Search

Switched-capacitor-based multilevel inverters have been gaining increasing attention in recent years in view of their voltage-boosting capability and capacitor self-balancing properties. However, the existing topologies, which comprise frontend switched-capacitor cells and a backend H-bridge, result in longer discharging duration in some of their switched-capacitors. In addition, the adoption of backend H-bridge introduces common-mode voltage and necessitates multiple dc sources for voltage level extension. To resolve these problems, this article proposes a novel topology comprises a T-type inverter and n cascaded switched-capacitor cells. It requires only a single dc source and it manages to mitigate the common-mode voltage by connecting the neutral of ac output to the mid-point of dc link. All switched-capacitors in the proposed topology are ensured to be charged for at least half of the fundamental period to alleviate the capacitor voltage ripples and current spikes. The operation of the proposed topology is analyzed and experimental results are presented for validation. [ABSTRACT FROM AUTHOR]

This paper proposes the predictive control with the discrete space-vector modulation (DSVM) for Vienna rectifier connecting to the permanent magnet synchronous generator (PMSG) of the wind turbine system (WTS). Since Vienna rectifier has the special operation principle, Vienna rectifier generates only the feasible eight voltage vectors, which can be a candidate vector for the predictive control, depending on the sign of the input currents. In the proposed predictive control, the feasible voltage vectors are extended from 8 to 19 consisting the 8 original voltage vectors and 11 virtual voltage vectors by using the DSVM for improving the current quality related to the torque ripple, vibration, and noise, and the neutral-point voltage balance with low voltage ripple is guaranteed by using the offset value calculated based on the model of two dc-link capacitors in Vienna rectifier. The scheme for reducing calculation burden is applied in selecting the candidate vector. In addition, the limited operation range for the maximum torque per ampere control of PMSG connected to Vienna rectifier is analyzed. The performance of the proposed predictive control with DSVM for Vienna rectifier with PMSGs is verified in simulation and experiment. [ABSTRACT FROM AUTHOR]

The integration of switched-capacitor techniques into multilevel inverters (MLIs) with a dc source string contributes to the boosting of voltage gain, renders it particularly attractive in reducing the number of input dc sources in the series string. However, the recent two-stage MLI topologies suffer from high voltage stress across the backend H-bridge. Addressing this concern, an improved topology, namely the one-switched-capacitor integrated MLI (1SCI-MLI) is proposed in this paper. An extended topology of 1SC-MLI is also established by appropriate incorporation of another switched-capacitor circuit. The two proposed topologies are endowed with voltage boosting capability. They also feature low switch count and low number of dc sources. More importantly, they resolve the high voltage stress problem in the existing counterparts. Their corresponding operational analysis and comparisons with recent MLI topologies are discussed. Simulation and experimental results from a laboratory prototype are presented to validate the effectiveness of the proposed topologies. [ABSTRACT FROM AUTHOR]

The conventional three-level active-neutral-point-clamped (ANPC) inverter requires high dc-link voltage at least twice the peak of ac output. To reduce the dc-link voltage, a recent topology that enhanced the voltage gain from half to unity has been presented. In this letter, an alternative ANPC topology is established by using two T-type inverters. Two floating capacitors with self-voltage balancing capability are integrated to achieve a voltage-boosting gain of 1.5. In addition, the proposed topology is capable of generating seven voltage levels. Its operation is validated through circuit analysis followed by experimental results of a prototype. [ABSTRACT FROM AUTHOR]

