Search

In this article, a high-isolation power divider with ultrawideband characteristics for simultaneous operation in two adjacent bands is proposed. The power divider is developed based on a four-port coplanar Magic-T. The difference port of the Magic-T consists of a double-ridge gap waveguide (RGW) that supports quasi-TEM mode transmission, which provides the benefit of its broadband characteristics and allows for facilitated assembly. In addition, an inline microstrip line (MSL) containing a probe is inserted into the opposite side of the difference port to form the sum port. This basic configuration has actually achieved high isolation between the output arms and low return loss at each port, and however, its isolation bandwidth is limited by the narrowband matching of the sum port. To overcome this difficulty, a three-port microstrip T-junction is connected in series to the sum port of the Magic-T, resulting in a five-port 3-dB power divider with a wide isolation bandwidth. The process of considering this solution is analyzed and explained in detail in this article and the corresponding simulations and experimental verifications are performed. According to the obtained results, the proposed power divider has excellent overall performance, in particular low loss, ultrawideband, high isolation, and good amplitude/phase consistency. [ABSTRACT FROM AUTHOR]

Highly oversized mode converters are the critical devices for high power millimeter-wave transmission systems, characterizing high power capacity and low loss. In order to improve the conversion efficiency from TE01 to TE11 mode, the mode coupling mechanism of oversized elliptical waveguides is explored, and an optimal ellipticity interval to obtain the high conversion efficiency is deduced by analyzing the mode coupling capacity. Considering that ellipticity can affect the power capacity, breakdown thresholds of different operating modes in elliptical waveguides are studied. Based on the analyses, a synthesis method to design the elliptical mode converter integrating the mode conversion efficiency and the power capacity is proposed. A highly oversized mode converter working in $W$ -band is designed, and the simulation results demonstrate that the mode converter achieves the high conversion efficiency over 95% in a relative bandwidth of 19.6%. In order to validate the design, a prototype of the mode converter is fabricated, and the high purity of outputted TE11 mode is verified by the measurement. The oversized mode converter designed by the proposed synthesis method features high efficiency, broad bandwidth, and high power capacity, enabling its full utilization of the potential of gyrotron traveling-wave tubes (gyro-TWTs). [ABSTRACT FROM AUTHOR]

This article proposes a method to excite the TM11 mode in circular waveguides. The principle of synthesizing a circular TM mode is deduced based on the electric dipole moment theory first, and the output mode and its purity are analyzed theoretically. Then, a mode conversion scheme to convert the rectangular TE10 into circular TM11 mode via a pair of out-of-phase quasi-TEM mode is proposed. In order to achieve the broadband excitation in a compact size, the ridge gap waveguide is used as a medium between the rectangular and cylindrical waveguide. Simulation results present that the proposed exciter has a propagation bandwidth up to 10 GHz in Ka-band with a mode purity over 98%. A prototype is manufactured and measured, and the presence of TM11 mode and the mode purity are confirmed by a port radiation pattern measurement. The mode exciter features high mode purity, broad bandwidth, and a compact size, which provides a low-power generator for the research of novel gyrobackward-wave devices and devices in the high-power transmission line. [ABSTRACT FROM AUTHOR]

This article introduces a new type of contact-less electromagnetic bandgap (EBG) structure in the form of an embedded bed of nails. Compared with the traditional bed of nails structure, the smooth upper metal plate originally used to provide the perfect electrical conductor (PEC) boundary is replaced by periodic defect grooves, and the metal pins on the base block are embedded in these grooves without any electric contact. One of the advantages of the embedded EBG structure is that it has a robust tolerance for the height of the air gap. Therefore, this structure provides a cost-effective parallel plate mode suppression solution because it allows a low-precision manufacturing process level while maintaining the stability of the bandwidth. On the other hand, the proposed EBG structure can achieve a stopband range of several octaves. This characteristic makes it indeed suitable for wideband gap waveguides (GWs) to provide horizontal open boundaries. To verify the feasibility of the proposed approach, the new ridge gap waveguide (RGW) (with an embedded bed of nails) and the classic RGW (with a traditional bed of nails) with two 90° bends are designed, fabricated, measured, and compared. The experimental and simulation results are quite consistent and indicate that the embedded RGW has prominent advantages in bandwidth and robustness. [ABSTRACT FROM AUTHOR]

A broadband dielectric window with high power handling capability for gyrotron traveling wave tubes (gyro-TWTs) had been designed based on the step-type impedance transition structure. The manufactured beryllium oxide (BeO) window can achieve a relative bandwidth of 35.3% with a maximum reflection of −20 dB in the ${X}$ -band, and the corresponding transmission loss is over −0.1 dB. The resonant spikes caused by engineering factors, including assembly tilt and gap, are investigated and analyzed. Thermal analysis shows that the BeO window can achieve a high average/CW power handling capability of over 232 kW within a wide frequency range. The fabricated input window has been successfully applied in our ${X}$ -band broadband and high-power gyro-TWT. [ABSTRACT FROM AUTHOR]

To meet the need to transmit increasingly massive volumes of data, a more than 3 kW continuous wave (CW) Ka-band sheet beam traveling-wave tube (SB-TWT) is reported for the first time. Working under unsaturated drive, the maximum gain obtained is 29 dB with a sheet beam of 30.9 kV, 0.82 A, and the efficiency exceeds 24% with a single-stage collector depressed to −15 kV. The 1-dB bandwidth reaches 6 GHz from 26 GHz to 32 GHz and the bandwidth with output power greater than 2 kW can even reach 7GHz from 26 GHz to 33 GHz. The realization of 99.8% static transmission as well as over 97% actual CW transmission of sheet beam is verified successfully, which benefits from adopting periodic cusp magnet (PCM) focusing, and thereby total weight is less than 15 kg. The relevant experimental details are introduced in this letter. [ABSTRACT FROM AUTHOR]

