Search

Objectives: Two earthquakes with a distance less than 40 km occurred in Menyuan, Qinghai Province, China, including Mw 5.9 earthquake on 26th January 2016 and Mw 6.7 earthquake on 8th January 2022. Methods: The interferometric synthetic aperture radar (InSAR) technique was utilized to process Sentinel-1A radar images from both ascending and descending tracks to retrieve high resolution coseismic surface displacement maps for these two Menyuan earthquakes. The coseismic surface displacements were then inverted to determine the fault geometry parameters and the non-uniform fault slip distributions with a dislocation model in an elastic half- space. Results: The results show that the 2016 Menyuan earthquake was a reverse event on a buried fault with a maximum surface displacement of 6.7 cm and 7.0 cm on the ascending and descending tracks, respectively. The maximum slip on the fault plane reached 0.53 m and concentrated at depths of 4 − 12 km. The 2022 Menyuan earthquake ruptured along the NWW - SEE strike with a maximum surface displacement of 78 cm in the satellite radar line of sight and a maximum fault slip of 3.5 m occurred at a depth of approximately 4 km. Conclusions: Considering the tectonic settings around the Lenglongling fault zone, the 2022 Menyuan earthquake is likely to occure in the western segment of the left‐lateral Lenglongling fault, with its western end extending westward to the Tuolaishan fault. By calculating the coulomb failure stress changes (CFS), it is inferred that the 2016 Menyuan earthquake generated considerable positive CFS which might have triggered the 2022 Menyuan earthquake. [ABSTRACT FROM AUTHOR]

The theory and method of mining subsidence monitoring based on D-InSAR(differential interferometric synthetic aperture radar) technology is a hot topic in the current field of mine deformation monitoring. At present, three-dimensional monitoring model of mining subsidence has been constructed successfully by some scholars through integrating single line of sight to D-InSAR technology and mining subsidence law. However, the model is only suitable for the researches on mining subsidence of horizontal coal seam rather than inclined coal seam. In view of the above defects，according to the relationship between deformation of line of sight monitored by D-InSAR and three-dimensional deformation, considering the surface subsidence law of inclined coal seam mining, the surface subsidence monitoring method for inclined coal seam based on single line of sight to D-InSAR technology is proposed. The simulation experiment shows that the absolute relative error of the subsidence monitoring method is less than 9. 53%, with an average of 1. 31%. The absolute relative error of the horizontal movement monitoring along North-South (SN) and East-West (EW) is less than 9. 78%，with an ave-rage of 3. 71%, which meets the mining subsidence monitoring accuracy requirements. The surface movement and deformation caused by the mining of the 9310 working face of Nantun coal mine in yanzhou mining area, Shandong province China during 2012-01-27 - 2012-02-07 are successfully monitored by this method in this paper [ABSTRACT FROM AUTHOR]