The nongenerative-boost type rectifier, which is called the Vienna rectifier, is advantageous in terms of efficiency and current total harmonic distortion. Therefore, the Vienna rectifier is used in grid-connected applications such as telecommunication systems and wind turbine systems. Owing to the structural characteristics of the Vienna rectifier, various switching methods exist. Among these methods, a carrier-based discontinuous pulse-width modulation (CB-DPWM) method guarantees high efficiency compared to continuous pulse-width modulation methods; moreover, it is simple compared to a DPWM method based on space vectors. In this paper, the performance of the CB-DPWM method, its applicable region depending on the power factor and modulation index (Ma ), and its efficiency are analyzed in detail. Then, based on the analysis, a neutral-point voltage balancing method for the CB-DPWM method is proposed. The effectiveness and performance of the proposed neutral-point voltage balancing method are verified by simulation and experiment. [ABSTRACT FROM AUTHOR]

A three-level converter is used as the power converters of wind turbine systems because of their advantages such as low-current total harmonic distortion, high efficiency, and low collector–emitter voltage. Interior permanent magnet synchronous generators (IPMSGs) have been chosen as the generator in wind turbine systems owing to their advantages of size and efficiency. In wind turbine systems consisting of the three-level converter and the IPMSG, fault-tolerant controls for an open-circuit fault of switches should be implemented to improve reliability. This paper focuses on the open-circuit fault of outer switches (Sx1 and Sx4) in three-level rectifiers (both neutral-point clamped and T-type) that are connected to the IPMSG. In addition, the effects of Sx1 and Sx4 open-circuit faults are analyzed, and based on this analysis, a tolerant control is proposed. The proposed tolerant control maintains normal operation with sinusoidal currents under the open-circuit fault of outer switches by adding a compensation value to the reference voltages. The effectiveness and performance of the proposed tolerant control are verified by simulation and experiment. [ABSTRACT FROM AUTHOR]

The purpose of neutral-point voltage balancing algorithms in the three-level neutral-point clamped (3L-NPC) topology is to eliminate the voltage unbalance of top- and bottom-side dc-link voltages (neutral-point voltage). These algorithms are divided into dc unbalance and ac unbalance compensation methods. The dc unbalance causes distortion of output currents; therefore, this problem has to be solved. The ac unbalance implies that there is an ac ripple in the top- and bottom-side dc-link voltages. In applications using 3L-NPC topology, a large dc-link capacitor value is required to mitigate this ac unbalance problem. As a result, the size and the cost of applications become large and expensive. In this paper, a compensation method for mitigating the ac unbalance of the neutral-point voltage is proposed, which causes the dc-link capacitor value to be small, when a carrier-based pulse width modulation method is applied. The proposed method compensates the ac unbalance of the neutral-point voltage by adding an optimal compensation value to the reference duty signals. This compensation value is calculated simply by currents and reference duty signals. The calculation process of the optimal compensation value is discussed, and the effectiveness of the proposed method is verified with simulations and experiments. [ABSTRACT FROM PUBLISHER]

The Vienna rectifier, which is a nongenerative-boost type rectifier, is used in many applications such as telecommunication systems and wind turbine systems. The Vienna rectifier has a special operating requirement. Many switching methods considering this requirement were proposed. These methods generally take into account the Vienna rectifier's operation with the unity power factor because the Vienna rectifier aims to provide the power to the load. However, as the applications for the Vienna rectifier are diversified, control requirements have been suggested, including the dc-link voltage balance control and the novel control under severely unbalanced grids. In this paper, we propose a carrier-based pulse-width modulation (CB-PWM) method for Vienna rectifier operation with a variable power factor. The proposed CB-PWM method adds the compensation voltage to the three-phase reference voltages, depending on the power factor, to maintain the sinusoidal input currents of the Vienna rectifier. The performance and effectiveness of the proposed CB-PWM method are verified by simulation and experiment. [ABSTRACT FROM AUTHOR]

