Search

A novel series of N-Mannich bases of benzimidazole derivatives were synthesized and characterized by (1)H NMR, IR spectral studies and elemental analysis. The compounds were screened for analgesic and anti-inflammatory activity. 1-((Diethylamino)-methyl)-2-styryl benzimidazole 4 at 40mg/kg was found to be equipotent to paracetamol. 1-((Piperidin-1-yl) methyl)-2-styryl-benzimidazole 6 at 40mg/kg was found to be more potent than Diclofenac. Corneal permeability and quantum chemical calculations were performed to correlate the hydrogen bonding ability with permeability and activity. The energies of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) were correlated with pharmacological activity. The semi-empirical PM3 calculations (quantum chemical calculations) revealed that E(LUMO) and energy gap DeltaE were capable of accounting for the high in vitro bovine corneal permeability and activity of the compounds.

Oral hepatitis B vaccine formulation was prepared by successful encapsulation of immunogenic peptide representing residues 127–145 of the immunodominant B-cell epitope of hepatitis B surface antigen (HBsAg) in poly( d , l -lactide co-glycolide) (PLG) microparticles. The smooth, spherical PLG microparticles with a diameter of around 10 μm was prepared by using W/O/W double emulsion solvent evaporation method. The entrapment efficiency of B-cell epitope peptide (BCEP) into PLG microparticles was 64%. In vitro studies showed B-cell epitope loaded PLG microparticles (BCEM) released the peptide in sustained profile and reached 64.9% efficiency by Day 25. Single oral immunization of mice with BCEM led to the significant induction of specific serum IgG and IgM anti-HB antibodies. After the termination of antibody induction, the orally immunized mice were infected with HBsAg, which resulted in the rapid production of antibodies against HBsAg as a result of secondary immune response. PLG microparticles formulation approach may have potential in increasing the efficacy of microparticulate systems for the oral administration of hepatitis B vaccine.

An antifungal protein produced by Bacillus polymyxa strain VLB16 has been purified to homogeneity by ammonium sulfate precipitation and Sephadex-G-200 column chromatography. The purified protein inhibited the growth of Pyricularia grisea and Rhizoctonia solani , the causative agents of rice blast and sheath blight diseases, respectively. Microscopy studies revealed that the antifungal protein caused severe alterations in cell morphogenesis that gave rise to swollen and rounded hyphae. The protein was a monomer with molecular weight of 37 kDa in sodium dodecyl sulfate-poly acrylamide gel electrophoresis and gave a single symmetrical peak in gel permeation chromatography. The presence of predominant random coil structure and other conformations such as β-sheet and β-turn was noticed from Fourier transform infra red spectroscopy. The protein was heat stable and remained active after sterilization at 121 °C for 15 min. The antifungal protein was resistant to hydrolysis by pronase and also to many protein-denaturing detergents like sodium dodecyl sulfate (SDS), hexa decyl trimethyl ammonium bromide (HDTMA) and Tween-20. The extraordinary thermo-stability of the protein can be of good prospect to be used as a new tool for biocontrol.

Collagen is one of the best materials used for nerve guide preparation due to its biocompatibility and desirable tensile strength. In this work, we have compared regeneration and functional reinnervation after sciatic nerve resection with bioresorbable crosslinked collagen guides in 10 mm gap. The crosslinking was carried out either with glutaraldehyde (GTA) or microwave irradiation (MWI). The multilayered collagen membrane used for nerve guides are prepared by lamellar evaporation technique. Functional evaluations of the regenerated nerves were performed by measuring the sciatic functional index (SFI), nerve conduction velocity (NCV), and electromyography (EMG). Transmission electron microscopic studies showed growth of axonal cable with fewer myelinated axons, Schwann cells and more unmyelinated axons present in the case of group treated with uncrosslinked collagen tubes after 1 month of implantation. However, we have observed more myelinated axons in the case of autograft, GTA, and MWI crosslinked collagen tube implants across the gap of 1 cm after the same period of implantation. Smaller myelinated fiber diameter was observed in the case of GTA crosslinked collagen tube group when compared with the autograft and MWI collagen tube groups. There were more myelinated axons during the 3rd and 6th months postoperatively using these conduits as substantiated by light microscopic studies of the regenerated nerve. The conduction velocity and recovery index improved significantly after 5 months reaching the normal values in the autograft and MWI crosslinked collagen groups compared to GTA and uncrosslinked collagen tubes.

Successful nerve regeneration process was achieved with improved mechanical strength by crosslinking tubular nerve guides made up of collagen. The multilayered collagen sheets were prepared from laminar evaporation of collagen solution. Scanning electron micrograph of the collagen tubes crosslinked with glutaraldehyde (GTA), microwave irradiation showed porous, fibrillar structures of collagen filaments in these matrices. The mechanical property of the crosslinked collagen tubes was carried out by tensile strength measurements. Fourier transform infrared spectra of the collagen films show that the native triple helicity was unaltered during multilayered preparation. It was observed that the structural integrity is unaltered during the multilayer preparation. Microscopic analysis indicates that the tubule surface acts as a surface of adherence and proliferation for the sprouting axons from the cut proximal nerve stumps. Solute diffusion studies on these tubes indicate that they are highly porous to wide range of molecular sizes during regeneration. Among the two types of crosslinking, the microwave irradiated collagen conduits results in ample myelinated axons compared with GTA group, where we observed more unmyelinated axons.

