Search

The new development pattern is a strategic choice to reshape China's new advantages in international cooperation and competition. It is based on China's current development stage, changes in the environment, and other factors. Located deep within China's interior, Xinjiang is a crucial region for the development of the western region and the Belt and Road Initiative. Its agricultural resources are exported to numerous foreign nations. In the context of the new development pattern, this paper first examines the foreign trade issues in Xinjiang. Second, this paper analyzes the current state of Sino-Kazakhstani trade, in particular the current state of trade in agricultural products. In addition, the growth potential of Xinjiang's agricultural international trade is analyzed utilizing the gravity model and fuzzy algorithm. Finally, countermeasures for the mode of development of Xinjiang's international trade are proposed. [ABSTRACT FROM AUTHOR]

The understanding of formation has always been a challenge for field development. In this paper, we evaluate the reservoir parameters and gas well productivity based on production data. The model of nonuniform conductivity of fractures in multistage fracturing horizontal wells (MFHW) is used to interpret the transient pressure data. Binomial and exponential deliverability equations and pressure dimensionless productivity formula are combined to evaluate the gas well productivity. After that, the key factors that influence gas well production are analyzed, and the gas rate vs. oil nozzle is presented. Results show that the fracture half-length and conductivity for high- and low-conductivity fractures, respectively, are obtained, apart from the reservoir pressure, permeability, skin factor, etc. The test time in each oil nozzle is recommended to extend to achieve stability and to obtain a more accurate absolute open flow potential. The findings of this study provides a guidance for the production data analysis of nonuniform conductivity of fractures in MFHW in the future work. And it can help for the better understanding of predicting gas production rates in MFHW. [ABSTRACT FROM AUTHOR]

Run-of-mine fragmentation is an important aspect of mine productivity optimization, as it affects all mine-to-mill processes. The current blasting fragmentation calculation methods do not consider the 3D geometric information. Therefore, their calculation results are imprecise. 3D laser scanning is a technique for extracting the 3D geometric information of an object by constructing a 3D point cloud model, with which extra information on the geometrical characteristics of an object could be captured than with the technique of 2D image processing. In this paper, 3D laser scanning technology was utilized for the calculation of the rock blocks on the surface of a muck pile, and the information about the surface blocks was utilized as the samples for the statistical estimation of blasting fragmentation of muck pile (BFMP). Monte Carlo simulation was utilized as the statistical estimation method for the BFMP. In the lab experiment, results from 2D image processing technique and from 3D laser scanning technique combined with statistical estimate were compared with the physical measurements utilizing a water tank, which show that results with 3D laser scanning are more similar to the physical measurement. Finally, the applicability of 3D laser scanning technology combined with statistical methods to the calculation of blast fragmentation was estimated through field tests in Biesikuduke and Santanghu mine, two open-pit coal mines in Xinjiang Province of western China. Results show that the accuracy of the statistical estimation results of BFMP has a particle size deviation of 1–3 cm. [ABSTRACT FROM AUTHOR]

Regional inequality in western China has been rarely examined and has risen as an important issue in the Chinese academic circle. This study, taking Xinjiang as a case, investigated regional inequality in Xinjiang since the 1990s. The results show that the interregional inequality became more prominent, while the overall regional disparities among counties and cities have experienced an inverted U-shape path and have been mainly caused by the inequality of the intra-north part of the province. Counties with high economic development levels were mainly located in northern Xinjiang and had a high probability of further moving economic levels. We further found that the regional development pattern in Xinjiang was significantly associated with spatial accessibility, followed by population density and urbanization factors. This paper deepens our understanding of the complex pattern and mechanism of regional inequality in western China, and local specific policies, therefore, are needed to solve the problem. [ABSTRACT FROM AUTHOR]

