Search

The motion of cathode spots plays a crucial important role in removing oxide layer on a metal surface by vacuum arc. In this paper, the characteristics of the motion of a single cathode spot on metal surface with oxide layer are investigated experimentally. Experiments are conducted in a detachable vacuum chamber. A hollow copper anode with a hole of 10~\text mm \times 10 mm is used in order to observe the 2-D motion of the cathode spot. The motion of the cathode spot during the descaling process is photographed by a high-speed digital camera with an exposure time of 2~\mu \texts . Experimental results indicate that there are slow motion and fast motion of the cathode spot during descaling process, and the slow motion is the basic characteristic in most of the descaling time. The probability distribution of the cathode spot’s displacement and resident time, the average velocity, and the movement parameter S^2/t are analyzed quantitatively. The results indicate that with the increase of gap distance or the decrease of oxide layer thickness, the cathode spot becomes more active. [ABSTRACT FROM PUBLISHER]

Removing an oxide layer on a metal surface by vacuum arc has been preliminarily used in the metallurgical industry as an environment-friendly substitutor for the traditional acid-washing technique. In this paper, the influence of protection gas pressure on descaling process is investigated experimentally. Arc images taken by a high-speed digital camera indicated that the descaling rate was closely related to the motion pattern of cathode spots in different gas pressures. The decrease of descaling rate with the increase of gas pressure could be partly attributed to the formation of cathode-spot group and its less mobility at high gas pressure. The influence of gas pressure on the power density of cathode spot was also analyzed. It seemed that higher gas pressure would lead to the decrease of the ratio of power input into the cathode spot to the total arc power, which could also contribute to the decrease of the descaling rate. [ABSTRACT FROM PUBLISHER]

Experiments on a drawn vacuum arc with forced current zero, which was formed by injection of a countercurrent with a frequency of 1 kHz, were conducted in a detachable vacuum chamber. The prospective peak main current was 3.5 kA. Arc characteristics were investigated with the aid of a high-speed digital camera with an exposure time of 2 \mu\s. In this paper, the influence of axial magnetic field (AMF) distribution and anode material on the evolution of vacuum arc in the initial expanding stage is mainly investigated. Three types of electrodes were used in the experiments. One of them was simple electrodes with butt contact plates, and the other two types were specially designed electrodes generating a conventional bell-shaped AMF profile and a saddle-shaped AMF distribution, respectively. OFHC copper and WCu10 were used as anodes for the electrodes with bell-shaped AMF. The appearance of vacuum arc in the forced current-zero stage is also investigated. [ABSTRACT FROM AUTHOR]

Anode material seriously influences the characteristics of vacuum arc and further affects the performance of medium-voltage vacuum switches when the interruption current is high. There are many materials used for electrode manufacture, and different materials are selected for different switches. For a pure metal, its performance usually cannot satisfy the actual requirement. To improve switch’s performance, an alloy is usually used as an electrode material. In this paper, thermal processes of six kinds of metal anodes (including pure metal and alloy anodes) are simulated and researched. The physical parameters of the pure metals all come from experiment results directly or are fitted by the experimental data. The physical parameters of the CuCr alloys are derived from Cu and Cr parameters. Two kinds of temperature calculation methods are used, which are called melting and solidification model and equivalent specific heat method, respectively. Simulation results show that W and Mo anodes have the higher temperature than Cu, Cr, CuCr25, and CuCr50 anodes. A pure Cr anode has the largest melting width and highest saturated vapor pressure and evaporation energy. A Cu anode has the biggest melting depth. A W anode has the smallest melting width and depth. Axial temperature gradient is related to the thermal conductivity, and the Cr anode has the largest axial temperature gradient. The thermal characteristics of CuCr25 and CuCr50 anodes are located between the pure Cu and Cr anodes. There are two melting points appearing in the results of CuCr alloys, and between the two melting points, the alloy anodes are in solid–liquid mixture state. [ABSTRACT FROM PUBLISHER]