Three-level topologies are widely used in back-to-back converters of wind turbine generation (WTG) systems. In comparison with a conventional two-level topology, three-level topologies have more advantages, particularly for the high power. Neutral-point clamped (NPC) and T-type are typical three-level topologies. An open-switch fault of a three-level rectifier that is connected to a permanent-magnet synchronous generator (PMSG) leads to the current distortion and torque vibration in WTG systems. Furthermore, WTG systems can break down in the worst case. Therefore, a tolerance control for open-switch faults is required to improve the reliability of WTG systems. WTG systems by applying the tolerance control can be stopped safely and prevent additional problems. Depending on the situation, it can keep the operation of WTG systems under open-switch fault. The effects of outer open-switch faults of three-level rectifiers are analyzed by considering PMSG specifications in this paper. Moreover, a tolerance control for outer open-switch faults of the NPC and T-type three-level rectifiers are proposed with existing tolerance controls for inner open-switch faults. The proposed tolerance control is to inject the exact $d$-axis current value to eliminate current distortion. The simulation and experiment are conducted to prove the feasibility of the proposed tolerance control and to identify its performance. [ABSTRACT FROM PUBLISHER]

In wind turbine generation (WTG) systems, a back-to-back converter with a neutral-point-clamped (NPC) topology is widely used because this topology has more advantages than a conventional two-level topology, particularly when operating at high power. There are 12 switches in the NPC topology. An open-switch fault in the NPC rectifier of the back-to-back converter leads to the distortion of the input current and torque vibration in the system. Additionally, an open-switch fault in the NPC inverter of the back-to-back converter causes the distortion of the output current. Furthermore, the WTG system can break down in the worst case scenario. To improve the reliability of WTG systems, an open-switch fault detection method for back-to-back converters using the NPC topology is required. This study analyzes effects of inner and outer open-switch faults of the NPC rectifier and inverter and describes a novel open-switch fault detection method for all possible open-switch faults in the back-to-back converter. [ABSTRACT FROM AUTHOR]

Multilevel converter topologies are widely used in applications of wide-power range. The T-type topology, which is one of many three-level topologies, has an advantage in terms of efficiency compared to the neutral-point-clamped (NPC) type. In applications using the T-type topology, interest in reliability has been increased recently. Therefore, the open-switch fault detection method and tolerance control for T-type rectifiers, which are different from those of T-type inverters, are necessary to improve the reliability of applications. When the open-switch fault of switches connected to a neutral point occurs, an NPC-type rectifier cannot restore distorted input currents; however, a T-type rectifier is able to eliminate input current distortion completely. In this paper, an open-switch fault detection method is proposed and can find a position of the open-switch fault. Moreover, two tolerance controls based on space vector modulation are proposed and their characteristics are analyzed. The effectiveness and performance of the proposed open-switch fault detection method and two tolerance controls are verified by simulations and experiments. [ABSTRACT FROM PUBLISHER]

Open- and short-circuit faults are the most severe issues that affect the stability and reliability of power conversion systems. The space vector modulation (SVM) technique is widely used to control power converters. However, conventional SVM is incapable of controlling the system effectively when such faults occur. Considering these, this article proposes a modified SVM that is capable of tolerating the extreme cases of faults (including multi open-/short-circuit faults) simultaneously. An innovative fault tolerance method is proposed to tolerate multifaults in hybrid active neutral point converters (HANPCs). Furthermore, new voltage reference signals are created in addition to calculating voltage offset and inserting modified switching sequences. A descriptive performance analysis of the modified SVM technique is applied under healthy and faulty conditions. Correspondingly, the effects of the total harmonic distortion of the system performance are also highlighted and explained. The results reveal that the proposed control strategy can effectively maintain healthy and safe operation under faulty conditions without the need for additional parts or alteration of the topology configuration. In addition, the proposed method can be applied to HANPCs without special requirements to withstand high voltage levels. The effectiveness of the proposed method is verified by simulation and experimental results. [ABSTRACT FROM AUTHOR]

