Search

Purpose: The purpose of this paper is to develop a multi-material topology optimization method for permanent magnet-assisted synchronous reluctance motors. Design/methodology/approach: In the proposed method, the optimization procedure consists of two steps. In the first step, the entire rotor area was selected for the design region and the distribution of the core and air materials was optimized. In the second step, the design region was limited to the air region of the former solution and the distribution of magnets and cores or magnets and air was optimized. Findings: Because of the two-step process of the proposed method, the design parameters can be reduced compared to the conventional method. As a result, this study can prevent the solution space from becoming more complex and superior solutions can be founded effectively. Research limitations/implications: Since limited case study is denoted in this paper, much more case studies, for example, three-dimensional optimization problems, are needed to be discussed. Practical implications: The optimal solutions obtained by the proposed method have a smaller magnet volume and higher average torque than that of the conventional method. Originality/value: In the proposed methods, optimization methodology, which consists of two-steps process, is differed from the conventional method. [ABSTRACT FROM AUTHOR]

Purpose: This paper aims to propose an effective method to verify poles polarities of switched reluctance motors (SRMs). Different from the ways of detection poles polarities by permanent magnet in SRMs, the difference of self-inductance between different winding connections is used to verify the pole polarity. Design/methodology/approach: First, the winding connections with the forward and reverse series are proposed. The magnetic circuit models are established to analyze the flux linkage of different winding connections. Then, according to the difference of inductance characteristics, including the self-inductance and the mutual inductance affected by the adjacent poles, it is theoretically feasible to verify the polarity of each pole. Finally, the proposed method is verified by the simulation and experiment on a six-phase SRM. Findings: First, compared to the reverse series, the forward series can produce larger self-inductance when one phase is excited at the same current excitation, which can be used to verify the poles polarities of one phase with different winding connection. Second, the mutual inductance can be used to distinguish the winding connections. Third, the difference of the maximum self-inductance of the winding, which is composed of two adjacent windings, can be used to verify the polarities of the adjacent poles. Originality/value: This paper proposes an effective method to verify poles polarities of SRMs. [ABSTRACT FROM AUTHOR]