Search

Sugar beet pulp, a byproduct from sugar beet refining, is used by farmers as fertilizer or sold as animal feed. Both options underestimate the potential of sugar beet pulp as a platform to produce specialty and bulky chemicals as a promising pathway for sustainable biochemicals - mind the pulp. This study proposes a biorefinery concept to produce food additives (pectin-derived oligosaccharides) and bulky chemicals (terephthalic acid). Since the biorefinery has a low technology readiness level (TRL = 1), it is relevant to evaluate the feasibility of this biorefinery concept to provide guidance (at an early stage) on the environmental and economic advantages and limitations. For this purpose, the life cycle assessment and techno-economic assessment frameworks are used to assess the environmental impact and economic performance of the biobased terephthalic acid, respectively. Moreover, environmental impacts are accounted for in economic terms using different monetary valuation methods (environmental prices, Ecovalue12, and Ecotax). The environmental impact of biobased terephthalic acid was higher in most impact categories than the fossil counterpart, depending on the selected allocation approach (mass vs economic). The economic feasibility of the proposed biorefinery is highly dependent on the pectin-derived oligosaccharides market price and the valorization of byproducts (humins and levulinic acid). The selection of the monetary valuation method is critical for monetizing environmental impacts when comparing biobased against fossil-based alternatives.Copyright © 2022 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Low methoxy pectin (LM pectin) suffers from burst release owing to its high swellability and solubility in water. Consequently, in ways to design an ideal drug delivery system, these obstacles must be surmounted. Therefore, the work aimed to design dual crosslinked LM pectin -neem gum (NG) mediated interpenetrating polymer network (IPN) floating mucoadhesive microbeads for lansoprazole (LNZ) gastro-retentive delivery. In short, LNZ-loaded floating microbeads were achieved by using the ionic gelation method wherein zinc acetate was preferred as a crosslinking agent. The optimization of IPN microbeads was performed employing a 3

The applications of cryogels are defined by their porous morphology as well as mechanical properties. To achieve efficient regulation of porous properties for pectin cryogels, we selected starch as a potential polysaccharide regulator. Pectin/starch composite cryogels with different degrees of gelatinization were formulated, and two ways of starch gelatinization were considered: starch gelatinization occurred before or after pectin crosslinking during forming the hydrogel network. The results showed that high gelatinized starch (73.8 %-100.0 %) rendered pectin cryogels with denser pore morphology and higher mechanical strength. The pore diameter transferred from 160-200 μm to 40-60 μm with the degree of gelatinization, while the total porosity decreased by about 15 % and the specific surface area increased by about 100 m

A novel range of microgel particles of different internal cross-linking densities can be created by covalently cross-linking sugar beet pectin (SBP) with the enzyme laccase and mechanically breaking down the subsequent parent hydrogels to sugar beet pectin microgels (SBPMG) via shearing. The bulk rheological properties of suspensions of the different SBPMG are expected to depend on the microgel morphology, elasticity (crosslinking density) and volume fraction respectively.The rheology of both dilute and concentrated dispersions of SBPMG were studied in detail via capillary viscometry and shear rheometry, supplemented by information on particle size and shape from static light scattering, confocal microscopy and electron microscopy.For dilute suspensions of SBPMG, data for viscosity versus effective volume fraction (ɸ

As a potential source of pectin, the peel of dragon fruit is a by-product of fruit processing and will bring considerable economic benefits. In this study, pectin (DFP) was extracted from dragon fruit peel by using a hot-acid method, and two commercial pectins were used as controls to correlate structural differences with physical and chemical properties through systematic evaluation. The galacturonic acid (GalA) content, degree of esterification (DM) and molecular weight (Mw) of DFP were 87.02 ± 0.89 %, 37.26 ± 1.37 % and 1181.75 ± 11.21 kDa, respectively. The FTIR and XRD analysis also confirmed that DFP is ultra-low methoxylated pectin and also contains characteristic functional groups naturally present in pectin. Compared to APA140 and LMP, DFP showed excellent emulsification at low concentrations. In particular, the extraordinary antioxidant activity of DFP may be attributed to polyphenols in free or bound form. Overall, DFP can be considered as a promising emulsifier and the results of the study provide an alternative to natural sources of emulsifiers in the food industry.

Ammonium promotes rice P uptake and reutilization better than nitrate, under P starvation conditions; however, the underlying mechanism remains unclear. In this study, ammonium treatment significantly increased putrescine and ethylene content in rice roots under P deficient conditions, by increasing the protein content of ornithine decarboxylase and 1-aminocyclopropane-1-carboxylic acid (ACC) oxidase compared with nitrate treatment. Ammonium treatment increased rice root cell wall P release by increasing pectin content and pectin methyl esterase (PME) activity, increased rice shoot cell membrane P release by decreasing phosphorus-containing lipid components, and maintained internal P homeostasis by increasing OsPT2/6/8 expression compared with nitrate treatment. Ammonium also improved external P uptake by regulating root morphology and increased rice grain yield by increasing the panicle number compared with nitrate treatment. The application of putrescine and ethylene synthesis precursor ACC further improved the above process. Our results demonstrate for the first time that ammonium increases rice P acquisition, reutilization, and homeostasis, and rice grain yield, in a putrescine- and ethylene-dependent manner, better than nitrate, under P starvation conditions.

Pectin-Zn-alginate gel particles from callus culture pectin with increased linearity and decreased rhamnogalacturonan I branching and degree of methylesterification had a higher gel strength and encapsulation capacity. An increase of the alginate concentration led to an increase in the particle gel strength. The grape seed extract (GSE) loaded and empty particles swelled slightly in the simulated gastric fluid (SGF) and gradually in the intestinal (SIF) fluid. The swelling degrees of the GSE-loaded and empty particles in the simulated colonic fluids (SCF) were decreased in the range SCF-7.0 (pH 7.0 + pectinase) SCF-5.3 (pH 5.3 + pectinase) SCF-2.3 (pH 2.3 + pectinase). The FTIR spectra indicated that GSE was embedded in the composite particles. Negligible leakage of GSE in SGF was shown. The increase in GSE release in SIF was due to the decrease in particle gel strength and increased swelling degree. The GSE release in fluids simulating the colon inflammation (SCF-2.3 and SCF-5.3) was similar, and it was lower than that in the SCF-7.0 simulating a healthy colon due to the increased gel strength. The percentage release of GSE increased slightly after exposure to different pH. Pectin-Zn-alginate hydrogel systems may be promising candidates for colon-targeted GSE delivery systems.

