Search

This brief investigates the data-based networked control problem of a class of nonlinear systems, where random network-induced delays and packet dropouts in the feedback and forward channels are considered simultaneously and further treated as random round-trip time (RTT) delays. The main contributions of this brief are as follows: 1) To actively compensate for RTT delays, a novel compensation control scheme is proposed based on the control input design, and thus, only one control command needs to be transmitted to the actuator through the network; 2) an explicit sufficient condition is derived to ensure the stability of the resulting closed-loop system as well as a zero steady-state output error for a constant reference input; and 3) numerical simulation and comparison with existing methods are carried out to show the effectiveness of the proposed method. [ABSTRACT FROM PUBLISHER]

This brief investigates the regulation problem for a class of networked nonlinear systems with measurement noise, where random data dropouts in both the feedback and forward channels are considered. To actively compensate for the two-channel data dropouts, a data-driven networked compensation control method is proposed, which consists of two aspects: 1) to calculate a control increment based on the measured output error in the controller and 2) to design a data dropout compensation strategy based on the latest control increment available in the actuator. The proposed method merely depends on the input and output data of the controlled plant, without using explicit or implicit information of its mathematical model. Moreover, only one control command needs to be transmitted in the forward channel at each time instant. A sufficient condition is derived to guarantee the closed-loop stability and output error convergence. Both numerical simulations and experimental tests are conducted to demonstrate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

This paper focuses on the fault-tolerant control problem for an Internet-based three-tank system in the presence of possible sensor bias faults. The Internet-based three-tank system is an experimental setup that can be regarded as a typical networked system for evaluating networked fault-diagnosis and fault-tolerant control methods. Packet dropout phenomenon in the sensor-to-controller link is considered in this paper, and the fault type we deal with is chosen as the sensor bias fault. Fault-diagnosis unit is designed toward an auxiliary system. Sensor bias faults can be detected by comparing the residual signal generated by the fault detection filter and a prescribed threshold. After that, the fault can be isolated by using the residual analysis approach. Once the fault is isolated, it can be estimated iteratively in the least-squares sense. A fault accommodation method is proposed, and a fault-tolerant control strategy is achieved based on the fault information provided by the fault-diagnosis unit. The approach brought forward in this paper is demonstrated via an experimental study on the practical Internet-based three-tank system. Results show the effectiveness and the applicability of the proposed techniques. [ABSTRACT FROM PUBLISHER]

This paper is concerned with the design and performance analysis of networked control systems with network-induced delay, packet disorder, and packet dropout. Based on the incremental form of the plant input–output model and an incremental error feedback control strategy, an incremental networked predictive control (INPC) scheme is proposed to actively compensate for the round-trip time delay resulting from the above communication constraints. The output tracking performance and closed-loop stability of the resulting INPC system are considered for two cases: 1) plant-model match case and 2) plant-model mismatch case. For the former case, the INPC system can achieve the same output tracking performance and closed-loop stability as those of the corresponding local control system. For the latter case, a sufficient condition for the stability of the closed-loop INPC system is derived using the switched system theory. Furthermore, for both cases, the INPC system can achieve a zero steady-state output tracking error for step commands. Finally, both numerical simulations and practical experiments on an Internet-based servo motor system illustrate the effectiveness of the proposed method. [ABSTRACT FROM PUBLISHER]

This paper addresses the design problem of false data injection (FDI) attacks against the output tracking control of networked systems, where the network-induced delays in the feedback and forward channels are considered. The main contributions of this paper are as follows. 1) To actively compensate for the two-channel network-induced delays, a Kalman filter-based networked predictive control scheme is designed for stochastic linear discrete-time systems. 2) From an attacker’s perspective, stealthy FDI attacks are proposed for both the feedback and forward channels so as to disrupt the stability of the resulting closed-loop system while avoiding the detection of a Kalman filter-based attack detector. 3) Both numerical simulations and practical experiments are carried out to show the effectiveness of the proposed method. [ABSTRACT FROM PUBLISHER]

This paper addresses the data-based networked control problem for a class of nonlinear systems. Network communication constraints, such as network-induced delay, packet disorder, and packet dropout in both the feedback and forward channels, are considered and further treated as the round-trip time (RTT) delay that is redefined. By using the packet-based transmission mechanism and the model-free adaptive control algorithm, a data-based networked predictive control method is proposed to actively compensate for the random RTT delay. The proposed method does not require any information on the plant model and depends only on the input and output data of the plant. A simple and explicit sufficient condition, which is related to the upper bound of the RTT delays, is derived for the stability of the closed-loop system. Additionally, a zero steady-state output tracking error can be achieved for a step reference input. The effectiveness of the proposed method is demonstrated via simulation and experimental results. [ABSTRACT FROM PUBLISHER]

This paper studies the problem of output tracking for networked control systems with network-induced delay, packet disorder, and packet dropout. The round-trip time (RTT) delay is redefined to describe these communication constraints in a unified way. By including the output tracking error as an additional state, the output tracking problem is converted into the stabilization problem of an augmented system. Based on the observer of the original state increment and the feedback of the output tracking error, a model-based networked predictive output tracking control (NPOTC) scheme is proposed to actively compensate for the random RTT delay. The closed-loop stability is proved to be independent of the RTT delay, and the separation principle for the design of the observer-based state feedback controller is still held in the NPOTC system. A two-stage controller design procedure is presented, which not only guarantees the stability of the closed-loop NPOTC system but also achieves the same output tracking performance as that of the local control system for time-varying reference signals. Both numerical simulations and practical experiments on an Internet-based servo motor system illustrate the effectiveness of the proposed method. [ABSTRACT FROM PUBLISHER]