity for manipulating surface adsorption behaviour with surfactant mixtures. more...

Hypothesis Current viscoelastic surfactant (VES) aqueous solutions quickly freeze and thus, lose their viscoelasticity and flowability at subzero temperatures, limiting their practical use in cold environments. Therefore, it is highly desirable to develop cryo-VES fluids with freezing point far below 0 °C. Since addition of alcohol antifreeze greatly reduces the freezing point of water, cryo-VES fluids might be generated in the presence of alcohols. Experiments The self-assembly behavior of a C22-tailed surfactant, erucyl dimethyl amidopropyl betaine (EDAB), in eight alcohol/water cosolvents from 20 to −20 °C was studied by pyrene fluorescent probe, cryo-TEM imaging and cryo-SNAS characterization, and the solution properties of the mixtures were investigated by rheological test. Findings It is found that the alcohol molecular structure, content and temperature play crucial roles dominating EDAB self-assembly behavior. Monohydric alcohols are unfavorable for micelles formation and growth, thus VES fluids cannot be obtained in the presence of 50 vol% monohydric alcohols even at subfreezing temperatures. On the contrary, dihydric and trihydric alcohols with short alkyl chain show less negative effect on EDAB micellization. Thus, cryo-VES fluids can be formed in the presence of 50 vol% ethylene glycol, 1,3-propanediol or glycerol due to the formation of wormlike micelles. These cryo-VES fluids with different alcohols exhibit different temperature-sensitivity and rheological properties, furnishing them with potential applications in anti-freeze hydraulic fracking fluids and aircraft deicing/anti-icing fluids. more...

Nonionic surfactants have been widely used in agri-sprays to enhance the solubility and mobility of pesticides, but what happens when pesticides become solubilized into surfactant micelles remains poorly characterized. To facilitate physical characterisations, we used the nonionic surfactant hexaethylene glycol monododecyl ether (C12E6) as a model system to solubilize 4 pesticides including Cyprodinil (CP), Diuron (DN), Azoxystrobin (AZ) and Difenoconazole (DF). The investigation focused on the influence of solubilizate and temperature in driving changes to the micellar nanostructures. Dynamic light scattering (DLS), cryogenic transmission electron microscopy (Cryo-TEM) and small-angle neutron scattering (SANS) measurements were used to reveal changes to the micellar structure before and after pesticide solubilisation. Nuclear magnetic resonance (NMR) was also applied to investigate the solubility and location of each pesticide in the micelles. Pesticides clearly altered the micellar structure, by increasing the aggregation number and micellar lengths, whilst shrinking and dehydrating the shells, leading to a consequent decrease in the dispersion cloud points. Increases in temperature affected micellar structures in a similar way. Thus, temperature increases and the solubilisation of pesticides can both make the surfactant effectively more hydrophobic, altering the micellar nanostructures and shifting the pesticide location within the micelles. These changes subsequently implicate how pesticides are delivered into plants through the natural wax films. more...

Saponins are surface active glycosides which can be extracted from a range of different plant species. This class of biosurfactants is of much current interest because of their biocompatibility and biosustainability, and a range of other interesting properties. The Quillaja saponin, the focus of this paper, is extensively used in foods, beverages and cosmetics due to their accessibility and agency approval. Aspects of their wider application rests with their use in combination with different synthetic surfactants, to optimise and tailor performance and functionality. Characterising and understanding the self-assembly of such mixtures is an essential requirement for that wider exploitation. The surface activity of a range of different saponins has been extensively reported, but the self-assembly properties of the Quillaja saponin, and its mixture with different synthetic surfactants has not been reported in any detail. Of particular interest is how the bidesmodic structure of the Quillaja saponin and the mixing with the different cosurfactants affects the evolution in the micelle structure, and this is the focus of this study. Small angle neutron scattering, SANS, has been used to characterise the micelle formation of the Quillaja saponin and of its mixtures with the anionic surfactant sodium dodecyl sulfate, SDS, and the nonionic surfactants, dodecaethylene glycol monododecyl ether, C12E12, and pentaethylene glycol monododecyl ether, C12E5. The Quillaja saponins form relatively small globular micelles with a relatively small aggregation number. In mixtures with SDS and the nonionic surfactants the micelles retain their globular structure. In the mixtures the micelle aggregation number evolves towards the value for the pure synthetic surfactant component, as the packing constraints change with the decreasing mole fraction of saponin in the micelle. The evolution in the micelle structure and size reflects the change in the structure and geometry of the associated surfactant components, and is largely dominated by the Quillaja structure. The results provide an interesting insight into the factors controlling the self-assembly in saponin – surfactant mixtures, and how the saponin structure affects the self-assembly. more...