Plant cell walls display cellular and subcellular specificities. At the subcellular level, wall regional territories with specific compositions are necessary for macroscopic developmental processes. These regional specificities were named differently throughout the years, and are unified here under the term 'cell-wall microdomains' that define the local composition and organization of wall polymers underlying territories of wall loosening and/or softening or stiffening. We review the occurrence and developmental role of wall microdomains in different cell types. We primarily focus on the contribution of two categories of wall-remodeling molecular actors: fine-tuning of homogalacturonan (HG; pectin) demethylesterification patterns and two classes of oxidoreductases [class III peroxidases (CIII PRXs) and laccases (LACs)], but we also highlight two different molecular scaffolds recently identified for positioning specific CIII PRXs.

The human intestinal system is a complex of various anaerobes including extremely oxygen-sensitive (EOS) bacteria, some of which have been credited with significant health benefits. Among these, Faecalibacterium prausnitzii, which is one of the most abundant anaerobic bacterial strains in the human intestinal tract, has been proved to be a promising probiotic for the treatment of inflammatory bowel diseases. However, because of its extremely sensitive nature, there are many difficulties when passing through the harsh environment of the gastrointestinal tract. Hence, in this study, a comprehensive physicochemical characterization was performed for the use of polysaccharides from several origins (hydroxypropyl methyl cellulose, methyl cellulose, hydroxypropyl cellulose, chitosan, low-methoxylated pectin, kappa-carrageenan, sodium alginate and pullulan) as encapsulating agents to protect and deliver this bacterium. First, the apparent viscosity and surface tension of the polymer solutions were tested. Then, the mechanical properties, water vapor and oxygen barrier properties of these biopolymers as self-standing films were investigated. Lastly, in vitro release profiles of small molecules and bacterial cells from these biopolymer matrices in contact with a simulated gastrointestinal tract were evaluated. The results showed that chitosan, low-methoxylated pectin, kappa-carrageenan, sodium alginate and pullulan films exhibited good oxygen barrier properties to protect EOS probiotics. Among all the biopolymers tested, sodium alginate exhibited the best oxygen barrier properties and release profile. The release kinetics can be modulated by several factors including biopolymer type, plasticizer concentration and active molecules or bacteria to be encapsulated. On that basis and integrating the other parameters analyzed, a multicriteria strategy for probiotic encapsulation was proposed.

Chronic constipation is a prevalent disorder that remains challenging to treat. Studies suggest increasing fiber intake may improve symptoms, although recommendations on the fiber type, dose, and treatment duration are unclear.We investigated the effects of fiber supplementation on stool output, gut transit time, symptoms, and quality of life in adults with chronic constipation via a systematic review and meta-analysis of randomized controlled trials (RCTs).Studies were identified using electronic databases, backward citation, and hand searches of abstracts. RCTs reporting administration of fiber supplementation in adults with chronic constipation were included. Risks of bias (RoB) was assessed with the Cochrane RoB 2.0 tool. Results were synthesized using risk ratios (RRs), mean differences, or standardized mean differences (SMDs) and 95% CIs using a random-effects model.Sixteen RCTs with 1251 participants were included. Overall, 311 of 473 (66%) participants responded to fiber treatment and 134 of 329 (41%) responded to control treatment [RR: 1.48 (95% CI: 1.17, 1.88; P = 0.001); I2 = 57% (P = 0.007)], with psyllium and pectin having significant effects. A higher response to treatment was apparent in fiber groups compared to control groups irrespective of the treatment duration, but only with higher fiber doses (10 g/d). Fiber increased stool frequency [SMD: 0.72 (95% CI: 0.36, 1.08; P = 0.0001); I2 = 86% (P 0.00001)]; psyllium and pectin had significant effects, and improvement was apparent only with higher fiber doses and greater treatment durations (≥4 weeks). Fiber improved stool consistency (SMD: 0.32; 95% CI: 0.18, 0.46; P 0.0001), particularly with higher fiber doses. Flatulence was higher in fiber groups compared to control groups(SMD: 0.80; 95% CI: 0.47, 1.13; P 0.00001).Fiber supplementation is effective at improving constipation. Particularly, psyllium, doses10 g/d and treatment durations of at least 4 weeks appear optimal, though caution is needed when interpreting the results due to considerable heterogeneity. These findings provide promising evidence on the optimal type and regime of fiber supplementation, which could be used to standardize recommendations to patients. The protocol for this review is registered at PROSPERO as CRD42020191404.

Pectin has recently attracted increasing attention as an alternative biomaterial commonly used in biomedical and pharmaceutical fields. It shows several promising properties, including good biocompatibility, health benefits, nontoxicity, and biodegradation. In this research, novel nanocomposite fibers composed of folic acid-decorated carbon dots (CDs) in pectin/PEO matrix were fabricated using the electrospinning technique, which was never reported previously. Nitrogen-doped and nitrogen, sulfur-doped CDs were synthesized with average diameters of 2.74 nm and 2.17 nm using the one-step hydrothermal method, studied regarding their physicochemical, optical, and biocompatibility properties. The relative Quantum yields of N-CDs and N, S doped CDs were measured to be 54.7 % and 30.2 %, respectively. Nanocomposite fibers containing CDs were prepared, and their morphology, physicochemical properties, conductivity, drug release behavior, and cell viability were characterized. The results indicated that CDs improve fibrous scaffolds' tensile strength from 13.74 to 35.22 MPa while maintaining comparable extensibility. Furthermore, by incorporation of CDs in the prepared fibers conductivity enhanced from 8.69 × 10

There is a growing demand for biomaterials developing with novel properties for biomedical applications hence, hydrogels with 3D crosslinked polymeric structures obtained from natural polymers have been deeply inspected in this field. Pectin a unique biopolymer found in the cell walls of fruits and vegetables is extensively used in the pharmaceutical, food, and textile industries due to its ability to form a thick gel-like solution. Considering biocompatibility, biodegradability, easy gelling capability, and facile manipulation of pectin-based biomaterials; they have been thoroughly investigated for various potential biomedical applications including drug delivery, wound healing, tissue engineering, creation of implantable devices, and skin-care products.

This study aimed to compare the differences between oral administration and intravenous injection of polygalacturonic acid (PGA) in the regulation of immune and intestinal microflora in ulcerative colitis (UC) mice. PGA was administered orally or intravenously. PGA in the high-dose ig group was the most effective in treating UC by increasing colon length and downregulating disease activity index, histopathological score and proinflammatory cytokine levels. In spleen, the efficacy of PGA on restoring Th17/Treg balance in the high-dose iv group was better than that in the high-dose ig group, the opposite was observed in the lamina propria. The level of colonic IL-17A in the high-dose ig group was lower than that in the high-dose iv group, the opposite was observed for that of colonic IL-10. Western blot and immunohistochemistry analysis revealed that PGA in the high-dose ig group decreased the protein expression of RORγt, and increased that of FOXP3. Furthermore, PGA in the high-dose ig group was more effective than that in the high-dose iv group in improving the intestinal microflora structure. Our results suggest that in immune regulation, oral PGA is more effective in the lamina propria and gut microbiota while intravenous PGA is more effective in the spleen.

