Search

The personal care product (PCP) industry is a worldwide multi-billion-dollar industry. Several synthetic compounds like parabens and antimicrobial agents triclosan (TCS) and triclocarban (TCC) are ingredients in many PCPs. Due to growing public awareness of potential risks associated with parabens and other synthetic compounds, more PCPs are being marketed as "green," "alternative," or "natural." We analyzed 19 green and 34 conventional PCP products obtained from a European store for seven parabens, TCC, and TCS. We found no statistically significant difference in the concentrations between green and conventional products. Only four products mentioned parabens in the list of ingredients; however, parabens were detected in 43 products, and at μg/g levels in seven PCPs. Methylparaben was typically present at the highest concentration, and one mascara exceeded the European legal concentration limit of methylparaben. Low concentrations of isopropyl-, isobutyl-, and benzylparabens, which are banned in the EU, were detected in 70% of PCPs. The cumulative estimated daily intake of parabens is an order of magnitude higher for people using only conventional products than those using green products exclusively. We propose that legislation be developed with more explicit rules on when a product can be advertised as "green" to aid consumers' choices., (Copyright © 2022 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Semivolatile organic compounds (SVOCs) are mostly man-made chemicals that distribute between the gas and solid phase in the environment. Many of them could pose harm to people and therefore it is important to know their concentrations in the indoor environment to evaluate the related risks. Inhalation exposure can be assessed using passive sampling. In this study, we employed silicone elastomer as a passive sampler for monitoring gaseous polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs) and polybrominated diphenyl ethers (PBDEs) in indoor air. We performed a sampler calibration study in which samplers consisting of 0.5 mm thick silicone sheets with a total surface area of 300 cm 2 were exposed to indoor air in a university lecture theatre for up to 56 days. Uptake kinetics of SVOCs was studied by collecting 2 samplers every week. The results were used to develop a model based on mass transfer theory that can be used to estimate the air sampling rate R S as a function of compound's molecular volume. We examined release kinetics of performance reference compounds that covered a broad range of silicone-air partition coefficient (log K SA 5.95-9.49) and investigated a hypothesis of isotropic exchange kinetics, i.e. equality of rate constants for uptake and release, of SVOCs. PCBs and OCPs concentration in air calculated from contaminant amounts accumulated in passive samplers were in good agreement with those determined by active sampling running simultaneously during the entire study. The use of performance reference compounds is suitable for in situ passive sampler calibration., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Indoor dust is often used to evaluate levels of organic compounds indoors, particularly for compounds with indoor sources, such as flame retardants (FRs). Yet there are uncertainties about the type of information that can be obtained from indoor dust. This study reports detailed dust sampling to assess spatial variability in indoor dust concentrations, the relationship between FR sources and dust, and the implications when interpreting dust concentrations. Multiple dust samples were collected from a range of surface types in three large rooms: a residential flat, a university seminar room, and a university computer room. Samples were analysed for polybrominated diphenyl ethers (PBDEs), novel halogenated flame retardants (NFRs) and organophosphate esters (OPEs). FR levels in dust varied significantly between and within rooms. Levels typically ranged over one order of magnitude within a room, and up to four orders of magnitude for a few OPEs. The spatial distribution of FRs related (in some cases) to proximity to sources, surface properties, and dust surface loadings. Differences also existed between surface and floor dusts, e.g., the contribution of TBOEP to ∑OPEs was higher in floor than surface dust, which has implications for human exposure assessment; adults typically have more contact with elevated surfaces, while young children have greater contact with floor surfaces. Overall, significant spatial heterogeneity exists in indoor dust, even in seemingly homogeneous indoor spaces, thus hampering comparability between studies and locations when single samples are collected. Composite samples are strongly recommended to limit the influence of spatial heterogeneity., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) are restricted compounds that are ubiquitously detected in the environment, including indoor matrices such as air and residential dust. We report concentrations of PCBs and selected OCPs in indoor air and dust from homes in Canada (23 homes) and Czech Republic (20 homes). Indoor air concentrations of PCBs and OCPs were ∼10 times higher than that outdoors. PCB concentrations of ∼450 ng/m 3 were similar in both countries, higher in homes built before the restrictions on PCBs, and had congener profiles consistent with PCB mixtures manufactured or used in each country. All OCP air concentrations were higher in the Czech Republic than in the Canadian samples, suggesting greater indoor use of, for example, DDT and HCH. These data emphasize the persistence of these organochlorine compounds indoors and their presence in homes even decades after new usage was prohibited. Indoor levels of these legacy POPs remain at similar concentrations to compounds of current concern, such as brominated flame retardants and perfluorinated alkyl substances, emphasizing that they deserve ongoing attention in view of knowledge of PCB and OCP toxicity., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