At present, there is insufficient research on the refinement of the vertical structure of winter snowstorm systems in arid areas, and, compared with the central and eastern China, the observation sites in arid areas of northwestern China are scarce. To deepen the understanding of dynamics and microphysical processes and improve the level of forecasting and warning of snowstorms in northwestern China, the Institute of Desert Meteorology, China Meteorological Administration, Urumqi, carried out the Central Asia Extreme Precipitation Observation Test (CAEPOT) in Yili, Xinjiang, a typical arid region in China in February 2020. This paper uses multiple fine detection datasets obtained from the CAEPOT, including radar wind profiler, ground-based microwave radiometer, and millimeter-wave cloud radar to analyze macroscopic characteristics and microphysical changes of snowstorm system in Xinjiang. Studies have shown that the low trough with sufficient moisture, heat, power conditions, and weakening banded cloud system, which moved eastward from the Aral Sea to the west of Xinjiang during the snowstorm, were the key influencing system of this snowstorm. Before the snowstorm, the vertical shear of the horizontal wind field was severe, which aggravated the instability of the atmosphere, and there was upward motion in the lower atmosphere. A variety of physical quantities related to moisture showed a tendency to increase at the lower level and could be used as an early warning signal for snowstorm about 8 hours in advance, and the cloud and snow particles observed by millimeter-wave cloud radar were simultaneously developing upward and downward from 4 km, providing snowstorm warning 12 hours in advance. During the snowstorm, the horizontal wind speed and vertical speed were obviously enhanced, and the physical quantities related to moisture further increased, and, with the blocking and uplifting of the Tianshan Mountains, the snowstorm increased. The particles collided and grew while falling, resulting in a decrease in particle concentration and an increase in particle radius from high altitude to the ground, eventually resulting in near-ground reflectivity factor up to 30 dBz. In addition, reflectivity factor, physical quantities related to moisture, wind field, particle concentration, and particle radius all had a good correspondence with the beginning, end, and intensity of snowstorm, so when the physical quantities mentioned above weakened and stopped, snowstorm also weakened and stopped. In a word, this research is an important and meaningful work that provides more backgrounds and references for the forecast and warning of snowstorm in northwestern China. [ABSTRACT FROM AUTHOR]

Radio telescopes play an important role in lunar exploration projects, manned space flight projects, and navigation systems. China is constructing a giant 110 m aperture ground-based fully steerable radio telescope in Qitai County, Xinjiang Uygur Autonomous Region. In this paper, a 110 m aperture fully steerable radio telescope prestressed back frame structure is proposed and optimized to improve the reflector accuracy and to reduce the weight of the telescope. First, prestressed cables are introduced into the back frame structure, and three innovative cable layout schemes are presented. Second, for stress state analysis, the wind pressure distribution on the main reflector is explored using wind tunnel experiments. Third, some improvements in genetic algorithms for addressing computational complexity are explained. Finally, the effects of prestressed cables on the weight reduction and reflector accuracy improvement are analysed. Additionally, in order to evaluate the safety of the prestressed back frame structure, its strength has been checked, and the internal force and displacement under static conditions and in earthquakes are interpreted in detail. [ABSTRACT FROM AUTHOR]

The Permian strata in the southwest Tarim Basin contain organic reefs with good exploration prospects. Based on observations of outcrops and thin section examination of the Permian Keziliqiman Formation reef in the Sangzhu section of Pishan County, Xinjiang, northwest China, the basic characteristics of the reef are studied. This organic reef, as a point reef which grew along the platform margin, has a complete subfacies system of base, core, front, back, and cap. The lithology of the lower zone of the core is mainly sponge bafflestone, while that of the upper zone is coral framestone. The development of reefs was controlled by the rise and fall of sea level. It was when the sea level rose in southwest Tarim Basin that the Keziliqiman reef gradually came into existence. Later, with rapid decline of sea level in that area, the Sangzhu section turned into a hot and dry supratidal zone, where algae began to flourish, dolomitization intensified, reef building organisms died en masse, and eventually the reef died. Paleontological and geochemical characteristics of the Sangzhu reef indicate that the sea-level decline in southwest Tarim Basin may be related to the Early Permian glaciers. Since then, the reef began to be transformed by diagenesis. But on the whole, its effect was not significant. Furthermore, its diagenetic process had more to do with marine fluids than with nonmarine fluids, for nonmarine fluids was powerful enough to affect bioclasts but powerless to affect micritic matrix. [ABSTRACT FROM AUTHOR]

