Search

Bioelectrochemical system is an emerging technology for the remediation of soils contaminated by petroleum hydrocarbons. However, performance of such systems can be limited by the inefficient mass transport in soil. Here we report a new method of sand amendment, which significantly increases both oxygen and proton transports, resulting to increased soil porosity (from 44.5% to 51.3%), decreased Ohmic resistance (by 46%), and increased charge output (from 2.5 to 3.5Cg(-1)soil). The degradation rates of petroleum hydrocarbons increased by up to 268% in 135d. The degradation of n-alkanes and polycyclic aromatic hydrocarbons with high molecular weight was accelerated, and denaturing gradient gel electrophoresis showed that the microbial community close to the air-cathode was substantially stimulated by the induced current, especially the hydrocarbon degrading bacteria Alcanivorax. The bioelectrochemical stimulation imposed a selective pressure on the microbial community of anodes, including that far from the cathode. These results suggested that sand amendment can be an effective approach for soil conditioning that will enhances the bioelectrochemical removal of hydrocarbons in contaminated soils.

Stainless steel mesh (SSM) with four opening sizes (20–80 M) were investigated as matrixes of activated carbon air–cathodes in microbial fuel cells (MFCs). The highest power density of 2151 ± 109 mW m −2 (at 5.54 ± 0.14 A m −2 ) was obtained using 40 M, with a value 45% higher than 1485 ± 18 mW m −2 of 80 M. The trend of linear sweep voltammetries were in accordant with power output over a cathodic potential range from −0.2 to 0 V. The differences in performance were attributed to the internal resistances. Charge transfer resistance ( R ct ) was the dominant internal resistance in most of air–cathodes, with the lowest value of 2 Ω in 40 M. Density of metal mesh exhibited a more significant correlationship with maximum power densities ( R 2 = 0.9222) compared to opening size ( R 2 = 0.7068), demonstrated that the density of metal current collector was vital to the performance of cathodes.