Search

This work investigates high-frequency measurements for the contribution to the understanding of different stall inception types in high-speed multistage compressors. A 3.5-stage high-speed axial multistage compressor is investigated with a 2 MW test rig in the Laboratoire de Mécanique des Fluides et d’Acoustique (LMFA) at Ecole Centrale de Lyon, France. Two different types of instabilities arise in this compressor as a function of shaft speed. At part speed, a controversy called “rotating instability” type flow field modulation is identified with the measurements. New results are the demonstration of the periodic behavior of this instability and the analogy to classical frequency modulation, periodic to one revolution of the instability. Furthermore, the amplitude of the instability is modulated by the time period of a rotor revolution. At nominal speed, the abrupt spike type stall inception is detected, taking usually less than five rotor revolutions. [ABSTRACT FROM AUTHOR]

SUMMARY Two-stage isolated converters for photovoltaic (PV) applications commonly employ a high-frequency transformer (HFT) on the DC-DC side, submitting the DC-AC inverter switches to high voltages and forcing the use of insulated-gate bipolar transistors instead of low-voltage and low-loss metal-oxide-semiconductor field-effect transistors. This paper shows the modeling, control and simulation of a single-phase full-bridge inverter with HFT that can be used as part of a two-stage converter with transformerless DC-DC side or as a single-stage converter (simple DC-AC inverter) for grid-connected PV applications. The inverter is modeled to obtain a small-signal transfer function used to design the P + Resonant current control regulator, whose main advantages are the simplicity for implementation in single-phase systems and zero steady state error with sinusoidal current. A high-frequency step-up transformer results in low-voltage switches and better efficiency compared with converters in which the transformer is used on the DC-DC side. Simulations and experimental results with a 200-W prototype are shown. Copyright © 2013 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]