Based on a steady-state 3-D magnetohydrodynamic (MHD) model, the high-current vacuum arc (HCVA) under combined effect of actual magnetic field (MF) and external transverse MF (ETMF) is simulated. The actual MF is generated by cup-type axial magnetic field contact system commonly used in commercial vacuum circuit breakers. The ETMF may cause the deflection of arc column, which is the main reason of the contact deflected erosion. According to some experimental results, the electron temperature in HCVA is assumed to be uniform and equal to 3 eV. Therefore, the MHD model is simplified by neglecting the electron energy equation to improve the simulation efficiency. With the three conservation equations (mass, momentum, and energy) of ion flow coupling solved, the spatial distributions of some flow parameters can be obtained. The influence of all three components of the MF is inserted by solving the magnetic transport equations sequentially. Proper boundary conditions are set on the cathode and anode side, which separated the cathode spots mixing region and anode sheath region from computation domain, respectively. Under the influence of the ETMF, the deflection of the plasma flow can be predicted, which may be helpful to understand the mechanism of the contact deflected erosion. [ABSTRACT FROM PUBLISHER]

In this paper, high-current vacuum arc (VA) breaking experiments in vacuum interrupters were conducted using two kinds of high-capacity (larger diameter) axial magnetic field (AMF) electrodes with contact gap distance changing from 10 to 40 mm. Triggering arc mode and fixed gap distance were adopted. Experimental results showed that during the initial diffusion stage, the arc voltage of high-current VA got a peak value. The change in high-current VA appearance would also affect the curve of arc voltage. With the increase of contact gap distance, the voltage of high-current VA increased and the VA near the anode appeared contracted, and its shape was changed from cylinder to cone. In the shorter gap distance, for cup electrodes, the plasma jets mix with each other and the arc column appears like a bright cone, whereas for coil electrodes, the plasma jets are clear and the column appears like a cylinder, and the transfer of arc appearance affects arc voltage distribution. Moreover, arc twist and rotation often occur under longer gap and higher current, which is due to the larger radial magnetic field component generated by AMF coils, and arc voltage appeared high-frequency and high-amplitude noise, and ultimately resulted in the distortion of the arc current in the current experimental conditions (lower charging voltage of capacitor). [ABSTRACT FROM PUBLISHER]

In this paper, a transient 3-D model of the anode activity in a high-current vacuum arc (HCVA) was established. The melting, flow, evaporation, and solidification of the anode material were included in this model. Based on this model, the thermal and flow process of the anode in an HCVA under axial magnetic fields was simulated and analyzed. Simulation results showed that the maximum anode temperature appeared near 7 ms. The maximum rotational velocity and melting radius appeared near 9 ms. This meant that the anode was still in the melting, flow, and evaporation status near current zero moment, which was easier to cause reignition of vacuum interruption. Through 3-D modeling and simulation, a more visualized anode process can be understood. In the future, unsymmetrical anode phenomena will be researched and analyzed by this 3-D model. [ABSTRACT FROM PUBLISHER]

Based on a 2-D magnetohydrodynamic model, high-current vacuum arcs (HCVAs) under axial magnetic fields (AMFs) with consideration of current density distribution at the cathode are simulated and analyzed. The current density distribution at the cathode used in the simulation is obtained by processing the image of cathode spots from experiments. In order to study the influence of current density distribution at the cathode on vacuum arc characteristics, HCVA is simulated under two kinds of current density distribution at the cathode. Then, for HCVA simulation in a half-sinusoidal period, the current density distribution at the cathode and the AMF delay are both taken into account. The simulation results show that the nonuniform current density at the cathode makes the values of the arc plasma parameters in the interelectrode region larger and their radial distribution more nonuniform than the uniform current density at the cathode. The more uniform current density at the cathode and the stronger AMF at the moments in the second 1/4 cycle make the values of the arc plasma parameters in the central region smaller and their radial distribution broader than those in the first 1/4 cycle. In addition, the simulation results will also be compared with the experimental results. [ABSTRACT FROM AUTHOR]

Based on a 3-D steady magnetohydrodynamic model, the high current vacuum arc subjected to a realistic spatial magnetic field generated by the cup-type contacts was simulated. The influence of the realistic spatial magnetic field profile on plasma's rotation behavior was analyzed. The distribution of the azimuthal velocity on anode side under realistic spatial magnetic field profile was quite different from that under uniform axial magnetic field. [ABSTRACT FROM PUBLISHER]

The anode melting in high-current vacuum arcs leads to the increase of metal vapor and liquid droplets around current zero and even the interruption failure. In our recent experiments of the cup-shaped axial magnetic field (AMF) contacts, an obvious clockwise swirl flow of the liquid copper was detected on the anode surface. However, if an additional external AMF which is reverse to the AMF generated by the contacts was introduced, the rotation direction of the liquid copper swirl flow on the anode surface could reverse to anticlockwise. These phenomena indicate that AMF has great influence on the performance of anode melting and its swirl flow. [ABSTRACT FROM AUTHOR]