Search

Triboelectric generators rely on contact-generated surface charge transfer between materials with different electron affinities to convert mechanical energy into useful electricity. The ability to modify the surface chemistry of polymeric materials can therefore lead to significant enhancement of the triboelectric performance. Poly(methyl methacrylate) (PMMA) is a biocompatible polymer commonly used in medical applications, but its central position on the triboelectric series, which empirically ranks materials according to their electron-donating or electron accepting tendencies, renders it unsuitable for application in triboelectric generators. Here, we show that the surface potential of PMMA fibers produced by electrospinning can be tailored through the polarity of the voltage used during the fabrication process, thereby improving its triboelectric performance, as compared to typically spin-coated PMMA films. The change in surface chemistry of the electrospun PMMA fibers is verified using X-ray photoelectron spectroscopy, and this is directly correlated to the changes in surface potential observed by Kelvin probe force microscopy. We demonstrate the enhancement of triboelectric energy harvesting capability of the electrospun PMMA fibers, suggesting that this surface potential modification approach can be more widely applied to other materials as well, for improved triboelectric performance.

Summary Force sensors that are thin, low-cost, flexible, and compatible with commercial microelectronic chips are of great interest for use in biomedical sensing, precision surgery, and robotics. By leveraging a combination of microfluidics and capacitive sensing, we develop a thin, flexible force sensor that is conformable and robust. The sensor consists of a partially filled microfluidic channel made from a deformable material, with the channel overlaying a series of interdigitated electrodes coated with a thin, insulating polymer layer. When a force is applied to the microfluidic channel reservoir, the fluid is displaced along the channel over the electrodes, thus inducing a capacitance change proportional to the applied force. The microfluidic molds themselves are made of low-cost sacrificial materials deposited via aerosol-jet printing, which is also used to print the electrode layer. We envisage a large range of industrial and biomedical applications for this force sensor., Graphical abstract, Highlights Highly flexible, capacitive force sensors based on microfluidics Linear capacitance response to applied force Rapid prototyping of low-cost and robust force sensors via aerosol-jet printing Tunable design for various sensitivities and force measurement ranges, Jing et al. report a thin, conformable force sensor based on a combination of microfluidics and capacitive sensing. The low-cost sensor is fabricated via aerosol-jet printing and shows a highly linear response with adjustable design parameters for tunable sensitivities and force ranges.

Balancing forces within weight-bearing joints such as the hip during joint replacement surgeries is essential for implant longevity. Minimising implant failure and the corresponding need for expensive and difficult revision surgery is vital to both improve patient quality of life and lighten the burden on overstretched healthcare systems. However, force balancing during total hip replacements is presently entirely dependent on surgical skill, as there are no sensors capable of providing quantitative force feedback within the small and complex geometry of the hip joint. Here, we solve this unmet clinical need by presenting a thin and conformable microfluidic force sensor, which is compatible with the standard surgical process. The sensors are fabricated via additive manufacturing, using a combination of 3D and aerosol-jet printing. We optimised the design using finite element modelling, then incorporated and calibrated our sensors in a 3D printed model hip implant. Using a bespoke testing rig, we demonstrated high sensitivity at typical forces experienced during hip replacements. We anticipate that these sensors will aid implant positioning, increasing the lifetime of hip replacements, and represent a powerful new surgical tool for a range of orthopaedic procedures where force balancing is crucial.

Dynamic microscale surface topographies are desired in smart optics, controlling surface wettability and preventing marine biofouling. Voltage-controlled reversible responses have demonstrated potential for reliable reproducibility and stability, fast response, and for actuating thin films fixed over large solid surfaces. To obtain reversible deformation with regular geometric patterns, however, electrical methods have had to be coupled with mechanical stretching/bending and other ways to induce anisotropy. There is a great need and potential for on-demand electrical generation of programmable complex responsive surface patterns. Here we demonstrate a responsive polymer coating over an underlying pattern of counter electrodes which can be activated selectively. We present a patternable electrode printing method to achieve localized and structured wrinkling deformation without mechanical pre-force deformation. We discover that below a minimal separation distance, electrodes below the polymer act as a single electrode. We establish parameters that govern the alignment of wrinkles and quantify the regularity and direction of the new patterns between electrodes separated by larger than this distance. We analyze and quantify the regularity of the formed wrinkling patterns by four disorder metrics: box-counting fractal dimension, tortuosity, angle distribution, and branch number. We demonstrate the application of such electrode/wrinkles-on-demand patterning with a working multi-state light reflection–diffusion–grating device.