Silver nanoparticles (AgNPs) were widely used in the antibacterial field because of their excellent antibacterial properties. In this study, we used hesperidin and pectin as reductants and stabilizers, and prepared uniform and stable Hesperidin-Pectin AgNPs (HP-AgNPs) by a simple microwave-assisted process. Increasing the proportion of hesperidin, P-AgNPs, HP-AgNPs1, HP-AgNPs2 and H-AgNPs were obtained respectively. With the increase of hesperidin ratio, the mean particle size and zeta potential increased gradually. Fourier transform infrared spectroscopy (FTIR) analysis showed that Ag

"High-pressure processing (HPP) plus" combined technologies are applied to overcome the limitation of single HPP and to produce juices with more stable quality during storage. This research explored the potential of HPP in combination with centrifugation to produce cloud stable orange juice during refrigerated storage. The results indicated that HPP combined processing technology significantly improved the cloud stability of orange juice, which was related to removed large particles, reduced viscosity, decreased protein contents, and inactivated pectin methylesterase activity induced by centrifugation (P 0.05). Besides, chelator solubilized pectin (CSP) decreased but water solubilized pectin (WSP) maintained in the juice after centrifugation. During storage, the conversion of pectin fraction from WSP to CSP, resulting in sedimentation appeared in centrifugation treated orange juice when stored for 28 days. In general, pectin characteristics changes and pectin fractions conversion were the main driving forces affecting cloud stability of orange juice pasteurized by HPP in combination with centrifugation and during chilled storage.

In this study, a hot buffer soluble Houttuynia cordata polysaccharide (HBHP-3) with a molecular weight of 397.4 kDa was isolated from H. cordata. HBHP-3 was composed of rhamnose, arabinose, glucose, galactose and galacturonic acid with molar ratio of 16.0:12.6:4.6:18.1:15.6. Structural analysis showed that the main chain of HBHP-3 was composed of →2)-α-L-Rhap-(1→, →4)-α-D-GalpA-(1→ and →4)-β-D-Galp-(1→. There were branched chains of α-L-Araf-(1→, →5)-α-L-Araf-(1→, →4)-α-D-Glcp-(1→, →6)-β-D-Galp-(1→, β-D-Galp-(1→ connected to the O-4 positions of →2)-α-L-Rhap-(1→. HBHP-3 effectively inhibited the secretion of NO and the mRNA expression of pro-inflammatory cytokines in a dose-dependent manner in macrophages. HBHP-3 inhibited the phosphorylation of p65 and IκBα proteins as well, illustrating that HBHP-3 exerted its anti-inflammatory activity by inhibiting the activation of NF-κB pathway.

We aimed to assess the tolerance of fentanyl pectin nasal spray (FPNS) when used to treat procedural pain caused by wound dressing or physiotherapy in patients older than 75 years with or without opioid background treatment.This is a prospective monocentric, noncontrolled, nonrandomized study conducted from December 2014 to October 2017 in 2 geriatric wards (rehabilitation and acute medicine).Fifty-seven patients were included and 314 procedures were monitored.For each patient, 6 procedures were monitored: the first 2 without specific treatment, then fentanyl was started at 100 μg with a titration over a few procedures up to 800 μg in non-opioid-naïve patients and 400 μg in opioid-naïve. Sedation and respiratory scale were monitored during the procedures. All adverse drug events occurring from inclusion to 5 days after the intervention were collected and their imputability was assessed separately by 2 pharmacovigilance experts.Overall, 14.4% of the sessions with FPNS administration resulted in adverse drug events. Main adverse drug events were nausea and vomiting, somnolence, and confusion. Most of them were of mild to moderate severity. Four severe adverse events were due to accidental overdoses. No unexpected adverse event occurred. Tolerance was similar for opioid-naïve and non-opioid-naïve patients (P value = .93).FPNS was overall well tolerated in geriatric patients. Given its interesting pharmacokinetics, fentanyl is a promising lead for procedural pain treatment in geriatric patients, even those who are opioid naïve.

The anticancer activity of pectic polysaccharides (PPs) was proved by numerous studies, and which also indicated that the bioactivity of PPs was closely related to its complicated structures. Based on the summary and analysis about structure characteristics and corresponding enzymatic process of the reported PPs, the anticancer mechanism and related structural features were systematically clarified. It was found that not only the direct effects on the cancer cells by proliferation inhibition or apoptosis, but also the regulation of immune system, gut microbiota and gut metabolism as indirect effects, jointly played important roles in the anticancer of PPs. Nevertheless, during the study of PPs as promising anticancer components, the exact structure-function relationship, digestion process in vivo, and comprehensive action mechanism are still not well understanding. With the unveiling of the proposed issues, it is believed that PPs are promising to be exploited as effective cancer therapy/adjunctive therapy drugs or functional foods.

The addition of potato to wheat flour extends the nutritional values of bread. However, the adverse effects mediated by high dietary fiber in potato flour could affect the formation of gluten matrix. The water dynamics and distribution determined by the Low field nuclear magnetic resonance (LF-NMR) demonstrated a competitive water binding of dietary fiber, resulting in the partial dehydration and conformational changes of gluten protein complexes. Besides, the microstructure of the dough characterized by Scanning electron microscope (SEM) suggested that the insoluble cellulose could block the continuity of gluten from the spatial position, thereby negative affecting the mechanical properties of the dough. In our study, addition of cellulase and/or pectinase apparently mitigated the gluten aggregation and dehydration, contributing to the formation and the continuity of the three-dimensional gluten network. As a consequence, the specific volume of the bread was increased by 40.2%, and the hardness was reduced by 64.48%.

The plant cell wall is a flexible physical barrier surrounding the cell which functions in growth and differentiation, signaling, and response to environmental stimuli including the Earth gravity force. In the present study, structural and molecular modifications of cell wall components of cultured tobacco (Nicotiana tabacum cv. Burley 21) cells under alternative gravity conditions induced by 7 days exposure to 2-D clinostat have been investigated. In comparison with the control group, clinorotation significantly increased biomass but reduced the total amounts of wall and the contents of cellulose, pectin, uronic acidic, and xyloglucan. Gene expression of H

In this study, pectin (Pe) with different esterification degrees was used as raw materials to prepared hydrogel adsorbents via free radical polymerization. The effect of Pe esterification degree on hydrogel structure and adsorption performance was studied by FTIR, SEM and XPS characterization and copper ion adsorption experiment. The results demonstrated that the carboxyl group in the hydrogels was bonded to Cu

The covalent grafting of alkyl gallates onto pectin using a lipase-catalyzed reaction in a tetrahydrofuran/aqueous medium process acylated pectin molecules with excellent antioxidant and antibacterial properties. The alkyl gallates including methyl, ethyl, and propyl gallates were enzymatically grafted onto pectin molecule, in order to study the effect of alkyl gallates on the functional modification of pectin. The grafting mechanism was analyzed by ultraviolet-visible spectrum (UV-Vis), Fourier transform infrared spectrum (FTIR), proton nuclear magnetic resonance (

