Search

Factor XIa, as a blood coagulation enzyme, amplifies the generation of the last enzyme thrombin in the blood coagulation cascade. It was proved that direct inhibition of factor XIa could reduce pathologic thrombus formation without an enhanced risk of bleeding. WSJ-557, a nonpurine imidazole-based xanthine oxidase inhibitor in our previous reports, could delay blood coagulation during its animal experiments, which prompted us to investigate its action mechanism. Subsequently, during the exploration of the action mechanism, it was found that WSJ-557 exhibited weak in vitro factor XIa binding affinity. Under the guide of molecular modeling, we adopted molecular hybridization strategy to develop novel factor XIa inhibitors with WSJ-557 as an initial compound. This led to the identification of the most potent compound 44g with a Ki value of 0.009 μM, which was close to that of BMS-724296 (Ki = 0.0015 μM). Additionally, serine protease selectivity study indicated that compound 44g display a desired selectivity, more 400-fold than those of thrombin, factor VIIa and factor Xa in coagulation cascade. Moreover, enzyme kinetics studies suggested that the representative compound 44g acted as a competitive-type inhibitor for FXIa, and molecular modeling revealed that it could tightly bind to the S1, S1′ and S2′ pockets of factor XIa. Furthermore, in vivo efficacy in the rabbit arteriovenous shunt model suggested that compound 44g demonstrated dose-dependent antithrombotic efficacy. Therefore, these results supported that compound 44g could be a potential and efficacious agent for the treatment of thrombotic diseases.

Xanthine oxidase is the rate-limiting enzyme critical for the synthesis of uric acid, and therefore xanthine oxidase inhibitors are considered as one of the promising therapies for hyperuricemia and gout. In our previous study, series of 2-(4-alkoxy-3-cyano)phenyl-6-oxo-1,6-dihydropyrimidine-5-carboxylic acids and 2-(4-alkoxy-3-cyano)phenyl-6-imino-1,6-dihydropyrimidine-5-carboxylic acids were synthesized that presented excellent in vitro xanthine oxidase inhibitory potency. Interestingly, molecular docking studies revealed that the interaction behavior of these compounds with xanthine oxidase was changed after the conversion from a hydroxy group to amine group. To further investigate the structure–activity relationships of these pyrimidine-containing xanthine oxidase inhibitors and explore the contribution of amino or hydroxy group on xanthine oxidase inhibitory potency, several 2-phenylpyrimidine derivatives with amino or hydroxy functional group were designed and synthesized. Thereafter, the structure–activity research and molecular modeling study proved that hydroxy and amino groups could be used as pharmacophore elements for the design of 2-phenylpyrimidines xanthine oxidase inhibitors. Particularly, the optimized compound, 2-(3-cyano-4-isopentoxy)phenylpyrimidine-4-ol, emerged the strongest xanthine oxidase inhibitor potency, with an IC50 value of 0.046 µM, which was approximately 120-fold more potent than that of allopurinol (IC50 = 5.462 µM). Additionally, Lineweaver-Burk plot analysis revealed that the optimized compound acted as a mixed-type inhibitor. Furthermore, the in vivo hypouricemic effect of the optimized compound was investigated in a hyperuricemia rat model induced by potassium oxonate, and the results showed that the optimized compound could effectively reduce serum uric acid levels at an oral dose of 30 mg/kg.

Xanthine oxidase (XO) has emerged as an important target for the treatment of hyperuricemia and gout. In this study, to obtain novel nonpurine XO inhibitors, a series of 1-alkyl-5/6-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)-1H-indole-3-carbonitriles (1a-1u, 2c, 2e, 2h and 2n) were designed using a bioisosteric replacement strategy and were synthesized through a five-step procedure with good yields. Thereafter, the in vitro XO inhibitory potencies of these compounds were evaluated by spectrophotometry, showing inhibitory profiles in the micromolar/submicromolar range. Particularly, compound 1h emerged as the strongest XO inhibitor, with an IC50 value of 0.36 μM, which was approximately 21-fold more potent than the positive control allopurinol. Additionally, the structure-activity relationships revealed that the 5-oxo-4,5-dihydro-1,2,4-oxadiazole moiety linked at the 5-position of the indole scaffold was more preferable than the 6-position for the XO inhibitory potency. Enzyme kinetic studies indicated that compound 1h acted as a mixed-type XO inhibitor. Moreover, molecular modeling studies were performed on compound 1h to gain insights into its binding modes with XO. The results showed that the 5-oxo-4,5-dihydro-1,2,4-oxadiazole moiety could interact with Arg880 and Thr1010 in the innermost part of the active pocket through hydrogen bonds, while the cyano group could form hydrogen bonds with Asn768 and Lys771 in the subpocket. Furthermore, the in vivo hypouricemic effect of compound 1h was further investigated in a hyperuricemia rat model induced by potassium oxonate. The results suggested that compound 1h could effectively reduce serum uric acid levels at an oral dose of 10 mg/kg. Therefore, compound 1h could be a promising lead compound for the treatment of hyperuricemia and gout.

