Search

Bifacial solar cells based on organic-inorganic perovskite are fabricated with a laminating process. The structure of the devices is ITO/SnO2/CH3NH3PbI3/NiOx/ITO, in which both electrodes are the transparent ITO layer. Therefore, the device can receive light from both sides. By laminating the two half-devices, ITO/SnO2/CH3NH3PbI3 and CH3NH3PbI3/NiOx/ITO, at high temperature with pressure, the merging of the middle perovskite layers is enhanced. The optimized bifacial PSCs show a Voc of 0.85 V, FF of 0.58, Jsc of 17.53 mA/cm2, and PCE of 8.47%. The photovoltaic performance varies when the light is illuminated from different sides of the bifacial PSCs. With illumination from the SnO2 side, the Voc and Jsc of the PSCs are apparently higher than those from the NiOx side, suggesting more severe electron-hole recombination at the NiOx/perovskite interface than at the SnO2/perovskite interface.

Angelica Sinensis Radix (Danggui, DG) is one of the most commonly prescribed traditional Chinese medicines. The organic components include phthalides and phenolic acids. Meanwhile, inorganic elements play an important role in clinical effect. DG and its different parts have different effects. There is no relevant report on the analysis of organic compounds and inorganic elements among them. Therefore, ultra-high-performance liquid chromatography coupled with triple quadrupole mass spectrometry was developed for the simultaneous determination of 13 organic components (8 phthalides and 5 phenolic acids), and 8 inorganic elements were determined by inductively coupled plasma mass spectrometry. The contents of 32 samples were analyzed by orthogonal partial least squares discrimination analysis, hierarchical cluster analysis, and least-significant difference of one-way analysis of variance. The results showed that the differences were significant among DG and its different parts. 11 difference markers (Ca, Z-ligustilide, Mg, Mn, Fe, Na, K, Cu, Zn, coniferyl ferulate, and senkyunolide A) were obtained by variable importance for the project. These difference markers were some different among DG and its different parts, especially Z‐ligustilide, coniferyl ferulate, Mg, Zn, the differences were significant. This study can provide a reference for DG research.

Chloramphenicol- (CAP-) restricted access media-molecularly imprinted polymers (CAP-RAM-MIPs) were prepared by precipitation polymerization using CAP as a template molecule, 2-diethylaminoethyl methacrylate (DEAEM) as a functional monomer, ethylene glycol dimethyl acrylate (EDMA) as a crosslinking agent, glycidyl methacrylate (GMA) as an outer hydrophilic functional monomer, and acetonitrile as a pore former and solvent. The CAP-RAM-MIPs were successfully characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis. The adsorption performance was investigated in detail using static, dynamic, and selective adsorption experiments. Adsorption equilibrium could be reached within 11 min. The CAP-RAM-MIPs had a high adsorption rate and good specific adsorption properties. Scatchard fitting curves indicated there were two binding sites for CAP-RAM-MIPs. Adsorption was Freundlich multilayer adsorption and consistent with the quasi-second kinetic model. Using CAP-RAM-MIPs for selective separation and enrichment CAP in bovine serum in combination with high-performance liquid chromatography (HPLC), CAP recovery ranged from 94.1 to 97.9% with relative standard deviations of 0.7–1.5%. This material has broad application prospects in enrichment and separation.

Several effective constituents, such as vanillin, ferulic acid, senkyunolide I, senkyunolide H, coniferyl ferulate, Z-ligustilide, butylphthalide, senkyunolide A, and levistilide A, are unstable and possess mutual transformation relationships in Chuanxiong Rhizoma (CR). Traditional Chinese medicine mainly involves decoction, and the content of effective constituents and antiplatelet aggregation bioactivity (AAB) in CR may vary with different decoction time (10 min, 20 min, 30 min, 40 min, 50 min, and 60 min). Here, we showed that coniferyl ferulate and levistilide A were detected in CR material, but not in the decoction. The effective components possessed transformation and degradation in CR decoction of different times. The effective components and the strength of AAB at 10 and 20 minutes were the strongest, followed by 30–50 minutes, and 60 minutes were the weakest by analysis of SIMCA-PLS in CR decoction of different times. In the Pearson correlation analysis, there were correlations (P

