Search

This paper presents a two dimensional force sensor fabricated on PDMS nanocomposite, with patterned carbon nanotubes (CNTs) acting as a force sensing unit. A novel fabrication method is composed of inkjet printing of CNTs onto polyethylene terephthalate (PET) and subsequent transfer of the CNT patterns to PDMS, resulting in a CNT-elastomer nanocomposite that is flexible and conductive. This approach allows patterning of a large-area conductive carbon nanotube pattern on PDMS. The achieved sheet resistance of the transferred patterns on PDMS was 1.2k/ when printed 35 times, using an office inkjet printer. The fabricated sensor changes its resistance when force is applied perpendicularly to the sensor. A two dimensional force sensor, working on the principle of compression-induced deformation was fabricated and characterized with achieved resolution of four sensing cells per cm2. Additionally, we demonstrate a two dimensional flexible force sensor capable of creating a pressure map of the applied force. Together with inkjet printing, this pattern transfer process represents a highly effective patterning technique for embedding carbon nanotubes in PDMS. Display Omitted A transfer printing technique has been developed to pattern embedded carbon nanotubes onto PDMS.Patterns show good uniformity, forming an embedded CNT network.A highly flexible two dimensional force sensor has been demonstrated, showing the pressure map applied.

© 2019 The Authors Although health, development, and environment challenges are interconnected, evidence remains fractured across sectors due to methodological and conceptual differences in research and practice. Aligned methods are needed to support Sustainable Development Goal advances and similar agendas. The Bridge Collaborative, an emergent research-practice collaboration, presents principles and recommendations that help harmonize methods for evidence generation and use. Recommendations were generated in the context of designing and evaluating evidence of impact for interventions related to five global challenges (stabilizing the global climate, making food production sustainable, decreasing air pollution and respiratory disease, improving sanitation and water security, and solving hunger and malnutrition) and serve as a starting point for further iteration and testing in a broader set of contexts and disciplines. We adopted six principles and emphasize three methodological recommendations: (1) creation of compatible results chains, (2) consideration of all relevant types of evidence, and (3) evaluation of strength of evidence using a unified rubric. We provide detailed suggestions for how these recommendations can be applied in practice, streamlining efforts to apply multi-objective approaches and/or synthesize evidence in multidisciplinary or transdisciplinary teams. These recommendations advance the necessary process of reconciling existing evidence standards in health, development, and environment, and initiate a common basis for integrated evidence generation and use in research, practice, and policy design.

Display Omitted Inkjet printing method was used to pattern a conducting polymer nanowire network.Nanowire morphology and electrical properties were preserved even after printing.A printed chemiresistive pH sensor and hydrogen peroxide sensor were demonstrated.Potential applications include print-and-use disposable biochemical sensors. This work reports an inkjet printing technique for patterning a conducting polymer nanowire network on a flexible film for applications in chemical sensing. The novelty of this work is in the patterning capability of polymer nanowires to form a conducting path. Polyaniline nanowires were chemically synthesized in an aqueous solution and a surfactant was added to lower the surface tension which enabled the printing of the nanowires using a commercially available inkjet printer. The nanowire network-based patterns were printed on a flexible transparency film, and its morphology characterization, patterning ability as well as the electrical properties were investigated. Finally, as a proof-of-concept, a fully-printed chemical sensors were developed by using the proposed printing technique on flexible films. Two types of sensors were fabricated: a pH sensor and a hydrogen peroxide sensor. The results demonstrate that the developed sensors can be utilized as a low cost, disposable, and easily printable chemical sensors. The proposed technology may find applications in the development of a simple print-and-use biochemical sensing kit for potential use in point-of-care diagnostics.