Search

Drying is a universal method applied for food preservation. To date, several models have been developed to evaluate drying kinetics. In this study, lychee was dried employing a hot air dryer, and the drying kinetics was evaluated by comparing the Newtonian model, Henderson and Pabis model, Page model, and Logarithmic model. However, temperature and relative humidity, the key driving forces for drying kinetics, are not considered by these models. Thus, an integrated drying model, as a function of temperature and relative humidity, was developed to predict the hot air-drying kinetics and mass transfer phenomena of lychee followed by the calibration and validation of the model with independent experimental datasets. The model validation consisted of Nash- Sutcliffe model coefficient ( E ), coefficient of determination ( R 2 ) and index of agreement ( d ) and all of them were found close to 1 indicating perfect model fit. Besides, the developed model was applied for process optimization and scenario analysis. The drying rate constant was found as a function of temperature and relative humidity that was high at high temperature and low relative humidity. Interestingly, temperature showed a higher effect on the drying rate constant compared to relative humidity. Overall, the present study will open a new window to developing further drying model of lychee to optimize quality its quality parameters., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)

An improved mutual coupling compensation in circularly polarized (CP) multi-input multi-output (MIMO) dielectric resonator antenna (DRA) is presented in this paper. Using trimming approach, the mutual coupling (MC) between closely spaced DRA units at 0.3λ has been significantly reduced while axial ratio performance has been maintained. Mutual coupling reduction is obtained by trimming the DRA to ensure low mutual coupling below -20dB. The exclusive features of the proposed MIMO DRA include wide impedance matching bandwidth (BW), triple band circular polarization, and suppressed MC between the radiating elements. The impedance bandwidth matches perfectly with a triple band's 3 dB axial ratio (AR). It is designed with characteristic mode analysis with good agreement of the measurement that has been obtained. Using the probe feed method, the DRA and patch strip are coupled together to allow bandwidth widening of the pro-posed DRA. An impedance bandwidth of 34% at a lower frequency to around 2% at a higher frequency was achieved in all resonance frequencies. Thus, we refer to our newly designed DRA as a proposed method for effectively reducing the mutual coupling between DRAs. Additionally, the 3 dB AR bandwidth matched at 3.3 GHz, 4.6 GHz, and 6.3 GHz with a percentage of 11.66%, 3.04%, and 2.22% obtained at the three different frequencies. Note that the proposed DRA exhibits low mutual coupling (below -20 dB) at the targeted frequencies, which is suitable for better signal reception for MIMO applications. By computing, the metrics envelop correlation coefficient, diversity gain, channel capacity loss, and total active reflection coefficient, the MIMO performance of the proposed antenna is verified. The experiments show a close result between simulated and computed validation of the proposed DRA., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)