Search

In this study, the performance of both surface and borehole time-lapse gravity monitoring to detect CO2 leakage from a carbon storage site is evaluated. Several hypothetical scenarios of CO2 migration in a leaky fault, and thief zones at different depths at the Kimberlina site (California, USA) constitute the basis of the approach. The CO2 displacement is simulated using the TOUGH2 simulator applied to a detailed geological model of the site. The gravity responses to these CO2 plumes are simulated using forward modeling with sensors at ground surface and in vertical boreholes. Results of inversion on one scenario are also presented. The surface-based gravity responses obtained for the different leakage scenarios demonstrate that leakage can be detected at the surface in all the scenarios but the time to detection is highly variable (10–40 years) and dependent on the detection threshold considered. Borehole measurements of the vertical component of gravity provide excellent constraints in depth when they are located in proximity of the density anomaly associated with the presence of CO2, thus discriminating multiple leaks in different thief zones. Joint inversion of surface and borehole data can bring valuable information of the occurrence of leakages and their importance by providing a reasonable estimate of mass of displaced fluids. This study demonstrates the importance of combining multiphase flow simulations with gravity modeling in order to define if and when gravity monitoring would be applicable at a given storage site.

The Tatun geothermal system, located in northern Taiwan, is hosted by the Plio-Pleistocene Tatun volcanic group, consisting dominantly of andesitic lavas, domes and pyroclastic flows. During the late 1960s and early 1970s, geologic mapping, geochemical sampling, geophysical surveys, and the drilling of numerous exploration and temperature gradient wells were conducted at Tatun under the leadership of the Mineral Research and Service Organization (MRSO), the predecessor to the geothermal group at the Industrial Technology Research Institute (ITRI). Deep (1–2 km) wells encountered commercial temperatures (200–300 °C) in the Matsao area, but these initial exploration efforts were discouraged by the presence of very acidic (pH < 3.5) and highly corrosive fluids. Numerous geoscience studies conducted over the past 15 years at Tatun have shown that the central portion of the system is dominated by corrosive volcanic fluids, as evidenced by abundant SO2 as well as HCl. More reduced gases are encountered on the flanks of the system, suggesting that water-rock interaction may have at least partly neutralized the volcanic-derived fluids on the margins of this geothermal system.

An improved version of the Marine UXO characterization system MBUD, called MBUD2, has been built and tested. The improved version has a new data acquisition system and incorporates technical modifications to eliminate the noise encountered in seawater with the MBUD1 version. The target is illuminated with fields from three orthogonal transmitters, and the signal is measured using four three component receivers. The receivers are arranged in a configuration that inherently cancels the response of the system to enclosing seawater, and to the response of the air-sea interface for shallow deployments. The system was operated as a cued system. It is mounted on a simple platform on top of a support structure that is transported to a predefined survey location by a carrier boat, lowered to the sea bottom, and maneuvered by a diver. The support structure extends one meter below the system platform to allow for the object placement to a specific location by the diver in low-visibility conditions. MBUD2 is able to classify a detected object on the basis of its size, orientation, depth, shape and metal content. The classification is done by estimating the principal dipole polarizabilities of a target using 33 channels of normalized induction responses computed at 46 logarithmically spaced times between 0.0005 and 0.013 s after transient shutoff. Our results clearly show that MBUD2 can resolve the intrinsic polarizabilities of the target, and that there are very clear distinctions between symmetric intact UXO and irregular scrap metal. The system was tested on land and in San Francisco Bay with excellent results. The system meets the design requirements: it cancels the response of the seawater and air-sea interface, the measurements are stable and repeatable, and target responses estimated from marine measurements are identical to those from land measurements.

The region surrounding the Modoc Plateau, encompassing parts of northeastern California, southern Oregon, and northwestern Nevada, lies at an intersection between two tectonic provinces; the Basin and Range province and the Cascade volcanic arc. Both of these provinces have substantial geothermal resource base and resource potential. Geothermal systems with evidence of magmatic heat, associated with Cascade arc magmatism, typify the western side of the region. Systems on the eastern side of the region appear to be fault controlled with heat derived from high crustal heat flow, both of which are typical of the Basin and Range. As it has the potential to host Cascade arc-type geothermal resources, Basin and Range-type geothermal resources, and/or resources with characteristics of both provinces, and because there is relatively little current development, the Modoc Plateau region represents an intriguing potential for undiscovered geothermal resources. It remains unclear however, what specific set(s) of characteristics are diagnostic of Modoc-type geothermal systems and how or if those characteristics are distinct from Basin and Range-type or Cascade arc-type geothermal systems. In order to evaluate the potential for undiscovered geothermal resources in the Modoc area, we integrate a wide variety of existing data in order to evaluate geothermal resource potential and exploration risk utilizing ‘play-fairway’ analysis. We consider that the requisite parameters for hydrothermal circulation are: 1) heat that is sufficient to drive circulation, and 2) permeability that is sufficient to allow for fluid circulation in the subsurface. We synthesize data that indicate the extent and distribution of these parameters throughout the Modoc region. ‘Fuzzy logic’ is used to incorporate expert opinion into the utility of each dataset as an indicator of either heat or permeability, and thus geothermal favorability. The results identify several geothermal prospects, areas that are highly favorable for the occurrence of both heat and permeability. These are also areas where there is sufficient data coverage, quality, and consistency that the exploration risk is relatively low. These unknown, undeveloped, and under-developed prospects are well-suited for continued exploration efforts. The results also indicate to what degree the two ‘play-types,’ i.e. Cascade arc-type or Basin and Range-type, apply to each of the geothermal prospects, a useful guide in exploration efforts.