Search

An eight-year field trial was conducted to investigate the effects of four different N fertilization treatments of urea (CO(NH 2 ) 2 , the control), ammonium sulfate ((NH 4 ) 2 SO 4 ), ammonium chloride (NH 4 Cl), and ammonium hydrogen phosphate [(NH 4 ) 2 HPO 4 ]) on cadmium (Cd) phytotoxicity in rice and soil microbial communities in a Cd-contaminated paddy of southern China. The results demonstrate that the different N treatments exerted different effects: the application of (NH 4 ) 2 HPO 4 and (NH 4 ) 2 SO 4 significantly increased rice grain yield and decreased soil-extractable Cd content when compared with those of the control, while NH 4 Cl had a converse effect. Expression of genes related to Cd uptake (IRT and NRAPM genes) and transport (HMA genes) by roots may be responsible for Cd phytotoxicity in rice grown in the different N fertilization treatments. Our results further demonstrate that N fertilization had stronger effects on soil bacterial communities than fungal communities. The bacterial and fungal keystone species were identified by phylogenetic molecular ecological network (pMEN) analysis and mainly fell into the categories of Gammaproteobacteria, Acidobacteria and Actinobacteria for the bacterial species and Ascomycota for the fungal species; all of these keystone species were highly enriched in the (NH 4 ) 2 HPO 4 treatment. Soil pH and soil available-Cd content emerged as the major determinants of microbial network connectors. These results could provide effective fertilizing strategies for alleviating Cd phytotoxicity in rice and enhance the understanding of its underlying microbial mechanisms., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

A large amount of chloride and ammonium ions were produced and released from industrial processes with non-biodegradable organic pollutants to affect efficiencies of advanced oxidation processes (AOPs). Here, the influences of chloride and ammonium ions on Co/peroxymonosulfate (Co/PMS) reaction system, a widely used AOPs to produce sulfate radicals, were investigated by examining the degradation efficiency of an azo dye (Acid Orange 7, AO7). The experimental results showed that a significant decrease in the degradation rate of AO7 was observed in the presence of NH 4 + , while a dual effect of chloride on AO7 bleaching appeared. The presence of NH 4 Cl was unfavorable for AO7 degradation at low concentration (<20 mM), whereas further addition of NH 4 Cl (>20 mM) apparently accelerated AO7 discoloration rate. The apparent effects of the two co-existing inorganic ions were determined by roles of the dominating ions at varied molar ratio of [NH 4 + ]/[Cl - ]. The present study may have technical implications for the treatment of industrial wastewater containing diverse ions in practice., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Flocculation as the core technology of sludge pretreatment can improve the dewatering performance of sludge that enables to reduce the cost of sludge transportation and the subsequent disposal costs. Therefore, synthesis of high-efficiency and economic flocculant is remarkably desired in this field. This study presents a cationic polyacrylamide (CPAM) flocculant with microblock structure synthesized through ultraviolet (UV)-initiated template copolymerization by using acrylamide (AM) and methacrylamido propyl trimethyl ammonium chloride (MAPTAC) as monomers, sodium polyacrylate (PAAS) as template, and 2,2'-azobis [2-(2-imidazolin-2-yl) propane] dihydrochloride (VA-044) as photoinitiator. The microblock structure of the CPAM was observed through nuclear magnetic resonance ( 1 H NMR and 13 C NMR) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM) analyses. Furthermore, thermogravimetric/differential scanning calorimetry (TG/DSC) analysis was used to evaluate its thermal decomposition property. The copolymerization mechanism was investigated through the determination of the binding constant M K and study on polymerization kinetics. Results showed that the copolymerization was conducted in accordance with the I (ZIP) template polymerization mechanism, and revealed the coexistence of bimolecular termination free-radical reaction and mono-radical termination in the polymerization process. Results of sludge dewatering tests indicated the superior flocculation performance of microblock flocculant than random distributed CPAM. The residual turbidity, filter cake moisture content, and specific resistance to filtration reached 9.37 NTU, 68.01%, and 6.24 (10 12  m kg -1 ), respectively, at 40 mg L -1 of template poly(AM-MAPTAC) and pH 6.0. Furthermore, all flocculant except commercial CPAM showed a wide scope of pH application., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Biofilters degrade a small fraction of the natural organic matter (NOM) contained in seawater which is the leading cause of biofouling in downstream processes. This work studies the effects of chemical additions on NOM biodegradation by biofilters. In this work, biofiltration of seawater with an empty bed contact time (EBCT) of 6 min and a hydraulic loading rate of 10 mh(-1) reduces the biological oxygen demand (BOD7) by 8%, the dissolved organic carbon (DOC) by 6% and the UV absorbance at 254 nm (A₂₅₄) by 7%. Different amounts of ammonium chloride are added to the seawater (up to twice the total dissolved nitrogen in untreated seawater) to study its possible effect on the removal of NOM by a pilot-scale biofilter. Seawater is amended with different amounts of easily biodegradable dissolved organic carbon (BDOC) supplied as sodium acetate (up to twice the DOC) for the same purpose. The results of this work reveal that the ammonium chloride additions do not significantly affect NOM removal and the sodium acetate is completely consumed by the biofiltration process. For both types of chemical additions, the BOD₇, DOC and A₂₅₄ in the outlet stream of the biofilter are similar to the values for the untreated control. These results indicate that this biofilter easily removes the BDOC from the seawater when the EBCT is not above 6 min. Furthermore, nitrogen does not limit the NOM biodegradation in seawater under these experimental conditions., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