The Integrated Multi-Satellite Retrievals for Global Precipitation Measurement (IMERG) V06 product has been widely studied, but the errors and the source of the errors within IMERG over diverse climate regions still need to be quantified. To this end, the final run gauge-calibrated IMERG V06 (V06C) and uncalibrated IMERG V06 (V06UC) products are comprehensively evaluated here against 2088 precipitation gauges acquired between March 2014 and June 2018 over China. Moreover, V06C and V06UC rainfall estimates are compared against the Precipitation Estimation from Remotely Sensed Imagery using Artificial Neural Networks (PERSIANN)-Climate Data Record (CDR) and the Climate Prediction Center morphing technique (CMORPH) gauge-satellite blended (BLD) products. Continuous statistical indices and two error decomposition schemes are used to quantify their performance. Key results are as follows. (1) Except for V06UC's relatively high underestimation over the Tibetan Plateau (TP) and high overestimation over Xinjiang (XJ), Northeastern China (DB), and Northern China (HB) and CDR's severe overestimation over TP, all four satellite-based precipitation products can generally capture the spatial pattern of precipitation over China. Moreover, the satellite-based precipitation estimates agree better with gauge observations over humid regions than over semi-humid, semi-arid, and arid regions. (2) All the statistical indicators show that CDR has the worst performance, whereas BLD is the best precipitation product. As for the two IMERG products, V06C has improved V06UC's precipitation estimate. Results show that the gauge calibration algorithm (GCA) used in IMERG has active effect in terms of r, POD, and CSI. (3) Within all subregions, all four satellite-based precipitation products demonstrate their worst performance over the arid XJ region which exhibits the highest FAR and lowest POD and CSI values among all regions. (4) In terms of intensity distribution, for summer over China, the four satellite-based precipitation products generally overestimate the frequency of moderate precipitation and light precipitation events (<25 mm/day) and underestimate heavy precipitation events (>42 mm/day). (5) The relative bias ratio (RBR) analysis shows that the contribution of missed precipitation tends to be lower over wetter regions. In addition, for the same climate region, the contribution of missed precipitation is clearly lower in summer than in winter. In summer, false precipitation dominates the total error, whereas missed and false precipitation are the two leading error sources in winter. Future algorithm refinement efforts should focus on decreasing FAR in summer and winter and improving missed snow events during the winter. [ABSTRACT FROM AUTHOR]

With the increase in the depth of large-scale open-pit mining, many mines have to face problems such as what is the effect of open-pit blasting on the rock slope and how to ensure the stability of a high-steep slope. The east slope of the Beizhan iron mine in Hejing County, Xinjiang, belongs to the typical open-pit high and steep slope of mined hanging-wall ore. To study the effect of open-pit blasting vibrations on hanging-wall slope stability, the intelligent blasting vibration detector was used to monitor the open-pit blasting wave of the Beizhan iron mine and the corresponding numerical model was established. We fitted the transmission law of slope blasting vibration by Sodev's regression formula and calculated stress, strain, and vibration velocity of the whole slope by numerical simulation. The result showed that the fitting functional relationship was correct and could be the basic rule of predicting the maximum charge amount per delay interval and minimum safe distance for this area. The estimated open-pit blasting charge weight was reasonable and blasting vibrations would have little effect on the hanging-wall slope. The research method and conclusions in this article have numerous reference values for studying the hanging-wall slope's kinetic stability. [ABSTRACT FROM AUTHOR]

Previous studies on the technique for using the remaining oil are incomplete and inaccurate according to the position of the interlayer of the Steam-Assisted Gravity Drainage (SAGD) technique, and comparative studies of infilled horizontal wells are lacking. In this study, the SAGD well pair in the superheavy oil reservoir in the Z block in the Xinjiang Oilfield, China, was taken as an example. According to the reservoir's geological parameters and production parameters, a typical well group geological model was created for the first time. The model divided the well groups in block Z into three categories according to the position of the interlayer, the production degree of the horizontal section, the oil recovery ratio, and the available degree of reserve control. According to the geological classification results, different typical well groups without an interlayer, with an interlayer located above the steam injection well, and with an interlayer located between the well pairs were classified and analyzed using numerical simulations. This was the first time the infilled horizontal well technique was compared with the infilled vertical well-assisted SAGD technique. In addition, the steam chamber connection law of the infilled vertical well-assisted SAGD was clarified. The results show that for reservoirs without an interlayer, the use of infilled horizontal well-assisted SAGD could speed up the lateral connection of the steam chambers and reduce the residual oil saturation. For reservoirs with a low production degree in the horizontal section and that are affected by an interlayer, an infilled vertical injector could be used with the assisted SAGD technique to increase the oil recovery by 5%–13%. The results of this study provided strong guidance for the next step in using enhanced oil recovery techniques to achieve traditional SAGD production from superheavy oil reservoirs with an interlayer. [ABSTRACT FROM AUTHOR]

