Search

A limitation in research on bolt anchoring is the unknown relationship between dynamic perturbation and mechanical characteristics. This paper divides dynamic impulse loads into engineering loads and blasting loads and then employs numerical calculation software FLAC3D to analyze the stability of an anchoring system perturbed by an impulse load. The evolution of the dynamic response of the axial force/shear stress in the anchoring system is thus obtained. It is revealed that the corners and middle of the anchoring system are strongly affected by the dynamic load, and the dynamic response of shear stress is distinctly stronger than that of the axial force in the anchoring system. Additionally, the perturbation of the impulse load reduces stress in the anchored rock mass and induces repeated tension and loosening of the rods in the anchoring system, thus reducing the stability of the anchoring system. The oscillation amplitude of the axial force in the anchored segment is mitigated far more than that in the free segment, demonstrating that extended/full-length anchoring is extremely stable and surpasses simple anchors with free ends. [ABSTRACT FROM AUTHOR]

A limitation in research on bolt anchoring is the unknown relationship between dynamic perturbation and mechanical characteristics. This paper divides dynamic impulse loads into engineering loads and blasting loads and then employs numerical calculation software FLAC3D to analyze the stability of an anchoring system perturbed by an impulse load. The evolution of the dynamic response of the axial force/shear stress in the anchoring system is thus obtained. It is revealed that the corners and middle of the anchoring system are strongly affected by the dynamic load, and the dynamic response of shear stress is distinctly stronger than that of the axial force in the anchoring system. Additionally, the perturbation of the impulse load reduces stress in the anchored rock mass and induces repeated tension and loosening of the rods in the anchoring system, thus reducing the stability of the anchoring system. The oscillation amplitude of the axial force in the anchored segment is mitigated far more than that in the free segment, demonstrating that extended/full-length anchoring is extremely stable and surpasses simple anchors with free ends. [ABSTRACT FROM AUTHOR]

Understanding the acoustic emission effects on bolts under cyclic loading is of great significance for the support of roadways. The presented research focuses on the acoustic emission characteristics of bolts under cyclic loading. The following main conclusions were drawn: (1) With a higher loading frequency, the acoustic emission counts rate increases, while the total energy released in a given cyclic loading path decreases. (2) A fitting formula is established according to the relationship between the tension amplitude and cumulative acoustic emission counts, which can analyze the tension magnitude level of the cyclic load. (3) A damage factor for a cyclic load is proposed based on the acoustic emission counts generated during the cyclic and monotonic loading process that can analyze the degree of damage to the anchorage system caused by the cyclic load. (4) Based on the spatial distribution of the acoustic emission orientation points and the acoustic emission energy generated during the pull-out process, the acoustic emission damage evolution process of the anchorage specimens is deduced, and the mechanism of the high stability of the pretension anchorage system after cyclic loading is analyzed. The above conclusions may provide some experimental references for the application of acoustic emission technology in bolts supporting roadways. [ABSTRACT FROM AUTHOR]