Search

Genetic markers can represent a valuable tool for forensic purposes in discriminating between fiber-type and drug-type cannabis. The aim of this research was to evaluate developed genetic markers for tetrahydrocannabinolic acid synthase (THCAS) when applied on certified hemp (14 varieties) and forensic casework samples of four chemotypes (40 seizures). Chemotype-associated PCR-based markers did not enable reliable selective amplification despite the difference in cannabinoid composition. In order to characterize forensic samples of unknown origin, THCAS sequencing was performed. The comparison of THCAS sequences, including additional accessions, indicated high genetic similarity of hemp varieties. Confiscated samples of intermediate, THC, CBD and CBG type were clearly separated from fiber-type accessions and assigned to drug-type cluster. Despite the unknown origin, their position on the tree support the notion that they are more related to drug-type accessions than to the fiber-type. However, no clear distinction between chemotypes was found. Furthermore, 26 amino acid substitutions were revealed in THCAS that clearly separate hemp varieties and neither of them cluster with any other tested sample., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

As the frequency of cannabis-based therapy increases, the ability to distinguish intake of cannabis-based medicines from recreational cannabis use becomes desirable. Minor cannabinoids have been suggested to indicate recreational cannabis use in biological matrices but are unreliable when presumably also present in directly plantderived medicines. Thus, for therapeutics such as medical cannabis, Sativex® and Dronabinol, a more thorough investigation of cannabinoid profiles is required to identify possible distinguishing markers. In this study, 16 phytocannabinoids were quantified in samples of seized and medical cannabis, Sativex® and Dronabinol from two different manufacturers, using a validated LC-MS/MS method. Analytes included delta-9- tetrahydrocannabinol, tetrahydocannabinolic acid A, cannabidiol, cannabidiolic acid, cannabigerol, cannabigerolic acid, cannabinol, cannabinolic acid, cannabichromene, cannabichromenic acid, cannabicyclol, cannabicyclolic acid, tetrahydrocannabivarin, tetrahydrocannabivarinic acid, cannabidivarin and cannabidivarinic acid. Resultant cannabinoid profiles were compared, and markers were suggested. Characteristics of Sativex® included a specific cannabidiol/tetrahydrocannabinol ratio and presence of cannabichromene, while acidic cannabinoids, cannabigerol and cannabinol occurred in only low amounts. As expected, the predominant ingredient in Dronabinol was tetrahydrocannabinol, but minor cannabinoids were quantified as well. Medical marihuana and seized cannabis were compared separately in a principal component analysis. Several medical marihuana varieties were found to significantly differ from seized cannabis, mostly regarding contents of tetrahydocannabinolic acid A and tetrahydrocannabivarinic acid and cannabidiolic and cannabidivarinic acid respectively., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Cannabidiol (CBD) rich hemp and hemp products low in Δ 9 -tetrahydrocannabinol (THC) (less than 1%) are legally available in Switzerland. Besides herbs for smoking and oils, liquids (e-liquids) for smoking in electronic cigarettes (e-cigs) have recently appeared on the market. These e-liquids are available with different CBD concentrations and can be flavoured. The aim of the current study was to investigate 20 e-liquids legally available in Switzerland for their contents using Fourier-transform infrared spectroscopy (FTIR) as a preliminary step followed by gas-chromatography coupled to mass spectrometry to identify potential cannabinoids, natural plant compounds and flavours. Quantification of CBD, cannabidiol carboxylic acid (CBD-acid), cannabinol (CBN), Δ 9 -tetrahydrocannabinol (THC), and Δ 9 -tetrahydrocannabinol carboxylic acid A (THC-acid) was performed by a validated method with ultra-high-pressure-liquid chromatography coupled to a diode array detector (UHPLC-DAD). FTIR analysis could confirm that for all investigated samples the e-liquid matrix consisted of 1,2-propanediol and glycerol. The qualitative GC-MS could identify ten phytocannabinoids including the quantified analytes, six natural plant compounds and five flavours. All analysed samples had a total THC content below 0.1059% (by weight), hence meeting the legal requirements of both Switzerland (<1%) and the European Union (<0.2%). The total CBD content ranged from 0.182 to 3.346% and differed in ten out of 20 samples from the CBD content presented by the manufacturer by more than 10% relative CBD. Furthermore, two of the analysed samples contained only 0.348% and 0.182% total CBD despite being labelled as "CBD rich". Seven of the 20 samples contained the correct CBD content (in the range of the labelled CBD content ± 10%). In conclusion, a deviation in the determined total CBD content from the labelled CBD content could be observed for half of the analysed samples, meaning that consumers cannot rely on the manufacturers' information. It is remarkable, that currently no official regulations for providing correct information of CBD content or any external product control is available in Switzerland and in most other countries., Competing Interests: Declaration of Competing Interest The authors declare no conflict of interest., (Copyright © 2020 Elsevier B.V. All rights reserved.)