Force sensors that are thin, low cost, flexible and compatible with commercial microelectronic chips are of great interest for use in biomedical sensing, precision surgery, robotics and in various “smart control” technologies. By leveraging a novel combination of microfluidics and capacitive sensing we have developed a thin, flexible force sensor that is conformable and robust. The sensor consists of a partially filled microfluidic channel made from a deformable material, with the channel overlaying a series of interdigitated electrodes that are coated with a thin polymer layer for insulation. When a force is applied to a fluid reservoir at the base of the channel, the fluid is displaced along the channel, passing over the electrodes and thus inducing a capacitance change, which is proportional to the amount of force applied. The microfluidic molds themselves are made of low-cost sacrificial material inks deposited via aerosol-jet printing, which is also used to print the electrode layer. The sensors exhibit a nearly linear change in capacitance in response to external load, with a sensitivity of up to 3.8 pF/N and a force range of up to 9 N achieved with the present design. We quantify the effects of changing the electrode morphology, liquid permittivity, sensor thickness and geometry, as well as the thickness of the insulation layer over the electrodes, on sensor range and sensitivity, using a combination of experiments and finite element analysis simulations. We further demonstrate how the sensor can be used to remotely control a robotic clamp. The conformable force sensors developed here are thin, flexible and facilitate easy signal processing. The fabrication processes are low-cost, amenable to fast prototyping and mass manufacturing. We envisage a large range of industrial and biomedical applications for this novel force sensor.

Electrical polarization phenomena in GaN are important as they have significant impact on the operation of modern day energy efficient lighting and are fundamental to GaN-based high power and high frequency electronics. Controlling polarization is beneficial for the optimization of these applications. GaN is also piezoelectric, and therefore mechanical stress and strain are possible handles to control its polarization. Nonetheless, polar semiconductors in general, and GaN in particular, are weak piezoelectric materials when compared to ceramics, and are therefore not considered for characteristic electromechanical applications such as sensing, actuation and mechanical energy harvesting. Here, we examine the effect of nanoscale porosity on the piezoelectricity of initially conductive GaN. We find that for 40% porosity, the previously conductive GaN layer becomes depleted, and exhibits enhanced piezoelectricity as measured using piezoresponse force microscopy, as well as by using a mechanical energy harvesting setup. The effective piezoelectric charge coefficient of the porous GaN, d33,eff, is found to be about 8 pm/V which is 2-3 times larger than bulk GaN. A macroscale device comprising a porous GaN layer delivered 100 nW/cm2 across a resistive load under a 150 kPa mechanical excitation. We performed finite element simulations to analyze the evolution of the piezoelectric properties with porosity. The simulations suggest that increased mechanical compliance due to porosity gives rise to the observed enhanced piezoelectricity in GaN. Furthermore, the simulations show that for stress-based excitations, the porous GaN electromechanical figure of merit is increased by an order of magnitude and becomes comparable to that of barium titanate piezoceramics. In addition, considering the central role played by GaN in modern electronics and optoelectronics, our study validates a very promising research direction when considering stress-based electromechanical applications which combine GaN's semiconducting and piezoelectric properties.

Surface potential of biomaterials is a key factor regulating cell responses, driving their adhesion and signaling in tissue regeneration. In this study we compared the surface and zeta potential of smooth and porous electrospun polycaprolactone (PCL) fibers, as well as PCL films, to evaluate their significance in bone regeneration. The ’ surface potential of the fibers was controlled by applying positive and negative voltage polarities during the electrospinning. The surface properties of the different PCL fibers and films were measured using X-ray photoelectron spectroscopy (XPS) and Kelvin probe force microscopy (KPFM), and the zeta potential was measured using the electrokinetic technique. The effect of surface potential on the morphology of bone cells was examined using advanced microcopy, including 3D reconstruction based on a scanning electron microscope with a focused ion beam (FIB-SEM). Initial cell adhesion and collagen formation were studied using fluorescence microscopy and Sirius Red assay respectively, while calcium mineralization was confirmed with energy-dispersive x-ray (EDX) and Alzarin Red staining. These studies revealed that cell adhesion is driven by both the surface potential and morphology of PCL fibers. Furthermore, the ability to tune the surface potential of electrospun PCL scaffolds provides an essential electrostatic handle to enhance cell-material interaction and cellular activity, leading to controllable morphological changes.

We employ a fluctuation-based technique to investigate the athermal component associated with martensite phase transition, which is a prototype of temperature-driven structural transformation. Statistically, when the phase transition is purely athermal, we find that the temporal sequence of avalanches under constant drive is insensitive to the drive rate. We have used fluctuations in electrical resistivity or noise in nickel titanium shape memory alloys in three different forms: a thin film exhibiting well-defined transition temperatures,a highly disordered film, and a bulk wire of rectangular cross-section. Noise is studied in the realm of dynamic transition,viz.while the temperature is being ramped, which probes into the kinetics of the transformation at real time scales,and could probably stand out as a promising tool for material testing in various other systems, including nanoscale devices.