This article proposes a method to eliminate abnormal output voltages generated in three-level hybrid active neutral-point clamped (ANPC) inverters. The hybrid ANPC inverter is a topology in which silicon (Si) devices are replaced with silicon-carbide (SiC) devices in part from the conventional ANPC topology. The hybrid ANPC inverters have the advantages of high switching frequency and low power switching loss due to the SiC devices. In this hybrid ANPC inverter, abnormal output voltages occur when the polarity of the output pole voltage is changed from positive to negative. The cause of the abnormal voltages is the switching time difference between the Si and SiC devices, and it is various from a few nanoseconds to a few microseconds. These abnormal output voltages need to be eliminated as it leads to degraded output power quality in the hybrid ANPC inverters. The proposed switching method effectively eliminates the abnormal output voltages and reduces output current distortion. The performance of the proposed method is verified using a prototype of the new three-level hybrid ANPC inverter type through both simulations and experiments. [ABSTRACT FROM AUTHOR]

Conventional active-neutral-point-clamped (ANPC) inverters exhibit low voltage gain that inherently leads to a high dc-link voltage requirement. An improved ANPC inverter that is capable of generating five voltage levels has recently reduced the dc-link voltage twofold to achieve unity gain. This led to the development of a single-stage dc–ac power converter with no frontend boost dc–dc converter. This article proposes novel ANPC inverters capable of unity or boosted voltage gain while generating higher voltage levels. The first topology can provide a voltage gain of 1.5 and extends the number of levels to seven by incorporating only one additional switch. The topology can also be extended by adding three switches and one floating capacitor to generate nine levels with unity voltage gain, or 11 levels with a voltage gain of 2.5. The proposed ANPC inverters and their operations are comprehensively discussed. Experimental results are provided to validate the feasibility of the proposed ANPC inverters. [ABSTRACT FROM AUTHOR]

To increase the fault tolerance for cascaded H-bridge multilevel inverters (CHMIs) based on level-shifted pulse width modulation (LS-PWM), a modified LS-PWM method is proposed for the inverters operating under faulty conditions. To cover both open- and short-device fault cases, two types of switching scheme are included in this PWM method. With this PWM method, the neutral shift can be applied as fault-tolerant control for CHMIs based on LS-PWM. Finally, three-phase-balanced line-to-line voltages and currents with minimum harmonic distortion are produced for the inverter with disabled power cells. In addition, this LS-PWM method has the capability to improve power distribution among the H-bridge power cells under the faulty conditions. Simulation and experimental results show that the proposed PWM method performs satisfactorily to achieve fault tolerance. [ABSTRACT FROM AUTHOR]

A new pulsewidth modulation (PWM) strategy which is an alternative approach of the discontinuous PWM (DPWM) for a three-level neutral-point-clamped (NPC) inverter is proposed in this paper. A three-level NPC inverter is completely mature and very well-established topology in high-power applications. However, the three-level NPC inverter has an inheritance problem of the neutral-point voltage unbalancing due to the split dc-link capacitors. This structure can cause large neutral-point voltage ripple. Furthermore, output currents of the three-level NPC inverter are distorted by the neutral-point voltage ripple. Therefore, the neutral-point voltage must be controlled. In this paper, a new DPWM method using two different offsets for the neutral-point ripple reduction is proposed and the effectiveness of the proposed DPWM method is verified by using the simulation and the experimental results. [ABSTRACT FROM PUBLISHER]

Multilevel rectifier topologies are commonly used in wide-power range applications. The T-type rectifier topology, which is a three-level topology, has an advantage in terms of efficiency compared to a neutral-point clamped (NPC)-type topology. In applications using the T-type rectifier topology, improving reliability has gained increased attention recently. A tolerance control for T-type rectifiers is necessary to improve the reliability of applications. When an open fault of switches connected to the neutral-point occurs, the NPC-type rectifier cannot restore distorted input currents, on the other hand, the T-type rectifier can eliminate the input current distortion completely. In this paper, we report two studies: 1) a three-level switching-oriented tolerance control, which is advantageous in terms of efficiency, for the Sx2 and Sx3 open-switch faults of the T-type rectifier and 2) comparison of the proposed tolerance control with two existing tolerance controls. In particular, the current total harmonic distortion, dc-link voltage ripple, and switch losses of these tolerance controls are analyzed by using simulation and experimental results. [ABSTRACT FROM AUTHOR]