The unique physiochemical properties and the porous network architecture of hydrogel seek the attention to be explored in broad range of fields. In the last decade, numerous studies on the development of enzymatically cross-linked hydrogels have been elucidated. Implementing enzyme based cross-linking for fabrication of biomaterials over other cross-linking methods harbor various advantages, especially hydrogels designed using laccase exhibits mild reaction environment, high cross-linking efficiency and less toxicity. To our knowledge this is the first report reviewing the formulation of laccase mediated cross-linking for hydrogel preparation. Here, laccase catalyzed synthesis of hydrogel using polysaccharide viz. arabinoxylan, sugar beet pectin, galactomannan, chitosan etc. and proteins namely soy protein, gelatin, silk fibroin were discussed on highlighting their mechanical properties and its possible field of application. We have summarized the role of phenolic acids in laccase mediated cross-linking particularly ferulic acid which is a component of lignocellulose, serving cell rigidity via cross-linkage. The review also discusses on various biomedical applications such as controlled protein release, tissue engineering, and wound healing. It is anticipated that this review will give a detailed information on different laccase mediated reaction strategies that can be applied for the synthesis of various new biomaterials with tailor made properties.

In order to better utilize the citrus pectin (CP) resource, the crude citrus pectin (CCP), obtained from the citrus fruit canning processing waste water, was purified by cellulose DEAE-52 column, providing neutral polysaccharide CP0 and two acidic polysaccharides (CP1 and CP3). CP1 had the highest yield among the three fractions, being 44.29%. The chemical composition, structure and morphology of these pectin components were analyzed. Monosaccharide composition analysis revealed that arabinose was the most abundant composition in these pectin samples. CCP, CP1 and CP3 were mainly composed of rhamnogalacturonan-I (RG-I) regions. Compared with CP3, CCP and CP1 had longer side chains, which are mainly consisted of arabinose. FT-IR and NMR analysis indicated that α-type glycosidic bonds are the main linkage in the four pectin components. These CP samples were found to possess different conformation, but no triple-helical conformation was observed in all these CP fractions. Scanning electron microscopy revealed that CCP, CP1 and CP3 all had irregular sheet-like structures and partly porous structures. The four pectin components showed the characteristics of non-Newtonian fluids and possessed good viscoelasticity. Due to these properties, the pectin might have potential application in food industry as food thickening agent.

The objective of the study was to prepare active films based on pectin and polyphenol-rich extracts from Tommy Atkins mango peels. Aqueous and methanolic extracts showed a variety of phenolic compounds that were identified by UPLC-MS analysis, and a high content of total phenolics that were quantified by the Folin-Ciocalteau method. The methanolic extract showed better results in antioxidant tests and was more effective in inhibiting the growth of Gram-positive and Gram-negative bacteria. The pectin extracted from mango peels showed good thermal stability and a degree of methoxylation of 58.3% by 1H NMR. The films containing the phenolic extracts showed lower water vapor permeability when compared to the control film (without any phenolic extracts). The incorporation of the extracts led to an increase in elongation (e) and a decrease in tensile strength (σ) and modulus of elasticity (Y). The films with aqueous or methanolic extracts showed higher antioxidant activity in terms of inhibition of the DPPH radical. Therefore, the films developed in this work are presented as a promising alternative for food packaging and/or coating applications.

Biodegradable and eco-friendly adsorbents composed of natural carbohydrates have been used to replace carbon-based materials. This study presents a natural carbohydrate-based chitosan/pectin (CS/Pec) hydrogel adsorbent to remove Pb(II) from aqueous solutions. The physical CS/Pec hydrogel was prepared by blending aqueous CS and Pec solutions at 65 °C, preventing the use of toxic chemistries (crosslinking agents). The thermosensitive CS/Pec hydrogel was quickly created by cooling CS/Pec blend at room temperature. The used strategy created stable CS/Pec hydrogel against disintegration and water dissolution. The as-prepared hydrogel was characterized by infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The adsorbent had 1.688 mmol -COO− for each gram. These ionized sites bind Pb(II) ions, promoting their adsorption. The adsorption kinetic and equilibrium studies indicated that the Elovich and pseudo-second-order models adjusted well to the experimental data, respectively. The maximum removal capacities (qm) predicted by the Langmuir and Sips isotherms achieved 108.2 and 97.55 mg/g at 0.83 g/L adsorbent dosage (pH 4.0). The hydrogel/Pb(II) pair was characterized by scanning electron microscopy (SEM), X-ray dispersive energy (EDS), and differential scanning calorimetry (DSC). The chemisorption seems to play an essential role in the Pb(II) adsorption. Therefore, the adsorbent was not recovered, showing low potential for reusability.

The objective of the present investigation was to extract pectic polysaccharides from sesame seed hull and to determine their physicochemical and functional characteristics. The pectic polysaccharides in the seed hull were extracted with HCl and then collected at three ethanol concentrations of 30% (SSP30), 50% (SSP50), and 90% (SSP90). We found that SSP30 represented 75.6% of the total polysaccharides, and that it contained 76.39% galacturonic acid, with many HG domains and few short side chains in the RG-I domains. SSP30 exhibited the strongest hydroxyl radical scavenging activity among the three fractions, and was better able to stabilize the emulsions. Higher Mw pectic polysaccharides were firstly precipitated at lower ethanol concentrations, and the Mw of the precipitated pectic polysaccharides decreased with increasing ethanol concentration. These results provide important information on the structure and functional characteristics of sesame hull polysaccharides. This information can contribute to the future development of sesame hull polysaccharides for industrial purposes.

Rice starch has been used in various agri-food products due to its hypoallergenic properties. However, rice starch has poor solubility, lower resistant starch content with reduced retrogradation and poor functional properties. Hence, its industrial applications are rather limited. The lack of comprehensive information and a holistic understanding of the interaction between rice starch and endo/exogenous constituents to improve physico-chemical properties is a prerequisite in designing industrial products with enhanced functional attributes. In this comprehensive review, we highlight the potentials of physically mixing of biopolymers in upgrading the functional characteristics of rice starch as a raw material for industrial applications. Specifically, this review tackles rice starch modifications by adding natural/synthetic polymers and plasticizers, leading to functional blends or composites in developing sustainable packaging materials, pharma- and nutraceutical products. Moreover, a brief discussion on rice starch chemical and genetic modifications to alter starch quality for the deployment of rice starch industrial application is also highlighted.

