Search

Tunnel lining falling blocks can cause great threats to traffic safety, resulting in traffic interruptions or speed limits and endangering operational safety. Traditional lining disease remediation measures have low efficiency and high costs and are time consuming. Combining the research methods used in the literature, indoor testing, and model experiments, a very normal material, namely, polyurea spray film material, is proposed as a means by which to remediate the lining falling block disease in tunnels. A 1 : 1 tunnel lining structure model was established at the site, and four experimental conditions were tested. The experiments revealed that the tensile stress was less than the tensile strength and that no tensile fracture occurred in the polyurea spray film material under the joint action of the block's self-weight and aerodynamic loads. Factors such as side seam treatment, surface sanding, and spray temperature may influence the bond strength of the polyurea spray film material. In order to remediate the issue of lining blocks falling, we recommended increasing the bond strength between the spray film material and the concrete or increasing the thickness of the polyurea spray film material. [ABSTRACT FROM AUTHOR]

This paper concerns the dynamic performance analysis of the vehicle ISD (inerter-spring-damper) suspension employing an eccentric inerter. Firstly, the quarter car model of the two basic vehicle suspension layouts involving an eccentric inerter, namely, the series-connected layout and the parallel-connected layout, is established. Then, by considering the overall performance such as the vehicle body acceleration, the suspension working space, and the dynamic tire load, the key parameters of the two suspensions are optimized by using the genetic algorithm. Simulation analysis results indicate that the series-connected vehicle ISD suspension is superior to the parallel-connected one, and all of the RMS values of the body acceleration, the suspension working space, and the dynamic tire load are decreased significantly by comparing to the conventional suspension, while the improvement of the parallel-connected vehicle ISD suspension is relatively poor. At last, the impact of the flywheel eccentricity and the screw pitch on the dynamic performance indices of the two suspensions is discussed, and the trade-offs among the three performances are analyzed, which will provide a guide method for the suspension design when considering the eccentric factor. [ABSTRACT FROM AUTHOR]

Oridonin (ORI), the major pharmacological component extracted from a traditional Chinese medicine, possesses a beneficial effect on myocardial ischemia/reperfusion (I/R) injury. However, the underlying molecular mechanism by which ORI effects take place is not completely known. Thus, whether ORI works via downregulating oxidative stress and nod-like receptor protein-3 (NLRP3) inflammasome pathway was investigated in this study. Mice underwent surgery to induce myocardial I/R injury, and some were administered ORI (10 mg/kg/day) pretreatment, while others were not. The myocardial enzymes' levels, infarct area, and inflammatory injury were measured. The activation situation of oxidative stress and NLRP3 inflammasome was also detected. We found that ORI pretreatment significantly alleviated CK-MB and cTnI levels and infarct size induced by I/R. ORI mitigated the inflammatory injury by decreasing the pathological damage and lowering TNF-α, IL-1β, and IL-18 levels. Moreover, the SOD1 and eNOS levels were significantly increased by ORI, while MDA and iNOS levels were relatively decreased. The oxidative stress was reversed using ORI pretreatment. Importantly, NLRP3 inflammasome pathway was also inhibited by ORI, as reflected by the lower protein levels of NLRP3, caspase-1, and IL-1β. In conclusion, ORI alleviates myocardial injury induced by I/R via inhibiting the oxidative stress and NLRP3 inflammasome pathway. [ABSTRACT FROM AUTHOR]