The centralized topology with three-level inverters are widely used in photovoltaic (PV) systems due to their less installation costs and complexity. However, the common maximum power point tracking (MPPT) is a disadvantage of the centralized topology particularly under the partial shading and panel mismatch conditions. In this system, if PV modules are separately connected to the split capacitor voltage, the MPPT efficiency can be improved by the proposed control strategy. By the proposed method, the two capacitor voltages can be controlled asymmetrically to perform the separate MPPTs of each PV module connected to separate capacitors. The outputs can be generated without distortion even if two capacitors are asymmetrically regulated. Simulation and experimental results verify the validity and feasibility of the proposed methods. [ABSTRACT FROM PUBLISHER]

The emerging switched-capacitor-based multilevel inverters offer interesting merits such as self-balancing of capacitor voltages and boosting of voltage gain. While the switched capacitors (SCs) in these topologies are charged in parallel with the dc source, severe current spikes issue is inevitable, rendering them impractical at high power. This article proposes a novel switched-capacitor-based T-type inverter that mitigates the current spikes by enabling soft charging for its integrated SCs, where both SC in the topological structure charges through a dedicated circuit comprises of an inductor and two switches. The proposed topology is capable of five-level ac voltage generation and when compared to a classical T-type/ANPC (active neutral-point-clamped) inverter, it achieves higher dc-link voltage utilization since its maximum attainable voltage gain is doubled. Theoretical findings of the proposed topology are validated by both the simulation and experimental results. [ABSTRACT FROM AUTHOR]

This article presents a novel cascaded multilevel inverter as an alternative to the cascaded H-bridge (CHB). By adopting two H-bridges integrated with two inductors and two power switches, the proposed topology is able to generate a five-level voltage with merely a single dc source. Voltage-boosting capability is guaranteed despite its single-stage operation. A corresponding modulation technique is also established to charge the boost inductors with a constant duty-cycle while simultaneously generating a five-level ac voltage. Therefore, the proposed topology outperforms the CHB in reducing the isolated dc source count, enhancing the voltage gain, and lowering the dc source voltage magnitude. In addition, the modularity is preserved, where the proposed topology can be extended by cascading multiple modules. The operation and feasibility of the proposed cascaded multilevel inverter is analyzed and validated through simulation and experimental results. [ABSTRACT FROM AUTHOR]

The switched-capacitor-based cascaded multilevel inverters (CMI) have been emerging due to their voltage boosting capability. Unfortunately, they suffer from impulse charging current and nonuniform operation. This article presents a topology termed as dual-T-type five-level CMI to resolve these problems without compromising the desirable voltage boosting characteristic. The main idea is to integrate a half bridge and an inductor to soft charge a capacitor that is connected in series with the dc source. The capacitor enables the voltage gain boosted to two, while the control of eight power switches that constitutes a dual-T structure enables five voltage levels generation. In addition, uniform operation is achieved for cascaded extensions. The operating principle of the proposed topology is analyzed and elaborated. For validation, simulation, and experimental results of a prototype are presented. [ABSTRACT FROM AUTHOR]

This paper proposes a new family of multilevel inverter topology that is able to generate seven voltage levels by utilizing one or two floating capacitors and 10 power switches. This novel boost switched-capacitor seven-level inverter possesses voltage boosting capability with an achievable maximum voltage level 1.5 times the input direct current (dc) voltage. The generation of higher output voltage does not incur high-voltage stress on any power switch in this topology, as the peak inverse voltages of all power switches do not exceed the input source voltage. In addition, capacitor voltage balancing is not essential since the floating capacitors are effectively balanced during the charging and discharging processes. Furthermore, the proposed topology eliminates the need for multiple isolated dc sources, and a single dc source is sufficient in both its single-phase and three-phase topologies. The operating principle and steady-state analysis of the proposed topology are elaborated. Experimental results from a single-phase prototype are then presented to verify the validity of the proposed topology. [ABSTRACT FROM AUTHOR]