To fulfill national and international fire safety standards, flame retardants (FRs) are being added to a wide range of consumer products and building materials consisting of flammable materials like plastic, wood and textiles. While the FR composition of some products and materials has been identified in recent years, the limited global coverage of the data and the large diversity in consumer products necessitates more information for an overall picture of the FR composition in common products/materials. To address this issue, 137 individual samples of various consumer products, building materials and wastes were collected. To identify and characterize potential sources of FRs in indoor environment, all samples were analyzed for content of polybrominated diphenyl ethers (PBDEs), hexabromocyclododecanes (HBCDDs) and novel flame retardants (NFRs). The most frequently detected were HBCDDs (85%), with the highest median concentration of Σ 4 HBCDDs of 300 mg kg -1 in polystyrenes. The highest median concentration of Σ 10 PBDEs was found in recycled plastic materials, reaching 4 mg kg -1 . The lowest concentrations were observed for NFRs, where the median of Σ 12 NFRs reached 0.4 mg kg -1 in the group of electrical & electronic equipment wastes. This suggests that for consumer products and building materials that are currently in-use, legacy compounds still contribute to the overall burden of FRs. Additionally, contrasting patterns of FR composition in recycled and virgin plastics, revealed using principle component analysis (PCA), suggest that legacy flame retardants are reentering the market through recycled products, perpetuating the potential for emissions to indoor environments and thus for human exposure., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) are a large group of important chemical compounds with unique and useful physico-chemical properties, widely produced and used in many applications. However, due to the toxicity, bioaccumulation and long-range transport potential of certain PFASs, they are of significant concern to scientists and policy makers. To assess human exposure to PFASs, it is necessary to understand the concentrations of these emerging contaminants in our environment, and particularly environments where urban population spend most of their time, i.e. buildings and vehicles. A total of 126 samples of building materials, consumer products, car interior materials and wastes were therefore analyzed for their content of key PFASs - 15 perfluoroalkyl acids (PFAAs). At least one of the target PFAAs was detected in 88% of all samples. The highest concentration of Σ 15 PFAAs was found in textile materials (77.61 μg kg -1 ), as expected, since specific PFAAs are known to be used for textile treatment during processing. Surprisingly, PFAAs were also detected in all analyzed composite wood building materials, which were dominated by perfluoroalkyl carboxylic acids with 5-8 carbons in the chain (Σ 4 PFCAs up to 32.9 μg kg -1 ). These materials are currently widely used for building refurbishment, and this is the first study to find evidence of the presence of specific PFASs in composite wood materials. Thus, in addition to consumer products treated with PFASs, materials used in the construction of houses, schools and office buildings may also play an important role in human exposure to PFASs., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Seven types of indoor samples, covering five indoor matrices, were collected in a residential room, and analyzed for five classes of semivolatile organic compounds (SVOCs). The goal was to improve the understanding of the relationship between indoor air, surface films and dust, based on differences in sources, physicochemical properties, and indoor environmental characteristics. Comparisons of the five matrices (gas- and particle-phase air, floor dust, surface dust/films and window films) demonstrated that within our test room a semi-quantitative measurement of the SVOC distributions and concentrations could be obtained by air, and composite dust or furniture surface wipes. Dust concentrations varied within the room, and spot samples were not necessarily representative of the average room conditions. Polyurethane foam passive air samplers (PUF-PAS) successfully quantified the total air concentrations of the studied SVOC compound groups, as indoor air concentrations were dominated by gas-phase compounds, however air concentrations of individual particle-bound compounds had higher uncertainty. Measured concentrations of dust/surfaces could be used to estimate air concentrations of legacy SVOCs, demonstrating equilibrium in the room. However, air concentrations of current-use compounds (flame retardants, polycyclic aromatic hydrocarbons (PAHs)) could not be estimated from dust/surface concentrations, demonstrating the influence of ongoing primary emissions and non-equilibrium status in the room., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Ingestion of indoor dust has been highlighted as an important pathway of exposure to brominated flame retardants. Hence, polychlorinated biphenyls (PCBs) were determined in indoor dust from homes in Amarillo/Austin, TX, USA (n=20; median concentration=200 ng Sigma PCB g(-1)); Birmingham, UK (n=20; 48 ng Sigma PCB g(-1)); Toronto, Canada (n=10; 260 ng Sigma PCB g(-1)); and Wellington, New Zealand (n=20; 46 ng Sigma PCB g(-1)). Concentrations in Canadian and US samples were statistically indistinguishable, but exceeded significantly (p<0.05) those in both New Zealand and UK dust. Principal component analysis revealed that while UK samples were enriched comparatively in lower molecular weight congeners; samples from other countries contained proportionally more mid-to-high molecular weight congeners. Concentrations of PCBs determined in air from the same 10 Canadian homes showed concentrations (median=4.9 ng Sigma PCB m(-3)) higher than those reported previously for UK homes (1.8 ng Sigma PCB m(-3)). Interpretation of these data alongside that for dietary exposure from other studies suggest that indoor exposures (i.e. air and dust combined) may be a significant contributor to overall exposure for the majority of the population - ranging from 4.3% to 87% in adults and 1.6-73% in toddlers. While inhalation is the principal indoor pathway under a typical dust ingestion scenario, exposure via dust ingestion exceeds that from either inhalation or diet for a small proportion of North American toddlers.