This letter proposes an inline, ultrawideband, and low loss transition from microstrip line (MSL) to ridge gap waveguide (RGW). An efficient conversion between operational mode of RGW and the quasi-TEM mode of MSL is presented by using suspended line patch as a bridge. Furthermore, the effect of loading a capacitive iris on the transition matching performance is studied and a methodology to tune the transition bandwidth is proposed. In order to validate the presented solution, a back-to-back transition prototype is developed and investigated experimentally. The measured results show an insertion and return loss of 0.4 and 15 dB, respectively, over 107% relative bandwidth in the range of 6.2–20.1 GHz. [ABSTRACT FROM AUTHOR]

This article proposes a synthesis method based on phase modulation to design broadband oversized smooth-walled horns for high-power millimeter-wave applications. The bandwidth of oversized smooth-walled horn is confined by the mismatch of the relative phase between TE11 mode and TM11 mode. By analyzing the mode conversion along horn, it is found that the phase of the generated TM11 mode can be influenced by the TE11 mode. Therefore, the synthesis method uses a slow waveguide taper, in which the generated TM11 mode is in a small fraction and its phase is efficiently influenced by TE11 mode, to modulate the relative phase of TE11 mode and TM11 mode. Using the proposed method, an oversized smooth-walled horn is designed, of which the phase mismatch is ±10° in the range of 32–38 GHz. The simulation results show that the proposed horn has a highly symmetric far-field pattern with a peak gain greater than 28 dBi in the range of 32–38 GHz and the sidelobe level has −19 dB decline compared with the peak gain. A prototype is fabricated and the near-field pattern measurement is carried out. The high correspondence of the simulated near-field patterns with the measured ones proves that the proposed method is an appropriate option to design broadband feed horns for high-power millimeter wave. [ABSTRACT FROM AUTHOR]

In this paper, converters of TE $^{\Box }_{{10}}$ –TE $^{\circ }_{{21}}$ mode and TE $^{\Box }_{{10}}$ –TE $^{\circ }_{{01}}$ mode with similar exciting topologic structures are designed and verified for a cold test of gyro-TWT. Both the proposed converters are composed of three sections, including TE $^{\Box }_{{10}}$ to TE $^{\Box }_{{20}}$ mode converter with ridged twist waveguide, TE $^{\Box }_{{20}}$ to TE+22 mode converter with variable cross-shaped waveguide, and the last section TE+22 to TE $^{\circ }_{{21}}$ or TE $^{\circ }_{{01}}$ mode converter ($^{\Box }$ represents the rectangular waveguide, + represents the cross-shaped waveguide, and ° represents the circular waveguide). The mode converters can be designed step-by-step and exhibit excellent wideband performance and high conversion efficiency. Simulation results reveal that the proposed TE $^{\circ }_{{21}}$ mode and TE $^{\circ }_{{01}}$ mode converters have less than 0.04 and 0.03 dB loss over 13.5- and 12-GHz bandwidths, respectively, while the return loss is below −25 dB. Prototype TE $^{\circ }_{{21}}$ and TE $^{\circ }_{{01}}$ mode converters were fabricated and back-to-back millimeter-wave measurements were performed to verify the design. [ABSTRACT FROM AUTHOR]

The design and experiment of a high power and broadband Ku-band gyrotron traveling-wave tube (gyro-TWT) amplifier operating in the TE11 mode are presented in this paper. A new-type broadband rotating TE11 mode input coupler is applied to excite operating mode and a broadband three-disk beryllium oxide ceramic output window is used in the designed gyro-TWT. In order to suppress the potential oscillations, expand working bandwidth, and improve the heat dissipation capability of high frequency system, a periodic beryllium oxide and silicon carbide composite lossy ceramic rings loaded high-frequency circuit with a nonlinear small change output taper is adopted in the gyro-TWT. When the beam voltage is 70 kV and the beam current is 12 A, the experiment of this Ku-band gyro-TWT developed shows that the measured maximum output average power is ~20 kW at the frequency 16 GHz, corresponding to a maximum output pulse power of ~200 kW (10% duty ratio), a gain of 43.0 dB and a maximum efficiency of 23.8%, −3-dB saturation gain bandwidth of 2.6 GHz (~16.3%), and −1-dB saturation gain bandwidth of 1.5 GHz (~9.4%). Under the condition of 10-W constant input power driven, the measured −3-dB constant driven bandwidth is 1.4 GHz (~8.8%). [ABSTRACT FROM AUTHOR]

This paper presents the design and simulation of a broadband Ka-band gyrotron traveling-wave tube operating in the $\text {TE}^{d}_{\text {02}}$ mode at the fundamental cyclotron harmonic with a fully dielectric-loaded circuit. Through loading loss-free dielectric on the entire circuit, the dispersion properties of the circuit are changed to maintain resonance condition at a wide frequency band. A sliced lossy dielectric-loaded structure is employed to provide the required loss for stable operation. The interaction circuit is analyzed under the field matching theory, the nonlinear self-consistent theory, and particle-in-cell codes. A saturated peak output power of 100 kW is achieved at 29 GHz, corresponding to a saturated gain of 44 dB and an efficiency of more than 15% within a 3-dB saturated bandwidth of 6.1 GHz (20% relative bandwidth). [ABSTRACT FROM AUTHOR]