Xanthine oxidase (XO) is a critical target for the therapy of hyperuricemia and gout. In this study, a number of 3-[4-alkoxy-3-(1H-tetrazol-1-yl) phenyl]-1,2,4-oxadiazol-5(4H)-ones (3a–3w) were newly designed by a bioisosteric replacement and hybrid strategy with the hope of obtaining novel and effective nonpurine XO inhibitors. Subsequently, these compounds were synthesized through a three-step procedure, with good yields. In addition, the in vitro bovine XO inhibitions were measured by spectrophotometric determination of uric acid formation at 295 nm using allopurinol as a positive control. As a result, compound 3j was found to be the most potent XO inhibitor, with an IC50 value of 0.121 µM, which was approximately 63-fold more potent than allopurinol, and the analysis of the structure-activity relationships indicated that the hydrophobic group at 4′-position was essential for inhibitory potency. Additionally, the molecular modeling results showed that the 1,2,4-oxadiazol-5(4H)-one moiety binds to XO active site via various hydrogen bonds with Arg880 and Thr1010. Moreover, the compound 3j was demonstrated to be a mixed-type nonpurine XO inhibitor. Furthermore, the hypouricemic studies on a rat model, induced by potassium oxonate, demonstrated that serum uric acid levels could be effectually reduced by compound 3j at an oral dose of 15 mg/kg. Therefore, compound 3j could be a promising lead compound for the treatment of hyperuricemia and gout.

Xanthine oxidase is an important target for the treatment of hyperuricemia, gout and other related diseases. Analysis of the high-resolution structure of xanthine oxidase with febuxostat identified the existence of a subpocket formed by the residues Leu648, Asn768, Lys771, Leu1014 and Pro1076. In this study, we designed and synthesized a series of 2-[4-alkoxy-3-(1H-tetrazol-1-yl) phenyl]-6-oxo-1,6-dihydropyrimidine-5-carboxylic acid derivatives (8a-8z) with a tetrazole group targeting this subpocket of the xanthine oxidase active site, and they were further evaluated for their inhibitory potency against xanthine oxidase in vitro. The results showed that all the tested compounds (8a-8z) exhibited an apparent xanthine oxidase inhibitory potency, with IC50 values ranging from 0.0288 μM to 0.629 μM. Among them, compound 8u emerged as the most potent xanthine oxidase inhibitor, with an IC50 value of 0.0288 μM, which was comparable to febuxostat (IC50 = 0.0236 μM). The structure-activity relationship results revealed that the hydrophobic group at the 4′-position was indispensable for the inhibitory potency in vitro against xanthine oxidase. A Lineweaver-Burk plot revealed that the representative compound 8u acted as a mixed-type inhibitor for xanthine oxidase. Furthermore, molecular modeling studies were performed to gain insights into the binding mode of 8u with xanthine oxidase and suggested that the tetrazole group of the phenyl unit was accommodated in the subpocket, as expected. Moreover, a potassium oxonate-induced hyperuricemia model in rats was chosen to further confirm the hypouricemic effect of compound 8u, and the result demonstrated that compound 8u could effectively reduce serum uric acid levels at an oral dose of 5 mg/kg. In addition, acute oral toxicity study in mice indicated that compound 8u was nontoxic and tolerated at a dose up to 2000 mg/kg. Thus, compound 8u could be a potential and efficacious agent in treatment of hyperuricemia with low toxicity.