Natural polymers are at the center of materials development for biomedical and biotechnological applications based on their biocompatibility, low-toxicity and biodegradability. In this study, a novel nanobiocomposite based on cross-linked pectin-cellulose hydrogel, silk fibroin, and Mg(OH)2 nanoparticles was designed and synthesized. After extensive physical-chemical characterization, the biological response of pectin-cellulose/silk fibroin/Mg(OH)2 nanobiocomposite scaffolds was evaluated by cell viability, red blood cells hemolytic and anti-biofilm assays. After 3 days and 7 days, the cell viability of this nanobiocomposite scaffold was 65.5% and 60.5% respectively. The hemolytic effect was below 20%. Furthermore, the presence of silk fibroin and Mg(OH)2 nanoparticles allowed to enhance the anti-biofilm activity, inhibiting the P. aeruginosa biofilm formation.

Chinese quince (Chaenomeles sinensis) fruits offer a potential source of pectin and hemicellulose. However, the existence of lignin-carbohydrate complexes (LCCs) can negatively impact the extraction of pectin and hemicellulose. In this work, LCCs were sequentially fractionated from Chinese quince during the removal of pectin and hemicellulose. The structures of LCCs were characterized by HPAEC, FT-IR, GPC, Py-GC/MS, TGA and 2D HSQC NMR. The results showed that the carbohydrate content and molecular weight of LCCs was found to be changed significantly after the removal of hemicellulose (KSH). The lignin in Björkman LCCs was found to be linked mainly to galactan and fructan, whereas the lignin LCC-AcOHs was found to be linked mainly to arabinan after the removal of KSH. The isolation of carbonate-soluble pectin (NSP) increased thermal stability of Björkman LCC fraction, however, the isolation of chelator-soluble pectin (CSP) increased the thermal stability of LCC-AcOHs. The S/G ratios of LCC-AcOHs increased and large amounts of S-type lignin released during sequential fractionation of pectin and hemicellulose. These results will be beneficial for understanding the mechanisms of pectin and hemicellulose isolation, thereby facilitating the potential application of Chinese quince as a valuable natural resource for food and other industries.

Cell wall signaling impacts plant growth and development, but how wall signals are perceived and transduced remains enigmatic. A new study shows that a rice wall-associated kinase, OsWAK11, senses pectin and alters growth by binding the OsBRI1 receptor. OsWAK11 inhibits OsBRI1 to slow growth and is degraded to speed up growth upon sensing pectin.

In this paper, a method for the enzymatic modification of pectin, in which gallic acid (GA) and propyl gallate (PG) were grafted onto pectin molecules in an aqueous/organic two-phase system catalyzed by lipase, was proposed. The potential reaction mechanism was explored through UV–Vis, FTIR and 1H NMR spectroscopic methods and density functional theory. Results suggested that the lipase played a dual role during the modification by catalyzing the hydrolysis of methyl ester bonds of pectin in the aqueous phase and the esterification between the 4-OH of GA and PG and the –COOH of pectin in the organic phase. Moreover, the effects of GA and PG on the antioxidant and the antibacterial activities of pectin were evaluated, and results showed that the antioxidant and the antibacterial activities of modified pectin were better than those of native pectin. The effect of modified pectin on the quality of fresh bass (Lateolabrax maculatus) was further studied. Results suggested that, compared to control group, the total viable count, histamine level, malondialdehyde content and acid value of bass fillets treated with modified pectin were significantly reduced, whereas the sensory score was significantly increased.

To reach the sustainable development goals on waste recycling, cacao pod husk (CPH), produced as an agricultural waste byproduct during the cacao bean processing was applied to manufacture CPH pectin for developing the potential for diverse application in aquaculture, minimizing CPH impact to the environment and bringing benefits to the agriculture and aquaculture industries. In this study, CPH pectin (5 g/kg diet) and Lactobacillus plantarum (LP; 1010 cfu/kg diet) were separately introduced to the diets of Litopenaeus vannamei for a 56-day feeding trial, and two synbiotic combinations of CPH pectin and LP (CPH pectin at 5 g/kg diet + LP at 107 cfu/kg diet or at 1010 cfu/kg diet) were also conducted. After the 56-day feeding trial, significantly elevated percent weight gain, percent length gains and feeding efficiency in L. vannamei were only observed in synbiotic combination of CPH pectin at 5 g/kg diet and LP at 107 cfu/kg diet treatment, and the remainder of the treatments remained consistently similar to the control. Significantly increases in total haemocyte count, granular cells, phenoloxidase activity, and respiratory bursts were observed in L. vannamei fed with synbiotics at 7–28 days of feeding, accompanied by significant promotion of phagocytic activity and clearance efficiency in response to V. alginolyticus challenge during 56 days of feeding trial. Furthermore, at the end of the 56 days of feeding trial, shrimp receiving CPH pectin and/or LP treatments showed a significantly higher survival ratio against V. alginolyticus infection and hypothermal stress. It was therefore concluded that CPH pectin or LP was confirmed as an immunostimulant for L. vannamei to trigger immunocompetence through oral administration without negative effects within 56 days of feeding trial, and the synbiotic combination of CPH pectin and LP exhibited complementary and synergistic effects on growth performance and immunocompetence in L. vannamei.

Pectin grafted polyacrylic copolymer hydrogels were made by free radical crosslink copolymerization of acrylic acid (AA) and acrylamide (AM) in an aqueous solution of pectin. N′N-methylene bis acrylamide (MBA) was used as a crosslinker. During the polymerization reaction the attapulgite (APG) filler was also incorporated in situ into the network of the copolymer gel. Several filled hydrogels were prepared by varying the amount of pectin and APG filler. These hydrogels were characterized by FTIR, 13C NMR, XRD, TGA, SEM, mechanical properties, DMA, swelling, diffusion characteristics and network parameters. The release kinetics of a model drug diltiazem hydrochloride (DT) was studied with these hydrogels. The wt% of pectin, APG and MBA was optimized with a central composite design (CCD) model of response surface methodology (RSM) with equilibrium swelling ratio (ESR), drug adsorption (mg/100 mg gel) and drug release% in 16 h as response. Accordingly, the hydrogel prepared with 5:1 AA:AM molar ratio, 25 wt% monomer concentration, 1% each of initiator and MBA concentration, 18 wt% pectin and 2 wt% APG showed an optimized ESR of 17.75, drug loading of 27.58 and a drug release % of 92.5 in 16 h at a solution pH of 7.4.

In this contribution, we report the fabrication of multifunctional nanoparticles with gold shell over an iron oxide nanoparticles (INPs) core. The fabricated system combines the magnetic property of INPs and the surface plasmon resonance of gold. The developed nanoparticles are coated with thiolated pectin (TPGINs), which provides stability to the nanoparticles dispersion and allows the loading of hydrophobic anticancer drugs. Curcumin (Cur) is used as the model drug and an encapsulation efficiency of approximately 80% in TPGINs is observed. Cytotoxicity study with HeLa cells shows that Cur-loaded TPGINs have better viability percent (~30%) than Cur alone (~40%) at a dose of 30 μg of TPGINs. Further, annexin V-PI assay demonstrated the enhanced anticancer activity of Cur-loaded TPGINs via induction of apoptosis. The use of TPGINs leads to a significant enhancement in generating reactive oxygen species (ROS) in HeLa cells through improved radiosensitization by gamma irradiation (0.5 Gy). TPGINs are further evaluated for imparting contrast in magnetic resonance imaging (MRI) with the r2 relaxivity in the range of 11.06–13.94 s−1 μg−1 mL when measured at 7 Tesla. These experimental results indicate the potential of TPGINs for drug delivery and MR imaging.