Saponins are plant based biosurfactants that are obtained from a wide variety of plant species. They are surface active glycosides with a hydrophobic group, which is commonly a triterpenoid or steroidal group, and saccharide hydrophilic units. Their structures are markedly different from conventional synthetic surfactants, and present interesting challenges in understanding their optimal packing in self-assembled structures such as micelles. Furthermore the wide variety of molecular structures available provide interesting opportunities to optimise the packing in mixed systems. In the current literature there is limited information available on saponin self-assembly, and especially in saponin mixtures. The general view is that globular to more elongated micelle structures form at relatively low concentrations. Here small angle neutron scattering, SANS, is used to investigate and quantify the structure of escin, tea and glycyrrhizic acid micelles and particularly of escin/tea, tea/glycyrrhizic acid and escin/glycyrrhizic acid mixtures at relatively low concentrations. The focus is principally on how the different saccharide headgroup structures affect the self-assembly. Tea saponins form relatively small globular micelles, whereas escin and glycyrrhizic acid form larger more elongated globular micelle structures. The micelle structure and changes observed reflect the packing constraints associated with the aglycone triterpenoid hydrophobic section and the differences in the saccharide headgroups. In the escin/tea and glycyrrhizic acid/tea mixtures the greater intrinsic curvature associated with the tea saponin dominates the micelle structure over much of the composition range explored. For the escin/glycyrrhizic acid mixture the micelle size and aggregation number go through a minimum at an approximately equimolar composition, and this implies an intrinsic difficulty in efficient packing of the two different saponin structures, which results in an increase in the preferred curvature more...

Saponins are a class of bio-surfactants obtained from a wide variety of plant species. They are surface active glycosides which are used in the stabilisation of foams and emulsions in many food, drink and cosmetic applications. Their wider utilisation and application will involve their mixture with different synthetic and bio-derived surfactants, proteins and polymers. Understanding the mixing properties of saponins with other surfactants at surfaces and in self-assembly is key to their wider exploitation; and the focus here is on triterpenoid saponin escin and the anionic surfactant sodium dodecylsulfate, SDS. Previous analysis of the surface adsorption and critical micelle concentration, cmc, data using the pseudo phase approximation, PPA, indicate that the micelle mixing is more non-ideal than the surface mixing. The non-ideality is associated with the packing constraints arising from the quite different molecular structures and how this impacts upon the mixture self-assembly is probed here. To address specifically the self-assembly properties of saponin-surfactant mixtures, small angle neutron scattering, SANS, has been used to explore the nature of mixed micelles of escin and SDS. The SANS data for the escin / SDS mixtures are modelled as globular ellipsoidal micelles. The micelles exhibit an overall increase in size and aggregation number as the solution becomes richer in escin, and the evolution in micelle size goes through a minimum at relatively rich SDS solutions. The results illustrate the impact of the disparity in the molecular structures of escin and SDS on the self-assembly, and provides an insight into the factors affecting the departure from ideal mixing. more...

The aggregate states of partially fluorinated gemini surfactant [(CF3)2CF(CF2)2(CH2)10N(CH3)2]2(CH2)6Br2 (CF5C10–C6–C10CF5) on silica surface were investigated with atomic force microscopy (AFM) and water contact angle (CA) measurement by analyzing the effects of bulk concentration and adsorption time on stack state. On surfactant-adsorbed silica surfaces, there was a flat surface layer interspersed with some scattering surfactant aggregates. In the case of short adsorption times, the aggregates would be hemisphere. In the case of long adsorption times, the aggregates would be present in the form of bilayers. With the increase of bulk concentration, the adsorbed amount was enlarged and the surface layer became more compact. The formation of patchy bilayer aggregates indicated the saturation of the surface layer. Furthermore, organic solvent effects on the aggregate state of the surfactant on a silica surface were studied with four organic solvents, including n-hexane, dehydrated ethanol, 1,1,2-trichloro-1,2,2-trifluoroethane, and toluene. With the treatment of different organic solvents, the hemisphere aggregates on the surface layer can rearrange into spherical bilayer, rodlike monolayer, and branched rodlike monolayer aggregates, respectively. The polarity of solvents and affinity of organic solvents for surfactant molecules may have a great impact on the stack state of the fluorinated gemini surfactant molecules. more...

