Search

Anaerobic ammonium oxidation (anammox) is a low-carbon biological nitrogen removal process, that has been widely applied to treat high-strength wastewater. However, the practical application of mainstream anammox treatment is limited due to the slow growth rate of anammox bacteria (AnAOB). Therefore, it is important to provide a comprehensive summary of the potential impacts and regulatory strategies for system stability. This article systematically reviewed the effects of environmental fluctuations on anammox systems, summarizing the bacterial metabolisms and the relationship between metabolite and microbial functional effects. To address the shortcoming of mainstream anammox process, molecular strategies based on quorum sensing (QS) were proposed. Sludge granulation, gel encapsulation and carrier-based biofilm technologies were adopted to enhance the QS function in microbial aggregation and reduction of biomass loss. Furthermore, this article discussed the application and progress of anammox-coupled processes. Valuable insights were provided for the stable operation and development of mainstream anammox process from the perspectives of QS and microbial metabolism., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

As a key component of extracellular polymeric substances (EPS), extracellular deoxyribonucleic acid (eDNA) acts as a bridge in maintaining the structural stability of granular sludge. However, its ability of carrying antibiotic resistance genes (ARGs) promotes the gene horizontal transfer, raising a high risk for human health. In this study, a series of batch tests were performed to elucidate the response of anammox granular sludge (AnGS) with different sizes (S-AnGS with diameters lower than 0.9 mm and L-AnGS with diameters of 0.9-2 mm) to the removal of eDNA and corresponding mechanism. The results showed that the highest bioactivity of S-AnGS and L-AnGS was achieved by adding DNase I, and the absolute abundance of hzsA in the systems also increased. The dominant microorganism in each sludge was Candidatus Kuenenia, which maintained a higher relative abundance of 24% in S-AnGS. Settling experiments demonstrated that the permeability of AnGS was positively correlated with the addition of DNase I. The permeability index of granular sludge, Г, rose by 58.54% in S-AnGS and 11.79% in L-AnGS. The absence of eDNA is conducive to the increase in the permeability and porosity of AnGS. Similarity in the functional genes and microbial communities of intracellular and extracellular DNA implied the occurrence of gene transmembrane transfer. The findings enrich our knowledge of eDNA in anammox granules and provide a guidance for the specific control of gene transfer through reducing eDNA., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Persulfate based advanced oxidation process is a promising technology for refractory contaminants removal. Cobalt is considered as the most efficient metal in catalyzing peroxymonosulfate decomposition. Although different cobalt based nanomaterials have been developed, easy aggregation and metal ion leaching during catalytic reaction would result in its deficiency. To address the above issue, in this work, carbon supported Co/CoO core-shell nanocomposite was in-situ fabricated by using polyphenol-metal coordinate as precursor. Results indicated that cobalt nanoparticle with size of 10 nm was successfully prepared and well dispersed within the carbon matrix. By using as-prepared material as catalyst, 50 mg/L orange II was completely removed under the condition of 0.2 g/L peroxymonosulfate, 0.05 g/L catalyst, pH = 4.0-10.0. Both sulfate and hydroxyl radicals were formed during peroxymonosulfate decomposition, while sulfate radical dominated the pollutant removal. Mechanism study revealed that the cobalt was the key site for catalyzing peroxymonosulfate decomposition. This work might provide valuable information in designing and fabricating metal anchored carbon composite catalyst for efficiently and cost-effectively activate peroxymonosulfate., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Candidatus Microthrix parvicella has been frequently detected as the dominant filamentous bacteria in bulking sludge and thus seriously affects the stable operation of activated sludge processes. The extremely low growth rate of Ca. M. parvicella and its sensitivity to environmental variations greatly limit the development of effective techniques to control filamentous bulking. Based on previous investigations, a variety of restrictive substrates, operating and culture conditions, environmental factors and other potential inhibitors have varying degrees of impact on the growth of this microorganism. This review systematically summarizes the key factors affecting Ca. M. parvicella growth with a focus on the influencing mechanism. Recent filamentous bulking control strategies are also critically reviewed and discussed. Additionally, research needs for the next few years are proposed with the aim of establishing effective and specific control strategies for filamentous sludge bulking., (Copyright © 2019. Published by Elsevier Ltd.)

The anaerobic ammonium oxidation (anammox) process has the advantages of a high nitrogen removal rate, low operational cost, and small footprint and has been successfully implemented to treat high-content ammonium wastewater. However, very little is known about the toxicity of the heavy metal element Ni(II) to the anammox process. In this study, the short- and long-term effects of Ni(II) on the anammox process in an upflow anaerobic sludge blanket (UASB) reactor were revealed. The results of the short-term batch test showed that the half maximal inhibitory concentration (IC 50 ) of Ni(II) on anammox biomass was 14.6 mg L -1 . A continuous-flow experiment was performed for 150 days of operation, and the results illustrated that after domestication, the achieved nitrogen removal efficiency was up to 93±0.03% at 10 mg L -1 Ni(II). The settling velocity, specific anammox activity and EPS content decreased as the Ni(II) concentration increased. Nevertheless, the content of heme c increased as the Ni(II) increased. These results indicate that short-term exposure to Ni(II) has an adverse impact on anammox process, but the anammox system could tolerate 10 mg L -1 Ni(II) stress after acclimation during continuous-flow operation for 150 days. High-throughput sequencing results indicated that the presence of Ni(II) had an impact on the microbial community composition in the anammox reactor, especially Candidatus Kuenenia. At Ni(II) concentrations of 0-10 mg L -1 , the relative abundance of Candidatus Kuenenia decreased from 36.23% to 28.46%., (Copyright © 2019. Published by Elsevier Ltd.)