A modular multilevel converter (MMC) is regarded as a promising topology in high-voltage direct current systems. However, the MMC consists of numerous submodules (SMs) and switching devices, which lead to a considerable switching loss, and increased cost and size of the heat sink. To mitigate these issues, this paper presents a novel modulation method composed of fundamental frequency modulation (FFM) and multicarrier-based sinusoidal pulsewidth modulation schemes. The main purpose of this modulation method is the reduction of switching loss while maintaining good harmonic performance. However, the FFM scheme leads to the unbalanced capacitor voltage of each SM in the MMC. Accordingly, this paper additionally proposes the rotation method and selective voltage balancing control for SMs to ensure effective performance of the method. Simulation and experimental results verify the effectiveness and performance of the proposed modulation scheme through switching loss and spectral analyses. [ABSTRACT FROM AUTHOR]

This paper presents an optimized switching strategy to reduce the dc-link ripple current for three-level photovoltaic (PV) inverters. The large electrolytic capacitors are commonly used for the dc link of power electronics applications to stabilize the dc-link voltage. The most important factor of designing the dc-link capacitor is the allowable current ripple. The over-ripple current flowing through the capacitor causes a high heat loss, shortened lifespan, low stability, and reliability. The proposed switching scheme selects voltage vectors and reconfigures dwelling order of the vectors to reduce the capacitor ripple current. This switching method is able to extend the lifetime of the dc-link capacitors by simple software programming. In addition, this switching method reduces the common-mode voltage and leakage current that represent high reliability and safety of the system. The effectiveness of the proposed method is verified with simulations and experimental results. [ABSTRACT FROM AUTHOR]

This paper analyzes the combination in a cascaded H-bridge multilevel inverter (CHBI) based on transformers with the different turn ratios for increasing the voltage level and proposes the switching method for achieving the output voltage distribution among H-bridge cells (HBCs). The transformers used in this paper are connected to the output of the respective HBCs, and the secondary sides of all the transformers are connected in series for generating the final output voltage. Only one of the transformers, in particular, has a different turn ratio for increasing the output voltage level. In this paper, the possible turn ratio of the special transformer with a different turn ratio is discussed in detail, and a switching method based on the level-shifted switching method for the topology used in this paper is proposed. To verify the effectiveness of the proposed method, a three-phase 21-level CHBI is experimentally tested. [ABSTRACT FROM PUBLISHER]

This paper underpins the principles for generating reactive power in single-phase transformerless photovoltaic (PV) inverters. Two mainstream and widely adopted PV inverters are explored, i.e., H5 and HERIC. With conventional modulation techniques, reactive power cannot be realized in H5 and HERIC due to the absence of freewheeling path in negative power region. Based on the study, modulation techniques are proposed to provide bidirectional current path during freewheeling period. With proposed modulation technique, reactive power control is achieved in H5 and HERIC inverters, without any modification on the converter structures. The performances of the proposed modulation techniques are studied via MATLAB simulation and further validated with experimental results. [ABSTRACT FROM PUBLISHER]

This paper proposes a generalized scheme of new soft-switching interleaved boost converters that is suitable for high step-up and high-power applications. The proposed converter is configured with proper numbers of series and parallel connected basic cells in order to fulfill the required output voltage and power levels, respectively. This leads to flexibility in device selection resulting in high component availability and easy thermal distribution. Design examples of determining the optimum circuit configuration for given output voltage and power level are presented. Experimental results from a 1.5-kW prototype are provided to validate the proposed concept. [ABSTRACT FROM AUTHOR]