The selective non-catalytic reduction (SNCR) process is one of the methods used to reduce NO(x) to N(2) and H(2)O by injecting NH(3) or urea solution into a high-temperature furnace. Merits of this method include simple handling, low cost, and energy savings. However, a critical problem of the SNCR process is the generation of ammonia slip; in reactions with HCl in flue gas, ammonium chloride is generated and forms detached white plumes near the stack. Using a laboratory-scale experimental apparatus, we examined the possibility of NH(4)Cl collection and removal by a bag filter (BF). The molar NH(3)/HCl ratio of the compound collected at the filter was nearly one, regardless of gas temperature, retention time, and concentration, confirming the formation of NH(4)Cl. The NH(4)Cl generation ratio increased as reaction temperature decreased, indicating that the collection efficiency of NH(4)Cl should increase if the BF is operated at the lowest possible temperature while avoiding the critical point causing low-temperature corrosion (e.g., 150 degrees C). In addition, the use of activated carbon injection in the front of the BF and the dust layer on the BF are expected to capture slipped ammonia at the BF and reduce NH(4)Cl fume generation in the stack.

Polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/DF) levels in plywood combustion gas were investigated for the effects of ammonium chloride (NH4Cl) and paint. For combustion systems in which neither NH4Cl nor paint were present in the plywood samples, total amounts of PCDD/DFs in the combustion gas were in the order of 35-529 ng/Nm3, and were higher in the systems with softwood trees than broadleaf ones, depending on the Cl concentrations. For the systems with added NH4Cl and no paint, and those without NH4Cl but were painted, higher PCDD/ DF rates were observed at combustion temperatures of 270 degrees C and 500 degrees C, respectively. However, for the systems with both NH4Cl and paint, their amounts in the range of 0.6-13 ng/Nm3 were the lowest in all systems. The PCDD/DF abundance profiles were similar to their patterns in pentachlorophenol (PCP). Furthermore, it was found that the 2,3,7,8-chlorine substituted penta- and hexa-CDDs contributed more than other 2,3,7,8-chlorine substitutes to toxicity equivalency (TEQ).

5-Chloromethyl-1-methyl-2-nitroimidazole reacted efficiently with the anion derived from 5-bromoisoquinolin-1-one to give 5-bromo-2-((1-methyl-2-nitroimidazol-5-yl)methyl)isoquinolin -1-one. Biomimetic reduction effected release of the 5-bromoisoquinolin-1-one. The 2-nitroimidazol-5-ylmethyl unit thus has potential for development as a general prodrug system for selective drug delivery to hypoxic tissues.