Search

Purpose An improved analytical method for calculating the natural frequencies of a switched reluctance motor (SRM) stator is proposed in this paper. The method is different from traditional analytical methods, which only consider the influence of mass of the stator poles and windings on the natural frequencies of the SRM stator. This paper aims to consider the influence of stiffness and mass of the stator poles and windings simultaneously and reasonably.Design/methodology/approach An innovated analytical method based on the electromechanical analogy method is presented. In the proposed analytical formulae for calculating the natural frequencies, the influence of the windings on natural frequencies is considered by using the springs to simulate the flexible connection between the stator core and windings, and the stator poles are treated as both additional mass and additional equivalent stiffness. Both three-dimensional (3D) finite-element analysis (FEA) and experimental modal analysis results validate the improved method.Findings The influence of the mass and stiffness of stator winding is considered by using the springs to simulate the flexible connection between the stator core and windings, and the stator poles are treated as both additional mass and additional equivalent stiffness. The traditional analytical method only considers the influence of mass. Therefore, the calculation results are comparatively lower than 3D FEA results and may lead to a large error. The 3D FEA and experimental modal analysis confirm that the proposed method has good precision for low-order natural frequency calculation of SRMs.Originality/value An improved analytical method for calculating the natural frequencies of an SRM stator is proposed. Unlike the traditional analytical method, the proposed method can consider the influence of stiffness and mass of the stator poles and windings. This method is valuable for designers to predict the natural frequencies accurately. [ABSTRACT FROM AUTHOR]

Purpose -- The purpose of this paper is to propose a new three-phase switched reluctance motor (SRM), and achieve high-torque and low-cost. This new SRM's winding configuration uses the double- layer distributed windings, which is different from the conventional SRM's single tooth coils. Design/methodology/approach -- The operating principle of new SRM is analyzed, and the voltage equation and the generated torque are deduced. Finite element method (FEM) and finite element circuit coupled method are utilized to evaluate the new motor's operating performances. The two dimensional (2D) frequency response analysis model is employed in the FEM model. Based on the 2D frequency response analysis model, the magnetic field distribution, self-inductance, and mutual-inductance for the new SRM are analyzed in detail. A co-simulation model using FE analysis package and Matlab-Simulink is proposed to simulate the new SRM drive. The simulated and experimental results verify the new SRM. Findings -- For the new SRM with double-layer distributed windings, a co-simulation method is proposed to analyze its characteristics. The new SRM presents lower torque ripple coefficient and generates larger torque than the conventional SRM, with three-wire and standard full bridge power converter, rather than six-wire and asymmetric half-bridge converter for conventional SRM. Originality/value -- This paper proposes a new SRM with the double-layer distributed windings driven by a standard full bridge inverter. In order to calculate dynamic characteristics of the new SRM, a co-simulation method using FEM and Simulink is proposed to simulate the new SRM drive, where the power inverter and the current chopping control algorithm are implemented. [ABSTRACT FROM AUTHOR]

Purpose - The purpose of this paper is to present a method of modeling the variable reluctance stepper motor using the time-stepping finite element technique. The proposed model is used to obtain the optimal control law for the input circuit solving the linear-quadratic problem. Design/methodology/approach - A strongly coupled field-circuit model of the stepper motor is presented. Also, the method of the optimal control that minimizes the power loss in the motor windings is proposed. Findings - The proposed optimal control method can be applied to the electrical machines connected to the electronic converters. Calculated control signals may be used to obtain the optimal waveforms of the input voltages at each phase of the analyzed machine. Originality/value - The paper examines the application of the presented control method to minimize the power loss in the stator windings of the four-phased variable reluctance stepper motor. [ABSTRACT FROM AUTHOR]