This study focuses on the chemical route sourcing of illicitly produced Δ9-Tetrahydrocannabinol (Δ9-THC) via the acid-catalyzed cannabidiol isomerization reaction. Each of the acid-catalyzed reactions used acids that are readily available for the general population such as battery acid, muriatic acid, and vinegar. After the acid-catalyzed isomerization was complete, an analysis using Liquid Chromatography-coupled-Mass Spectrometry (LC-MS)-coupled-ion mobility to confirm all synthetic impurities in the sample was conducted. The conducted chemical route sourcing allows law enforcement to be able to determine how CBD was converted to psychoactive cannabinoids. Specifically, 10-methoxy-THC, 11-hydroxy-THC, 11,5″-dihydroxy-Δ9-THC, and 5″-hydroxy-CBD were able to be used as indicators in the determination of the chemical route sourcing. Additionally, the ion mobility allowed for a rapid secondary separation of the psychoactive cannabinoids without the need for the long LC/MS analysis time., (Copyright © 2020. Published by Elsevier B.V.)

The recent surge in the sale of cannabis-based consumer products in the US includes foods, candies, beverages, topicals, vapes/eliquids, oral supplements in various forms, recreational marijuana plants, and plant extracts or preparations. The wide variety of product and sample types has resulted in a host of new matrix interferences when conducting qualitative testing for the cannabis cannabinoids such as cannabidiol and d9-tetrahydrocannabinol. A qualitative GC-MS method is presented in this work, which uses a commercial 35% silphenylene phase to provide chromatographic resolution for 11 target cannabinoids as their trimethylsilyl derivatives (CBD, CBDA, d9THC, THCA, CBN, d8THC, CBG, CBGA, CBDV, THCV, and CBC). The method uses variants of ethanol- and acetonitrile-based extractants to successfully minimize or eliminate several types of interferents, and also provides protocols to address specific interferents such as glycerin and lactose. Method validation included spike/recovery for five cannabinoids of primary interest (spiking level 50μg/g) from a series of edible oils, foods, beverages, candies, topicals, oral OTC pharmaceuticals, glycerin, and propylene glycol. The minimum detectable concentration was established as 1.0μg/g. The method was applied to about sixty diverse commercial products, as well as to recreational marijuana plants, plant preparations, hempseed oils, and dronabinol capsules., (Published by Elsevier B.V.)

Quantitative analysis for the cannabis cannabinoids such as cannabidiol and Δ 9 -tetrahydrocannabinol in commercial products is necessary for evaluating label information, and assessing dosages and exposures when the products are consumed. Herein is presented a broadly applicable HPLC-DAD method for the determination of cannabis cannabinoids in commercial consumer products and traditional plant-related substances. The current method provides chromatographic resolution of 11 cannabinoids using a commercial, mixed C18-aromatic functionality stationary phase. The method uses 95% or pure ethanol for extraction, and certain modifications which address specific matrix types are detailed herein. Extensive method validation including precision and accuracy was conducted for five cannabinoids of primary interest (CBD, Δ 9 -THC, CBDA, THCA, and CBN). UV detection provided excellent sensitivity with limits of quantitation (LOQs) of 10μg/g across cannabinoids. The method was applied to about 60 commercial products representing diverse product types and a broad range of cannabinoids amounts (0.01-350mg/g)., (Published by Elsevier B.V.)

New designer drugs such as K2, Spice, and "bath salts" present a formidable challenge for law enforcement and public health officials. The following report summarizes a three-year study of 1320 law enforcement cases involving over 3000 products described as vegetable material, powders, capsules, tablets, blotter paper, or drug paraphernalia. All items were seized in Arkansas from January 2010 through December 2012 and submitted to the Arkansas State Crime Laboratory for analysis. The geographical distribution of these seizures co-localized in areas with higher population, colleges, and universities. Validated forensic testing procedures confirmed the presence of 26 synthetic cannabinoids, 12 designer stimulants, and 5 hallucinogenic-like drugs regulated by the Synthetic Drug Prevention Act of 2012 and other state statutes. Analysis of paraphernalia suggests that these drugs are commonly used concomitantly with other drugs of abuse including marijuana, MDMA, and methamphetamine. Exact designer drug compositions were unpredictable and often formulated with multiple agents, but overall, the synthetic cannabinoids were significantly more prevalent than all the other designer drugs detected. The synthetic cannabinoids JWH-018, AM2201, JWH-122, JWH-210, and XLR11 were most commonly detected in green vegetable material and powder products. The designer stimulants methylenedioxypyrovalerone (MDPV), 3,4-methylenedioxy-N-methylcathinone (methylone), and α-methylamino-valerophenone (pentedrone) were commonly detected in tablets, capsules, and powders. Hallucinogenic drugs were rarely detected, but generally found on blotter paper products. Emerging designer drug products remain a significant problem and continued surveillance is needed to protect public health., (Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.)