In our previous study, we reported a series of 1-hydroxy-2-phenyl-1H-imidazole-5-carboxylic acid derivatives that presented excellent in vitro xanthine oxidase (XO) inhibitory potency. To further investigate the structure-activity relationships of these compounds, the imidazole ring was transformed to a pyrimidine ring to design 2-(4-alkoxy-3-cyano)phenyl-6-oxo-1,6-dihydropyrimidine-5-carboxylic acids (8a-8j), 2-(4-alkoxy-3-cyano)phenyl-4-methyl-6-oxo-1,6-dihydropyrimidine-5-carboxylic acids (9c, 9e, 9j, 9l) and 2-(4-alkoxy-3-cyano)phenyl-6-imino-1,6-dihydropyrimidine-5-carboxylic acids (10c, 10e, 10j, 10l). These compounds exhibited remarkable in vitro XO inhibitory potency with IC50 values ranging from 0.0181 μM to 0.5677 μM. Specifically, compounds 10c and 10e, with IC50 values of 0.0240 μM and 0.0181 μM, respectively, emerged as the most potent XO inhibitors, and their potencies were comparable to that of febuxostat. Structure-activity relationship analysis revealed that the methyl group at 4-position of pyrimidine ring could damage the potency, and the XO inhibitory potency was maintained when carbonyl group was changed to an imino group. Lineweaver-Burk plot analysis revealed that the representative compound 10c acted as a mixed-type inhibitor. A potassium oxonate induced hyperuricemia model in rats was chosen to further confirm the hypouricemic effect of compound 10c, and the results showed that compound 10c (5 mg/kg) was able to significantly lower the serum uric acid level. Furthermore, in acute oral toxicity study, no sign of toxicity was observed when the mice were administered with a single 2000 mg/kg oral dose of compound 10c. These results suggested that compound 10c was a potent and promising uric acid-lowing agent for the treatment of hyperuricemia.

When a Helmholtz resonator is exposed to grazing flow, an unstable shear layer at the opening can cause the occurrence of acoustic resonance under appropriate conditions. In this paper, in order to suppress the flow-induced resonance, the effects of inside acoustic liners placed on the side wall or the bottom of a Helmholtz resonator are investigated. Based on the one-dimensional sound propagation theory, the time domain impedance model of a Helmholtz resonator with inside acoustic liner is derived, and then combined with a discrete vortex model the resonant behavior of the resonator under grazing flow is simulated. Besides, an experiment is conducted to validate the present model, showing significant reduction of the peak sound pressure level achieved by the use of the side-wall liners. And the simulation results match reasonably well with the experimental data. The present results reveal that the inside acoustic liner can not only absorb the resonant sound pressure, but also suppress the fluctuation motion of the shear layer over the opening of the resonator. In all, the impact of the acoustic liners is to dampen the instability of the flow-acoustic coupled system. This demonstrates that it is a convenient and effective method for suppressing Helmholtz resonance by using inside acoustic liner.

The acoustical response of a slit with a mean bias flow is numerically studied. By means of a potential flow model based on the discrete vortex method and a spanwise-averaged three-dimensional Green׳s function, both unsteady vortical flow and slit impedance are obtained in a unified theoretical framework. The numerical simulation focuses on the acoustic-excited vortex structures of the slit flow while neglecting the viscous damping effect. Three representative flow features are demonstrated, which are the destabilized jet flow, the rolling up of vortex sheets and formation of vortex pairs, and the reversal flow with alternating vortex shedding on both sides of the slit. These features are corresponding to low, moderate, and high sound amplitude, respectively. The acoustic behavior of the slit can be divided into linear, transition, and nonlinear regimes. During its evolution through the three regimes, the resistance exhibits a constant value, a slight decrease, and a significant increase with the increasing sound amplitude. Correspondingly, the reactance first remains constant and then shows a modest decrease as the sound amplitude increases. The nonlinear effect also causes the gradual decrease of the mean bias velocity in company with the marked increase of the amplitude of the fluctuating velocity in the slit. The mean bias velocity decreases to about 80 percent of its linear value at the transition point where reversal flow begins to occur, and further decreases to only 10 percent in the highly nonlinear region. The slit impedance is also presented as a function of frequency and for different aspect ratios. And the effects of frequency and slit geometry are discussed.

Hydrodynamic journal bearings under large perturbations go beyond the serviceable range of the linear theory and thus should be treated as nonlinear systems. Three kinds of nonlinear oil-film force models (24-co., 28-co. and 36-co. models) are proposed to denote the oil-film forces by retaining certain terms of Taylor series expansion of the oil-film force. A least-mean squares method in time domain is proposed to identify the oil-film coefficients. The study shows that these three nonlinear models are feasible to describe the oil-film forces and reliable linear oil-film coefficients can be identified from these models.