Search

This paper focuses on the risk of water inrush from the old goaf water of the upper coal group to the first mining face of the lower coal group under the condition of fully mechanized caving mining. Data from the 2101 working face of the No. 15 coal seam in the Wulihou Coal Mine were used to calculate the height of the water-conducting fracture zone on the first mining working face and the floor failure depth in the overlying No. 5 coal seam. An engineering geological model was developed, considering the lithological combination of the upper and lower coal groups, as well as the geological and hydrogeological conditions. Numerical simulations were conducted to analyse the deformation and failure characteristics of the roof and floor after dual-seam mining. The results revealed a floor damage depth of 12 m and a water-conducting fracture zone height of 109 m. Field monitoring data confirmed that after mining the 2101 working face, there was no water inrush risk from the overlying old goaf water into the No. 15 coal seam through the water-conducting fracture zone. The research results provide a reference for preventing water inrush accidents in similar fully mechanized top coal caving mining under the old goaf water. [ABSTRACT FROM AUTHOR]

Recently, deep coal mining has posed a significant challenge owing to the threat of water inrush from highly pressured aquifers in the floor strata. Water inrush in the floor strata is often associated with the structural characteristics of the underlying fault zones. The permeability of these fault zones is a critical factor in determining their potential as conduits for water flow. The variation in permeability is attributed to the varying cementation degree across different locations within the fault zones. Hence, this study is based on the key stratum theory and introduces the concept of a water-blocking key stratum within fault zones. This research focuses on the engineering context of the 16th coal seam above the lower coal seam in the 10603 working face of the Yangcun Coal Mine's tenth mining area. The study investigates the activation characteristics of the 10605F5 reverse fault zone, which cuts through the working face. Various methods, including test of simulation of similar materials and numerical simulations, are employed to analyse the hydraulic pressure distribution and the impact of mining activities on the water-blocking key stratum within the 10605F5 reverse fault zone. The research findings will provide valuable insights for preventing fault activation and water inrush. [ABSTRACT FROM AUTHOR]