Apoplastic iron (Fe) in roots represents an essential Fe storage pool. Reallocation of apoplastic Fe is of great importance to plants experiencing Fe deprivation, but how this reallocation process is regulated remains elusive, likely because of the highly complex cell wall structure and the limited knowledge about cell wall biosynthesis and modulation. Here, we present genetic and biochemical evidence to demonstrate that the Cdi-mediated galactosylation of rhamnogalacturonan-II (RG-II) is required for apoplastic Fe reallocation. Cdi is expressed in roots and up-regulated in response to Fe deficiency. It encodes a putative glycosyltransferase localized to the Golgi apparatus. Biochemical and mass spectrometry assays showed that Cdi catalyzes the transfer of GDP-L-galactose to the terminus of side chain A on RG-II. Disruption of Cdi essentially decreased RG-II dimerization and hence disrupted cell wall formation, as well as the reallocation of apoplastic Fe from roots to shoots. Further transcriptomic, Fourier transform infrared spectroscopy, and Fe desorption kinetic analyses coincidently suggested that Cdi mediates apoplastic Fe reallocation through extensive modulation of cell wall components and consequently the Fe adsorption capacity of the cell wall. Our study provides direct evidence demonstrating a link between cell wall biosynthesis and apoplastic Fe reallocation, thus indicating that the structure of the cell wall is important for efficient usage of the cell wall Fe pool.

We report a new injectable and biodegradable self-healing hydrogel that shows enhanced anticancer drug release property. The hydrogel was prepared based on biodegradable pectin aldehyde (pectin-CHO) and acylhydrazide functionalized polymer poly(N-isopropylacrylamide-stat-acylhydrazide) P(NIPAM-stat-AH). Due to the dynamic nature of acylhydrazone bonds, the hydrogel exhibits self-healing behavior and its mechanical properties can be regulated by the weight ratio of P(NIPAM-stat-AH) to pectin-CHO. The in vitro and in vivo experiments show the hydrogel has not only good biocompatibility and biodegradability, but also decreases the toxicity of the drugs to living body and exhibits controlled drug release behavior as synergetic anti-tumor drug delivery carriers. The results demonstrate that the pectin-based self-healing hydrogels are injectable, biodegradable, and self-healable that is promising for localized anti-tumor therapy. STATEMENT OF SIGNIFICANCE: Injectable hydrogels with self-healing property and biodegradability are excellent candidates as drug loading and release carrier for biomedical applications. However the pectin as a biobased material is always neglected in self-healing hydrogel preparation. In this study, we fabricated biodegradable self-healing hydrogels from aldehyde group bearing pectin (pectin-CHO) and thermo-responsive copolymer of P(NIPAM-stat-AH). The hydrogel showed sustained drug release behavior, good biocompatibility and biodegradability both in vitro and in vivo. The in vivo experiment shows that the hydrogel with coloaded DOX and CA4 has synergetic therapy to CT26 tumors and this kind of biodegradable hydrogel has great potential application in antitumor therapy.

The elucidation of the structural characteristics of polysaccharides from natural sources is generally difficult owing to their structural complexity and heterogeneity. In our previous study, an immuno-stimulatory polysaccharide (RGP-AP-I) was isolated from Korean red ginseng (Panax ginseng C.A. Meyer). The present study aims to elucidate the structural characteristics of RGP-AP-I. Sequential enzyme hydrolysis was performed using four specific glycosylases, and chemical cleavage via β-elimination was carried out to determine the fine structure of RGP-AP-I. The degraded fragments were chemically identified using various chromatographic and spectrometric analyses, including HPLC-UVD, GC–MS, and tandem mass spectrometry. The results indicated that RGP-AP-I comprises a rhamnogalacturonan I (RG-I) backbone with repeating disaccharide units [→2)-Rhap-(1 → 4)-GalAp-(1→] and three side chains substituted at the C(O)4 position of the rhamnose residue in the backbone. The three side chains were identified as a highly branched α-(1 → 5)-arabinan, a branched β-(1 → 4)-galactan, and an arabino-β-3,6-galactan. Our results represent the first findings regarding the fine structure of the immuno-stimulatory polysaccharide RG-AP-I isolated from red ginseng.

Biomaterials for effective hemorrhage control are urgently needed in clinics as uncontrolled bleeding is associated with high mortality. Herein, we developed an injectable and in situ photo-crosslinkable hybrid hemostatic hydrogel by combining pectin methacrylate (PECMA) and gelatin methacryloyl (GelMA). This modular material system combines ionic- and photo-crosslinking chemistries to design interpenetrating networks (IPN) exhibiting tunable rheology, highly porous structure, and controllable swelling and mechanical properties. By simply changing the calcium (0–15 mM) and polymer (1.5–7%) content used for the sequential crosslinking of hydrogels via calcium gelation and UV-photopolymerization, it was possible to precisely modulate the injectability, degradation, and swelling ratio. Moreover, it is demonstrated that PECMA/GelMA hydrogels present good cytocompatibility and uniquely synergize the hemostatic properties of calcium ions on PECMA, the amine residues on GelMA, and the highly porous network toward rapid blood absorption and fast coagulation effect. An in vitro porcine skin bleeding model confirmed that the hydrogel could be directly injected into the wound and rapidly photo-crosslinked, circumventing the bleeding and decreasing the coagulation time by 39%. Importantly, the crosslinked hydrogel could be easily removed to prevent secondary wound injury. Overall, this injectable hybrid PECMA/GelMA hydrogel stands as a promising hemostatic material.

Natural macromolecules have attracted increasing attention due to their biocompatibility, low toxicity, and biodegradability. Pectin is one of the few polysaccharides with biomedical activity, consequently a candidate in biomedical and drug delivery Applications. Rhamnogalacturonan-II, a smaller component in pectin, plays a major role in biomedical activities. The ubiquitous presence of hydroxyl and carboxyl groups in pectin contribute to their hydrophilicity and, hence, to the favorable biocompatibility, low toxicity, and biodegradability. However, pure pectin-based materials present undesirable swelling and corrosion properties. The hydrophilic groups, via coordination, electrophilic addition, esterification, transesterification reactions, can contribute to pectin's physicochemical properties. Here the properties, extraction, and modification of pectin, which are fundamental to biomedical and drug delivery applications, are reviewed. Moreover, the synthesis, properties, and performance of pectin-based hybrid materials, composite materials, and emulsions are elaborated. The comprehensive review presented here can provide valuable information on pectin and its biomedical and drug delivery applications.