This paper describes the regeneration of lesioned sciatic nerve with collagen tubes incorporated with RGD cell-adhesive peptide. Collagen implants of 14 mm were grafted to bridge a gap length of 10 mm nerve defect in a rat model. The regenerated tissues were analyzed histomorphologically. The number of myelinated axons in the regenerated mid-graft of the RGD peptide incorporated groups was statistically significant (p

Present study describes the development of a new formulation of levonorgestrel and ethinylestradiol based on double emulsion-solvent evaporation technique using poly(epsilon-caprolactone) (PCL) as biodegradable polymer. The effect of polymer concentration on microspheres and entrapment of drug into microspheres were studied. PCL was selected because of its hydrophobicity and advantages over other biodegradable polymers. Characterization of biodegradable polymer used for controlled drug delivery is essential to ensure reproducibility of in vitro and in vivo performances. The selected characterisation techniques established for PCL microspheres include its loading and entrapment efficiencies, DSC to analyse thermal behaviour, SEM to observe surface morphology, drug content of microspheres and in vitro release of drugs from microspheres. The SEM reports showed that microspheres were with smooth surface and DSC thermograms revealed no interaction between drug and polymer. The entrapment was found to be 58 and 47% for 1:10 and 1:5 batches and in vitro release studies showed that about 69.7% of LNG and 66.7% of EE from 1:10 batch and about 80% of LNG and 75.5% of EE from 1:5 batch for 150 days.

Two tetrapeptide derivatives [peptide A (Boc–Ala–Ile–Ile–Gly–OMe) and peptide B (Boc–Ala–Ile–Leu–Ser–OMe)], that take helical turn conformation in solution, were shown to form monolayer at the air/water interface. Circular dichroism (CD) measurements indicate that peptide A has more helical turn propensity than peptide B in sodium dodecyl sulphate (SDS) micelles. Langmuir–Blodgget film study of peptides A and B suggest that both the peptides form stable monolayer at the air/water interface. Spectroscopic investigations reveal that peptide A forms helical turn assemblage on transferring the film into hydrophilic quartz and hydrophobic ZnSe surfaces. Whereas, peptide B adopts β-sheet structure on hydrophilic surface and a mixture of β-sheet and helical turn conformation on hydrophobic surface.

Conformational transitions are thought to be the prime mechanism of amyloid formation in prion diseases. The prion proteins are known to exhibit polymorphic behavior that explains their ability of "conformation switching" facilitated by structured "seeds" consisting of transformed proteins. Oligopeptides containing prion sequences showing the polymorphism are not known even though amyloid formation is observed in these fragments. In this work, we have observed polymorphism in a 15-residue peptide PrP (113-127) that is known to form amyloid fibrils on aging. To see the polymorphic behavior of this peptide in different solvent environments, circular dichroism (CD) spectroscopic studies on an aqueous solution of PrP (113-127) in different trifluoroethanol (TFE) concentrations were carried out. The results show that PrP (113-127) have sheet preference in lower TFE concentration whereas it has more helical conformation in higher TFE content (40%). The structural transitions involved in TFE solvent were studied using interval-scan CD and FT-IR studies. It is interesting to note that the alpha-helical structure persists throughout the structural transition process involved in amyloid fibril formation implicating the involvement of both N- and C-terminal sequences. To unravel the role of the N-terminal region in the polymorphism of the PrP (113-127), CD studies on another synthetic peptide, PrP (113-120) were carried out. PrP(113-120) exhibits random coil conformation in 100% water and helical conformation in 100% TFE, indicating the importance of full-length sequence for beta-sheet formation. Besides, the influence of different chemico-physical conditions such as concentration, pH, ionic strength, and membrane like environment on the secondary structure of the peptide PrP (113-127) has been investigated. At higher concentration, PrP (113-127) shows features of sheet conformation even in 100% TFE suggesting aggregation. In the presence of 5% solution of sodium dodecyl sulfate, PrP (113-127) takes high alpha-helical propensity. The environment-dependent conformational polymorphism of PrP (113-127) and its marked tendency to form stable beta-sheet structure at acidic pH could account for its conformation switching behavior from alpha-helix to beta-sheet. This work emphasizes the coordinative involvement of N-terminal and C-terminal sequences in the self-assembly of PrP (113-127).

The conformational analysis of N-{N - [(tert-butyloxy) Carbonyl] -L- valyl} - N, N -dicyclohexyl urea 1 in DMSO-d6 has been performed using 1H NMR spectroscopic studies. The data provide evidence for the occurence of intramolecular hydrogen bonded NH of ureide proton. Two specific NOEs [NH (DCHU) ↔ CαH (Va1) and NH(Va1) ↔ CαH (Va1) prescribed the presence of β-turn conformation of compound 1 in DMSO-d6.