Search

Purpose: This paper aims to further improve the efficiency of multi-objective optimization design of synchronous reluctance motors (SynRMs) using the level set (LS) method, which has the advantage of obtaining a practical shape. The solutions obtained by gradient methods tend to be local ones due to the multi-modality of the objective function, especially when multiple objective functions. A huge number of trial calculations are required to obtain a high-quality and broadly distributed Pareto front. Therefore, it is indispensable to effectively get out of the local solutions in the optimization process with the LS method. Design/methodology/approach: The authors propose a novel method appropriately switching multiple objective functions with high independence of sensitivity information. The authors adopt highly independent mathematical expressions for the objective functions of the average torque and torque ripple. In addition, the authors repeatedly perform the optimization while appropriately selecting the sensitivity information of one objective function from multiple ones, which enables the authors to effectively break out of local solutions in the optimization process. Findings: The proposed method was applied to the shape optimization of SynRM flux barriers and successfully searched a more extensive and advanced Pareto front in comparison with the conventional method. Originality/value: The proposed method adopts search spaces with mathematical high independence for average torque and torque ripple. In the optimization process, when the solution search is judged to get stuck by several criteria, the search space is alternately switched to effectively get out of local solutions. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this paper is to develop a multi-material topology optimization method for permanent magnet-assisted synchronous reluctance motors. Design/methodology/approach: In the proposed method, the optimization procedure consists of two steps. In the first step, the entire rotor area was selected for the design region and the distribution of the core and air materials was optimized. In the second step, the design region was limited to the air region of the former solution and the distribution of magnets and cores or magnets and air was optimized. Findings: Because of the two-step process of the proposed method, the design parameters can be reduced compared to the conventional method. As a result, this study can prevent the solution space from becoming more complex and superior solutions can be founded effectively. Research limitations/implications: Since limited case study is denoted in this paper, much more case studies, for example, three-dimensional optimization problems, are needed to be discussed. Practical implications: The optimal solutions obtained by the proposed method have a smaller magnet volume and higher average torque than that of the conventional method. Originality/value: In the proposed methods, optimization methodology, which consists of two-steps process, is differed from the conventional method. [ABSTRACT FROM AUTHOR]

Purpose: High torque ripple is the significant challenge of the synchronous reluctance machine in household electric appliances, electric vehicles and so on. This paper aims to present an optimized design of a synchronous reluctance rotor structure to reduce the torque ripple with improving the average torque by the particle swarm optimization (PSO) algorithm. Design/methodology/approach: The optimization of rotor geometries has been investigated. Most of the rotor parameters such as the width of iron parts, the width of barriers along d and q axes and the endpoint angle of barriers are optimized by a new method using the PSO algorithm. After optimization, the resulted optimum design along with the initial design is simulated by two-dimensional finite element method and results are compared. At the end, a prototype is constructed and tested. Results of the experiment are compared with the simulation results where acceptable adoption is yielded. Findings: Minimizing the torque ripple without losing the average torque is an important achievement of the synchronous reluctance motor (SynRM) optimization; furthermore, the finite element analysis and experimental results indicate that the torque ripple of the SynRM with the optimized rotor is reduced significantly. Also, increasing the number of optimization parameters can effectively obtain an accurate shape of the SynRM barrier. Originality/value: Because of the high number of parameters in synchronous reluctance rotors, the majority of proposed optimizations did not use all geometric parameters of the rotor and tried to simplify the optimization by ignoring several optimization parameters or reducing the number of flux barriers. In this optimization, most of the rotor parameters have been used to achieve the precise barrier shape with the aim of reducing the torque ripple in SynRM. [ABSTRACT FROM AUTHOR]

Purpose: This paper aims to propose an effective method to verify poles polarities of switched reluctance motors (SRMs). Different from the ways of detection poles polarities by permanent magnet in SRMs, the difference of self-inductance between different winding connections is used to verify the pole polarity. Design/methodology/approach: First, the winding connections with the forward and reverse series are proposed. The magnetic circuit models are established to analyze the flux linkage of different winding connections. Then, according to the difference of inductance characteristics, including the self-inductance and the mutual inductance affected by the adjacent poles, it is theoretically feasible to verify the polarity of each pole. Finally, the proposed method is verified by the simulation and experiment on a six-phase SRM. Findings: First, compared to the reverse series, the forward series can produce larger self-inductance when one phase is excited at the same current excitation, which can be used to verify the poles polarities of one phase with different winding connection. Second, the mutual inductance can be used to distinguish the winding connections. Third, the difference of the maximum self-inductance of the winding, which is composed of two adjacent windings, can be used to verify the polarities of the adjacent poles. Originality/value: This paper proposes an effective method to verify poles polarities of SRMs. [ABSTRACT FROM AUTHOR]