A series of partially fluorinated cationic gemini surfactants and their corresponding monomeric surfactants have been studied by isothermal titration microcalorimetry. The critical micelle concentration (CMC) and enthalpy of micellization ( Δ H mic ) were obtained from calorimetric curves. The CMCs of the gemini surfactants are much lower than those of the corresponding monomeric surfactants and decrease with an increase in the number of fluorine atoms on the hydrophobic chain. The micellization of partially fluorinated cationic gemini surfactants is much more exothermic than that of the corresponding monomeric surfactants. Because of the incompatibility of hydrocarbon spacer and partially fluorinated chain, Δ H mic values of the surfactants with a C6 spacer are more negative than those of the surfactants with a C12 spacer. The variations in the architecture of the fluorocarbon chain segments may be the reason of the irregularities in the change of Δ H mic for the gemini surfactants. Moreover, the contribution of the enthalpy generally increases with an increase in the number of fluorine atoms. more...

Both thermodynamic and microenvironmental properties of the micelles for a series of cationic surfactants hexadecyltrimethylammonium (C16TAX) with different counterions, F-, Cl-, Br-, NO3-, and (1/2)SO4(2-), have been studied. Critical micelle concentration (CMC), degree of micelle ionization (alpha), and enthalpy of micellization (DeltaH(mic)) have been obtained by conductivity measurements and isothermal titration microcalorimetry. Both the CMC and the alpha increase in the order SO4(2-)NO3-Br-Cl-F-, consistent with a decrease in binding of counterion, except for the divalent anion sulfate. DeltaH(mic) becomes less negative through the sequence NO3-Br-Cl-F-SO4(2-), and even becomes positive for the divalent sulfate. The special behavior of sulfate is associated with both its divalency and its degree of dehydration. Gibbs free energies of micellization (DeltaG(mic)) and entropies of micellization (DeltaS(mic)) have been calculated from the values of DeltaH(mic), CMC, and alpha and can be rationalized in terms of the Hofmeister series. The variations in DeltaH(mic) and DeltaS(mic) have been compared with those for the corresponding series of gemini surfactants. Electron spin resonance has been used to assess the micropolarity and the microviscosity of the micelles. The results show that the microenvironment of the spin probe in the C16TAX surfactant micelles depends strongly on the binding of the counterion. more...

This paper described that there were two or more endpoints in the curve when potentiometeric titration was used to determine the contents of mercaptan sulfur in residue fluidized catalytic cracking (RFCC) gasoline. Comparing with the one endpoint of a mixture solution of C 2 –SH to C 10 –SH determined under the same conditions, we found some components in RFCC gasoline affected the result of titration. A facile method washing the gasoline with 2 wt.% HCl solution was brought out to eliminate the interfering components from the RFCC gasoline. After being treated with this method, all RFCC gasoline that contained 14–27 μg/ml mercaptan sulfur (S RSH ) met the quality specification (S RSH shall not exceed 10 μg/ml) [GB 17930-1999, Chinese national standard for unleaded petrol (gasoline) for motor vehicles]. The analysis of gas chromatography-mass spectrometry (GC-MS) and gas chromatography-infrared spectrometer (GC-IR) verified that the interfering components were aniline, phenol and their alkyl-substituted derivatives. more...

The solubilities of ethane in aqueous solutions of sodium dodecyl sulfate (SDS) were measured at 313.15 K and at pressures up to 3 MPa. The molalities of SDS ( m SDS ) in the aqueous solution were 0.0000, 0.0020, 0.0040, 0.0060, 0.0070, 0.0080, 0.0090, 0.0100, 0.0126, 0.0150, 0.0200, and 0.0300. The effect of SDS on the gas solubility in both concentration regions below and above the critical micelle concentration (cmc) was studied. The existence of the micelles of SDS in the solution is favorable to the dissolution of ethane due to the hydrocarbon-like interior of the micelles. The solubilities of ethane in each micelle at different pressures were evaluated based on some assumptions. It was found that the intramicellar solubility of ethane is less than that of the gas in n -dodecane. It was also found that the solubility of ethane in the micelles increases linearly with the partial pressure of ethane. The cmc of SDS was evaluated based on the solubility vs m SDS curves and the effect of dissolved ethane on the cmc was studied. It was observed that the cmc shifts toward a higher value with the increase in dissolved ethane. more...

The infinite dilution activity coefficients of C 8 aromatics were measured in the nematic phase and isotropic phase of p -( o -methylphenylene)-bis- n -alkoxybenzoate (MPBRB) over a wide temperature range. Two reduced variables σ and τ were introduced to treat the data. It is found that the relationship between σ and τ is consistent with the principle of corresponding states. more...