This study presents a new strategy for the detection of enrofloxacin (ENR) in food samples by the use of monodisperse ENR molecularly imprinted polymers (MIPs). Using enrofloxacin as template molecule, methacrylic acid as functional monomer, and ethylene diglycidyl ether as cross-linker, surface molecularly imprinted polymers (MIPs) were prepared on the surface of polymeric glycidyl methacrylate-ethylene glycol dimethacrylate (PGMA-EDMA) microspheres. The surface morphology and imprinting behavior of PGMA-EDMA@MIPs were investigated and optimized. Synthesized PGMA-EDMA@MIPs showed good physical and chemical stability and specific recognition toward fluoroquinolones. The introduction of PGMA-EDMA microspheres greatly increased the adsorption area of PGMA-EDMA@MIPs and increased the adsorption capacity of target molecules. The core shell structure increased the adsorption rate, and adsorption equilibrium was achieved within 6 min, much higher than that of MIPs synthesized by traditional methods. Enrofloxacin in milk samples was detected by molecular imprinting solid phase extraction (MISPE) combined with high performance liquid chromatography (HPLC). Implementing this method resulted in a recovery rate of 94.6~109.6% with a relative standard deviation (RSD) of less than 3.2%. The limit of detection (LOD) of this method was identified as three times the signal-to-noise ratio (10 μg/L). In summary, this work proposed a sensitive, rapid, and convenient method for the determination of trace ENR in food samples.

Crack initiation is related to the behavior of the preexisting microcracks within a rock specimen, which suggests the specimen starts to fail. The determination of crack initiation stress is important for identifying the elastic stage and related mechanical parameters. Uniaxial compression tests with acoustic emission monitoring were performed to study crack initiation for tight sandstone, loose sandstone, and granite. The evolution of the cracking mode, i.e., the statistics of the cracking mode under compression, was obtained through modified acoustic emission parameter analysis. Based on the logarithm of the acoustic emission parameter (LAEP), a cracking mode analysis (CMA) method is proposed and used to determine the crack initiation stress. Results from the tests indicate that the crack initiation stress between the same rock specimens obtained by CMA is very close. The mean ratio of crack initiation stress to compression strength is 0.45, 0.34, and 0.35 for tight sandstone, loose sandstone, and granite, respectively. According to the results of CMA, crack volumetric strain (CVS) method, and lateral strain response (LSR) method, there is no big difference among those methods in tight sandstone and loose sandstone. In granite, the results obtained by CMA are close to those obtained by CVS, but smaller than those obtained by LSR. The CMA interprets the initiation of cracks from the fracture behavior of microcracks and is an objective method to determine the initiation stress.

Amblyopia results from inadequate visual experience during the critical period of visual development. Abnormal binocular interactions are believed to play a critical role in amblyopia. These binocular deficits can often be resolved, owing to the residual visual plasticity in amblyopes. In this study, we quantitatively measured the sensory eye dominance in treated anisometropic amblyopes to determine whether they had fully recovered. Fourteen treated anisometropic amblyopes with normal or corrected to normal visual acuity participated, and their sensory eye dominance was assessed by using a binocular phase combination paradigm. We found that the two eyes were unequal in binocular combination in most (11 out of 14) of our treated anisometropic amblyopes, but none of the controls. We concluded that the treated anisometropic amblyopes, even those with a normal range of visual acuity, exhibited abnormal binocular processing. Our results thus suggest that there is potential for improvement in treated anisometropic amblyopes that may further enhance their binocular visual functioning.

Periodontitis is the most common cause of tooth loss and bone destruction in adults worldwide. Human periodontal ligament stem cells (hPDLSCs) may represent promising new therapeutic biomaterials for tissue engineering applications. Stromal precursor antigen-1 (STRO-1) has been shown to have roles in adherence, proliferation, and multipotency. Parathyroid hormone (PTH) has been shown to enhance proliferation in osteoblasts. Therefore, in this study, we aimed to compare the functions of STRO-1(+) and STRO-1(−) hPDLSCs and to investigate the effects of PTH on the osteogenic capacity of STRO-1(+) hPDLSCs in order to evaluate their potential applications in the treatment of periodontitis. Our data showed that STRO-1(+) hPDLSCs expressed higher levels of the PTH-1 receptor (PTH1R) than STRO-1(−) hPDLSCs. In addition, intermittent PTH treatment enhanced the expression of PTH1R and osteogenesis-related genes in STRO-1(+) hPDLSCs. PTH-treated cells also exhibited increased alkaline phosphatase activity and mineralization ability. Therefore, STRO-1(+) hPDLSCs represented a more promising cell resource for biomaterials and tissue engineering applications. Intermittent PTH treatment improved the capacity for STRO-1(+) hPDLSCs to repair damaged tissue and ameliorate the symptoms of periodontitis.

Endoscopic thyroidectomy is a relatively new approach in treating differentiated thyroid cancer. Since last decades, more and more endoscopic thyroidectomies have been performed. We review the indications and contraindications, methods, and postoperational complications of this surgical procedure. Lots of surgical approaches have been developed in endoscopic thyroidectomy for differentiated thyroid cancer. Compared to conventional thyroidectomy, scarless endoscopic thyroidectomy has a superior cosmetic result. And it also reduces the incidence of hypesthesia, paresthesia, or feelings of self-consciousness. However, the outcome depends, to a large extent, on the skill of the operator and the learning curve being relatively long. With the development of surgical equipments and skills, operation time and complications will be reduced. Indications of endoscopic thyroidectomy will be widened and it will be more and more performed.