The aim of the present study was to investigate the effect of glycosylation with sugar beet pectin (SBP) on the interfacial behaviour and emulsifying ability of coconut protein (CP). The physical stabilities of the emulsions were predicted by transmission variation, droplet distribution and zeta potentials. The results showed that SBP-CP-stabilized emulsions showed better stability during centrifugation than those stabilized by CP because SBP-CP reduced the degree of variation in the CP transmission profile. The adsorption kinetics of all emulsifiers at the oil-water interface were determined to investigate the relationship between the interfacial behaviour and emulsion stability. The presence of SBP considerably reduced the adsorption rate of CP (0.698 mN/m/s1/2) and hampered the development of a highly viscoelastic network at the oil-water interface. The values of the dilatational elastic modulus (Ed = 19.477 mN/m) and dilatational viscous modulus (E = 19.719 mN/m) were approximately equal, indicating that the adsorption process was mainly dominated by elastic behaviour. Additionally, the SBP-CP interaction enhanced the dilatational property of the CP-absorbed layer.

The biological activity of neohesperidin (NH, a flavanone glycoside) is limited due to instability in the physiological environment. Thus, the current study aimed to explore the protective effect of NH-loaded pectin-chitosan decorated liposomes (P-CH-NH-NL) against palmitic acid (PA)-induced hepatic oxidative injury in L02 cells. The particles were characterized using DLS, TEM, HPLC, DSC, and cellular uptake study. Then, the protective effect of NH-loaded liposomal systems (NH-NLs) against PA-induced oxidative injury was evaluated in terms of cell viability study, intracellular ROS, superoxide ions (O2-), MMP, and cellular GSH determination. Our results exhibited that NH-NLs significantly lessened the PA-induced hepatic oxidative injury in L02 cells via decreasing ROS and O2- generation, reducing MMP collapse, and attenuating GSH reduction, whereas the free NH samples were ineffective. Furthermore, the coated NH-NLs were more effective than that of uncoated nanoliposome. Overall, our study confirmed that P-CH-NH-NL was capable of reducing PA-induced hepatic oxidative injury. Therefore, the pectin-chitosan decorated nanoliposome can be considered as an efficient delivery system for enhancing cellular uptake of lipophilic compound with controlled release and greater biological activity.

A series of nanocomposites made of high-density polyethylene (HDPE) and 10 wt% zinc oxide nanoparticles (ZnO NPs) were produced by extrusion and injection molding. The nanoparticles were prepared via a green way using the pectin-based banana peel extract as the stabilizer and a proper dispersion-providing agent. The fillers were well-dispersed in the matrix and the composites exhibited improved functional characteristics such as increased thermal stability and mechanical properties. The presence of the pectin-organophilized filler had a significant impact on the crystallization process of HDPE. The kinetics of the degradation process was also altered in comparison to the pure polymer. The fire properties of the composites were enhanced as the amount of the gas products produced during their degradation was reduced, what was confirmed by thermogravimetric analysis coupled with gas products analyses (TGA/FTIR/QMS). The structure and morphology of the materials were characterized by scanning electron microscope (SEM), infrared spectroscopy (FTIR), X-ray diffraction (XRD), and differential scanning calorimetry (DSC). Additionally, the mechanical properties were tested by tensile tests. An in-depth analysis revealed that the HDPE-pectin-ZnO interactions are crucial for the structural and performance properties of the final composite. The used biopolymer reacts with ZnO via ionic interaction and through hydrogen bond in the case of HDPE.

Food-grade Pickering high internal phase emulsions (HIPEs) stabilized by a mixture of β-cyclodextrin (β-CD) and sugar beet pectin (SBP) were fabricated for the first time. The factors affecting the microstructures, mechanical properties, and stabilities of the Pickering HIPEs were systematically investigated. The corresponding hybrid particles were also separated and characterized to reveal the formation mechanism. The results indicated that the mixture could induce the formation of HIPEs with an oil phase volume fraction (φ) of 75% using a one-step high-speed shearing process at room temperature. The composition (the mass ratio of β-CD to SBP, Rc/s) and concentration (W) of the mixture had significant effects on the formation and properties of HIPEs. When W ≥ 1.0% and Rc/s = 2:2 or 3:1, HIPEs had smaller oil droplets, higher gel strengths, better centrifugation stabilities and lutein protection effects. The spectral analysis suggested that SBP could adhere to the surface of β-CD particles to form hybrid particles during the homogenization. Compared with native β-CD particles, these hybrid particles had higher ζ-potential absolute values, and the SBP could also increase the viscosity of the aqueous phase, which contributed to the formation and properties of these HIPEs.

Due to the convenience, fresh-cut vegetables or fruits as the emerging commercial products have attracted much attention in recent years. However, the preservation of food with high quality remains a big challenge. In this study, one novel kind of edible composite film (PAX) consisted of pectin, sodium alginate (SA), and xanthan gum (XG) was well developed. The optimum concentrations for pectin and SA in PAX film based on the shearing viscosity were 6 g/L and 5 g/L, respectively. Upon this condition, the experimental results from the response surface methodology showed that the tensile strength for the optimized PAX (PAXO) film can reach the maximum value of 29.65 MPa at the concentration of 4 g/L XG, 18 g/L glycerol, and 20 g/L CaCl2. The corresponding elongation at break was 19.02% and the water vapor transmission rate was evaluated to be 18.12 × 10-11 g/(m2·s·pa). Furthermore, the nanocomposites in terms of coating or films were used to keep fresh-cut potatoes, where they exhibited different efficiencies in food preservation with the order: PAXO coating + CaCl2 ≈ PAXO coating > PAXO film > sterile water. All the results indicated that the as-prepared PAXO film or PAXO solution could be good candidates in packaging preservation.