A field test in the Xinjiang oilfield in China shows that the viscosity of heavy oil has a certain influence on the combustion dynamics and injection-production performance of fire flooding. The experiment in this study uses a one-dimensional combustion tube to study the temperature, gas composition, and air injection pressure and the production performance of the fire flooding of heavy oil with different viscosities. The results show that the oil viscosities of 1180–22500 mPa·s can achieve stable combustion, and the O2 content of the gas produced during the stable combustion stage is <0.5%. The higher the viscosity of the heavy oil, the higher the temperature in the burned zone and the smaller the range of the temperature increase in the unburned zone. The air injection pressure will increase rapidly until a stable seepage channel is formed, and then, it will drop to a level close to the formation pressure. High-viscosity heavy oil requires a higher air injection pressure and will remain in the high-pressure stage for a longer period of time. Low-viscosity heavy oil has a low water cut in the early stage of fire flooding, a large oil production rate, and a low and stable air–oil ratio. The water cut of high-viscosity heavy oil increases rapidly in the early stage of fire flooding and then decreases gradually, so a good air–oil ratio can only be obtained in the middle and late stages of fire flooding. Thus, fire flooding may be more suitable for application in common heavy oil and some extra heavy oil reservoirs with lower viscosities. [ABSTRACT FROM AUTHOR]

It is challenging to enhance heavy oil recovery in the late stages of steam flooding. This challenge is due to reduced residual oil saturation, high steam-oil ratio, and lower profitability. A field test of the CO2-assisted steam flooding technique was carried out in the steam-flooded heavy oil reservoir in the J6 block of the Xinjiang oil field (China). In the field test, a positive response to the CO2-assisted steam flooding treatment was observed, including a gradually increasing heavy oil production, an increase in the formation pressure, and a decrease in the water cut. The production wells in the test area mainly exhibited four types of production dynamics, and some of the production wells exhibited production dynamics that were completely different from those during steam flooding. After being flooded via CO2-assisted steam flooding, these wells exhibited a gravity drainage pattern without steam channeling issues, and hence, they yielded stable oil production. In addition, emulsified oil and CO2 foam were produced from the production well, which agreed well with the results of laboratory-scale tests. The reservoir-simulation-based prediction for the test reservoir shows that the CO2-assisted steam flooding technique can reduce the steam-oil ratio from 12 m3 (CWE)/t to 6 m3 (CWE)/t and can yield a final recovery factor of 70%. [ABSTRACT FROM AUTHOR]

There are water resource shortages and frequent drought disasters in the arid region of northwestern China (ARNC). The purpose of this study is to understand the spatiotemporal variations of the droughts in this region and to further estimate future changes. Multiple drought indexes such as the standardized precipitation index (SPI), the standardized precipitation evapotranspiration index (SPEI), and the self-calibrated Palmer drought severity index (SC-PDSI) are used to investigate the temporal and spatial characteristics of the ARNC drought from 1950 to 2012. Our results indicate the following: (1) The drought indexes exhibit significant increasing trends, and the highest drought frequency occurred in the 1960s, followed by a decreasing trend during the next few decades. All four seasons exhibit a wet trend, with a higher drought frequency in summer than in the other seasons. (2) The changes of the drought indexes in the ARNC also exhibit distinct spatial variations, with a wet trend in the subregions of North Xinjiang (NXJ), the Tianshan Mountains (TS), South Xinjiang (SXJ), and the Qilian Mountains (QL), but with a dry trend in the subregions of the Hexi Corridor (HX) and the western part of Inner Mongolia (WIM). (3) There was a major climate variability in the ARNC that occurred in the 1980s, and there were dry and wet climate oscillation periods of 8a, 17a, and >20a. [ABSTRACT FROM AUTHOR]

Summary Large fish species are at high risk of extinction because of life cycle characteristics and migratory fishes are often vulnerable to river modifications and overexploitation. The freshwater fish family Cyprinidae has the highest diversity in species, varied morphological and behavioral properties, and a wide range of habitat requirements. This study included an analysis of the conservation attention on large, migratory cyprinid species, a summary of threats jeopardizing the endangered species in this group, and a case study on little known species from northwest China. About 1% of all cyprinid species exceed 1 m in total length, and most of these fishes have migratory behaviors. Most of these species (79%) have not been evaluated for conservation attention, and a minor portion that have been evaluated were considered endangered. The threats to large migratory cyprinids include all the common threats to freshwater biodiversity: overexploitation, habitat alteration, water pollution, flow modification, and species invasion. The first two threats explain most of the decline in abundance and range of large, migratory cyprinids, and the others are sometimes important. The case of the Xinjiang datou fish ( Aspiorhynchus laticeps) illustrates how an impressive species can be lost without much scientific or public attention. The analysis of conservation attention, threats, and the case study support the conclusion that large, migratory cyprinids are not receiving conservation efforts that should be focused on fish species that are especially vulnerable to human impacts. [ABSTRACT FROM AUTHOR]