Introduction: Postmortem redistribution (PMR), a well-described phenomenon in forensic toxicology for certain drugs, can result in increased central blood concentrations relative to peripheral blood concentrations. Δ(9)-tetrahydrocannabinol (THC), the primary psychoactive component in cannabis or marijuana, is the illicit substance most commonly implicated in driving under the influence of drugs (DUID) cases and fatally-injured drivers. No investigation of PMR of THC in human blood has been reported to date., Methods: Matched heart and iliac postmortem blood specimens were collected from 19 medical examiner cases (16 Males, 3 Females) with positive cannabinoid urine immunoassay screens. THC, its equipotent metabolite 11-hydroxy-THC (11-OH-THC) and non-psychoactive metabolite 11-nor-9-carboxy-THC (THCCOOH) were quantified by two-dimensional gas chromatography-mass spectrometry with cryofocusing, with 0.5 ng/mL limits of quantification (LOQ) for all analytes., Results: 10 cases had quantifiable THC and 11-OH-THC; THCCOOH was present in all 19. Median (range) heart:iliac blood ratios were 1.5 for THC (range: 0.3-3.1); 1.6 for 11-OH-THC (range: 0.3-2.7); and 1.8 for THCCOOH (range: 0.5-3.0)., Discussion: Cannabinoids, in general, exhibited a mean and median central:peripheral (C:P) concentration ratio of less than 2 following death. A trend was observed for greater PMR with increasing postmortem interval between death and sampling. To our knowledge, these are the first data on THC PMR in humans, providing important scientific data to aid in the interpretation of postmortem cannabinoid concentrations in medico-legal investigations., (Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.)

The cannabinoid content of 13 different strains of cannabis plant (Cannabis sativa L.) was analyzed. Six strains fell into the "drug-type" class, with high Delta-9-tetrahydrocannabinolic acid (THCA) content, and seven strains into the "fiber-type" class, with low THCA using HPLC analysis. Genomic DNA sequence polymorphisms in the THCA synthase gene from each strain were studied. A single PCR fragment of the THCA synthase gene was detected from six strains of "drug-type" plants. We could also detect the fragment from seven strains of "fiber-type" plants, although no or very low content of THCA were detected in these samples. These were 1638 bp from all 13 strains and no intron among the sequences obtained. There were two variants of the THCA synthase gene in the "drug-type" and "fiber-type" cannabis plants, respectively. Thirty-seven major substitutions were detected in the alignment of the deduced amino acid sequences from these variants. Furthermore, we identified a specific PCR marker for the THCA synthase gene for the "drug-type" strains. This PCR marker was not detected in the "fiber-type" strains.

Bundles of paper, similar to sterling banknotes, were counted in banks in England and Wales. Subsequent analysis showed that the counting process, both by machine and by hand, transferred nanogram amounts of cocaine to the paper. Crystalline material, similar to cocaine hydrochloride, could be observed on the surface of the paper following counting. The geographical distribution of contamination broadly followed Government statistics for cocaine usage within the UK. Diacetylmorphine, Delta(9)-tetrahydrocannabinol (THC) and 3,4-methylenedioxymethylamphetamine (MDMA) were not detected during this study.

An unknown red substance was being sold and used with other drugs of abuse in Virginia (often being used in conjunction with marihuana). The red substance was identified as Dragon's Blood incense from Daemonorops draco. In bioassays, Dragon's Blood incense exhibited a low, but measurable cytotoxicity in in vitro cell lines. Dragon's Blood incense or Volatilized Dragon's Blood had no adverse effect on mouse motor performance based on the inclined screen and rotorod tests. delta(9)-Tetrahydrocannibinol (THC) produced a dose-related decline in mouse performance on the rotorod test. The combination of Dragon's Blood incense or Volatilized Dragon's Blood with delta(9)-THC did not contribute further to the impairment of the mice on the rotorod. This data suggests that the abuse potential for Dragon's Blood incense alone or in combination with marihuana is minimal.

The cross-reaction of anti-delta 1-THCA MAb against other cannabinoids was very wide. However, other naturally occurring and synthetic phenolics including opium alkaloids did not react to the MAb. Using this ELISA, this paper reports application of the competitive ELISA for detection of marijuana samples. The ELISA described here was very sensitive to the ether extracts of marijuana samples when compared to those of other plants. The assay provided a sensitive method useful for the judge of marijuana samples.

The accuracy of a quantitative analysis is highly dependent on the quality of the reference standard. Although reference standards are more and more supplied with a certificate, laboratories may feel the need for additional acceptance testing. In general, confirmation of the purity of many solid reference substances can be obtained by a number of simple tests. However, verification of the true content of reference solutions may be complicated. A number of problems with the THC quantitation caused our interest for a verification method for the THC reference solution. The quantitation of THC is performed by gas chromatography with flame ionisation detector. The effective carbon number concept was used to predict GC/FID response factors. Equations and data are presented to calculate theoretical response ratios of cannabinoids. The experimental data for CBD and CBN were in excellent agreement with the theoretical ones. The paper shows that the response factors of CBD and/or CBN can be used for the calculation of the THC content of either reference solutions or cannabis samples.