Fil: Tarifa, María Clara. Universidad Nacional de Río Negro, CIT Río Negro. Río Negro, Argentina Fil: Piqueras, Cristian Martín. Planta Piloto de Ingeniería Química (UNS-CONICET). Departamento de Ingeniería Química (UNS). Buenos Aires, Argentina Fil: Genovese, Diego Bautista. Planta Piloto de Ingeniería Química (UNS-CONICET). Departamento de Ingeniería Química (UNS). Buenos Aires, Argentina. Fil: Brugnoni, Lorena Inés. Instituto de Ciencias Biológicas y Biomédicas del Sur (UNS-CONICET). Departamento de Biología, Bioquímica y Farmacia (UNS). Buenos Aires, Argentina The main objective of the research was to evaluate the performance of synbiotic delivery systems using pectin microgels on the protection of two probiotic strains (Lactobacillus casei ATCC 393 and Lactobacillus rhamnosus strain GG [ATCC 53103]) to simulated gastrointestinal digestion (GD) and storage conditions (4 ± 1 °C) in a 42 days trial. Microgel particles were prepared by ionotropic gelation method and three variables were evaluated: incubation time (24 and 48 h), free vs encapsulated cells, and presence or absence of prebiotic (commercial and Jerusalem artichoke inulin). Results demonstrated an encapsulation efficiency of 96±4% into particles with a mean diameter between 56 and 118 μm. The viability of encapsulated cells after 42 days storage stayed above 7 log units, being encapsulated cells in pectin-inulin microgels more resistant to GD compared to non-encapsulated cells or without prebiotics. In all cases incubation time influenced the strains' survival. El objetivo principal de la investigación fue evaluar el rendimiento de sistemas simbióticos utilizando microgeles de pectina para la protección de dos cepas probióticas (Lactobacillus casei ATCC 393 y Lactobacillus rhamnosus cepa GG [ATCC 53103]) frente a dos situaciones: simulación de condiciones de digestión gastrointestinal (DG) y bajo almacenamiento (4 ± 1 ° C) a lo largo de 42 días. Las partículas de microgel se prepararon mediante el método de gelificación ionotrópica y se evaluaron tres variables: tiempo de incubación (24 y 48 h), células libres vs encapsuladas y presencia o ausencia de prebióticos (inulina comercial e inulina de topinambur). Los resultados demostraron una eficiencia de encapsulación de los probióticas del 96 ± 4% en partículas con un diámetro medio entre 56 y 118 μm. La viabilidad de las células encapsuladas al termino de los 42 días de almacenamiento se mantuvo por encima de 7 unidades logarítmicas, siendo las células encapsuladas en los sistemas de microgeles pectina-inulina más resistentes a la DG en comparación con las células no encapsuladas o sin prebióticos. En todos los casos, el tiempo de incubación influyó en la supervivencia de las cepas.

The properties of pectin extracted from mandarin citrus peels by manosonication extraction (MSp) were systematically studied and compared with pectin obtained by the conventional maceration method (CMp). The yield of MSp (25.5%) was significantly higher than that of CMp (18.3%), while MSp exhibited two Mw fraction distributions. Monosaccharide analysis demonstrated that MSp had more branched RG-I regions (78.3 mol%) than CMp (36.6 mol%) with a high content of arabinose and galactose. The branched-chain morphological characteristics of samples were directly imaged by atomic force microscopy. MSp exhibited a significantly lower degree of methoxylation than CMp by FT-IR and NMR analysis, but X-ray diffraction analysis showed little difference in the level of crystallinity. Moreover, MSp and CMp showed non-Newtonian behaviour, and the increasing order of apparent viscosities was 1.0 w/v% MSp 1.0 w/v% CMp 2.0 w/v% CMp 2.0 w/v% MSp. Thermal analysis and weight loss measurements indicated MSp exhibited greater thermal stability. The results also indicated that both MSp and CMp significantly enhanced the emulsion activity at high concentrations; the emulsions containing 1.5 w/v% pectin showed no phase separation over 21 days, suggesting that MSp could be a potential effective stabiliser in the food and beverage industry.

International audience; Pectin, the major non-cellulosic component of primary cell wall can be degraded by polygalacturonases (PGs) and pectin methylesterases (PMEs) during pathogen attack on plants. We characterized two novel enzymes,VdPG2 and VdPME1, from the fungal plant pathogen Verticillium dahliae. VdPME1 was most active on citrus methylesterified pectin (55–70%) at pH 6 and a temperature of 40 °C, while VdPG2 was most active on polygalacturonic acid at pH 5 and a temperature of 50 °C. Using LC-MS/MS oligo profiling, and various pectins,the mode of action of VdPME1 and VdPG2 were determined. VdPME1 was shown to be processive, in accordance with the electrostatic potential of the enzyme. VdPG2 was identified asendo-PG releasing both methylesterified and non-methylesterified oligogalacturonides (OGs). Additionally, whenflax roots were used as substrate, acet-ylated OGs were detected. The comparisons of OGs released from Verticillium-susceptible and partially resistant flax cultivars identified new possible elicitor of plant defence responses.

The preparation, chemical properties and bio-activities of polysaccharides derived from halophytes have gained an increasing interest in the past few years. Phytochemical and pharmacological reports have shown that carbohydrates are important biologically active compounds of halophytes with numerous biological potentials. It is believed that the mechanisms involved in these bio-activities are due to the modulation of immune system. The main objective of this summary is to appraise available literature of a comparative study on the extraction, structural characterizations and biological potentials, particularly immunomodulatory effects, of carbohydrates isolated from halophytes (10 families). This review also attempts to discuss on bioactivities of polysaccharides related with their structure-activity relationship. Data indicated that the highest polysaccharides yield of around 35% was obtained under microwave irradiation. Structurally, results revealed that the most of extracted carbohydrates are pectic polysaccharides which mainly composed of arabinose (from 0.9 to 72%), accompanied by other monosaccharides (galactose, glucose, rhamnose, mannose and xylose), significant amounts of uronic acids (from 18.9 to 90.1%) and some proportions of fucose (from 0.2 to 8.3%). The molecular mass of these pectic polysaccharides was varied from 10 to 2650 kDa. Hence, the evaluation of these polysaccharides offers a great opportunity to discover novel therapeutic agents that presented especially beneficial immunomodulatory properties. Moreover, reports indicated that uronic acids, molecular weights, as well as the presence of sulfate and unmethylated acidic groups may play a significant role in biological activities of carbohydrates from halophyte species.

Coffee pulp is one of the major underutilized byproduct of coffee processing in farm level. Disposal of this agro-industrial waste has become one of the most challenging tasks for coffee planters. However, most of the efforts are towards the management of coffee pulp as an effluent, and not-on re-use. The problem is compounded due to the large volumes produced in diluted forms, which makes it expensive to reuse. The preliminary proximate analysis of coffee pulp indicated it to be rich in pectin and polyphenols. The efficacy of various chemicals like ethanol, sulfuric acid, hydrochloric acid, nitric acid, ammonium oxalate and metal salts for effective precipitation of pectin from coffee pulp was evaluated. HPLC characterization of the extracted and concentrated polyphenols fractions was analyzed. The maximum extraction of pectin was achieved by using metal salts and ethanol with 6.0% and 6.7% on wet weight basis respectively. The equivalent weight of extracted pectin (1180.5 mg/g) was found to be higher than that of commercial pectin (724.8 mg/g). The methoxyl content of the commercial pectin and crude pectin were 9.3 and 5.6% respectively. Gallic, vanillin, catechin, ethyl catechol, coumaric, Caffeic, and ferulic acid were the major polyphenols as quantified by the HPLC. The polyphenol fraction showed a good antioxidant activity with phosphomolybdate, FRAP, DPPH, and ABTS radicals respectively. The sustainable utilization of coffee pulp as a source of pectin and polyphenols with good antioxidant activities could help to solve the problem of waste generated in coffee processing in farm level.