Search

Highly oversized mode converters are the critical devices for high power millimeter-wave transmission systems, characterizing high power capacity and low loss. In order to improve the conversion efficiency from TE01 to TE11 mode, the mode coupling mechanism of oversized elliptical waveguides is explored, and an optimal ellipticity interval to obtain the high conversion efficiency is deduced by analyzing the mode coupling capacity. Considering that ellipticity can affect the power capacity, breakdown thresholds of different operating modes in elliptical waveguides are studied. Based on the analyses, a synthesis method to design the elliptical mode converter integrating the mode conversion efficiency and the power capacity is proposed. A highly oversized mode converter working in $W$ -band is designed, and the simulation results demonstrate that the mode converter achieves the high conversion efficiency over 95% in a relative bandwidth of 19.6%. In order to validate the design, a prototype of the mode converter is fabricated, and the high purity of outputted TE11 mode is verified by the measurement. The oversized mode converter designed by the proposed synthesis method features high efficiency, broad bandwidth, and high power capacity, enabling its full utilization of the potential of gyrotron traveling-wave tubes (gyro-TWTs). [ABSTRACT FROM AUTHOR]

This article proposes a method to excite the TM11 mode in circular waveguides. The principle of synthesizing a circular TM mode is deduced based on the electric dipole moment theory first, and the output mode and its purity are analyzed theoretically. Then, a mode conversion scheme to convert the rectangular TE10 into circular TM11 mode via a pair of out-of-phase quasi-TEM mode is proposed. In order to achieve the broadband excitation in a compact size, the ridge gap waveguide is used as a medium between the rectangular and cylindrical waveguide. Simulation results present that the proposed exciter has a propagation bandwidth up to 10 GHz in Ka-band with a mode purity over 98%. A prototype is manufactured and measured, and the presence of TM11 mode and the mode purity are confirmed by a port radiation pattern measurement. The mode exciter features high mode purity, broad bandwidth, and a compact size, which provides a low-power generator for the research of novel gyrobackward-wave devices and devices in the high-power transmission line. [ABSTRACT FROM AUTHOR]

In this letter, a 20-kW-average-power Ka-band TE01 mode gyro-traveling wave tube (gyro-TWT) with a cut-off waveguide section is presented and verified by hot test experiment for the first time. To improve the average output power, the new type gyro-TWT adds a cut-off waveguide in high frequency beam-wave interaction circuits. The large signal nonlinear theory calculations and particle in cell (PIC) simulations show that the new type gyro-TWT has broadband and high-power output performances. The hot test experiment shows that the measured maximum average power is 20.3 kW at 34 GHz, corresponding to a saturated peak power of 169.2 kW, a saturated gain of 52 dB, an efficiency of ~26.9%, and 3 dB bandwidth of 3.2 GHz. [ABSTRACT FROM AUTHOR]

An investigation of the single-frequency iteration method for synthesizing mode converter is taken, and the results show that the synthesized structure has an almost constant perturbation period, which limits the bandwidth of the mode converter. Therefore, a multifrequency iteration method based on variable perturbation periods is proposed to design a broadband oversized TE01-to-TE11 mode converter in this article. To avoid the interference among the perturbation periods corresponding to different frequencies, a weight function is introduced to separate these periods from each other. Using the proposed method, a TE01-to-TE11 mode converter is designed with the conversion efficiency over 95% in the range of 32.5–36.2 GHz (the relative bandwidth of 10.77%). To validate the performance of the proposed mode converter, a prototype is manufactured and measured. In the S-parameters measurement, an average conversion efficiency exceeding 93% and an average ohmic loss near 3% are obtained in the range of 32.3–36.2 GHz. The high purity of circular TE11 mode is demonstrated at the output of the fabricated mode converter according to the measured field patterns. [ABSTRACT FROM AUTHOR]

This article proposes a novel method to design a 90° oversized TE01-to-TM11 mode converter for high-power transmission line. In order to obtain a full power conversion at 90° bend angle rather than an acute angle, the mode coupling process inside the oversized circular waveguide bend is analyzed, and a phase rematching method is deduced. Based on the analysis results, a phase rematching structure, consisting of two identical circular-to-elliptical transitions and a uniform circular waveguide which can transform the phase difference from $-\pi $ /2 into $\pi $ /2, is introduced. Two mode converters with the input/output radius of 14 mm are designed at the center frequency of 34 GHz to validate the proposed method. The results show that the mode converter with a limited height has a bandwidth of 4.6 GHz, while the mode converter with a limited width has 4.3 GHz with conversion efficiency over 95%. The mode converter with a limited height is manufactured and measured, and the high-purity outputs are validated by the obtained radiation field patterns at the output port of the mode converter from 32 to 36 GHz. The proposed mode converter provides a new approach for developing a compact, high-efficiency, and broadband high-power millimeter-wave transmission line. [ABSTRACT FROM AUTHOR]

The mode converter is a key component in a gyrotron traveling-wave tube (gyro-TWT) application system, which can transform the output circular TE $_{0n}$ modes (in a gyro-TWT loaded with lossy ceramic dielectric or photonic bandgap interaction structure, the output mode is normally a TE $_{0n}$ mode) into a mode conducive to transmission and emission (linearly polarized Gaussian-like HE11 mode). In particular, the bandwidth of the TE01–TE11 mode converter is the most important challenge in the conversion sequence. In this paper, based on the deformation of the transverse cross section and the modified multi-frequency iteration synthesis technique along the longitudinal propagation axis, a novel method for synthesis of a broad bandwidth mode converter is proposed. Then, an application of the method to a wideband serpentine TE01–TE11 mode converter with an elliptical section is given. This novel mode converter including transitional waveguides achieves a 19.18% relative bandwidth (conversion efficiency over 95%) at center frequency 30.5 GHz, which increases nearly 195% compared with the conventional circular design, and its structure length is 1151.65 mm. Overall, this method offers a novel solution to the requirement of broad bandwidth in the high-power microwave transmission system. [ABSTRACT FROM AUTHOR]

In this paper, converters of TE $^{\Box }_{{10}}$ –TE $^{\circ }_{{21}}$ mode and TE $^{\Box }_{{10}}$ –TE $^{\circ }_{{01}}$ mode with similar exciting topologic structures are designed and verified for a cold test of gyro-TWT. Both the proposed converters are composed of three sections, including TE $^{\Box }_{{10}}$ to TE $^{\Box }_{{20}}$ mode converter with ridged twist waveguide, TE $^{\Box }_{{20}}$ to TE+22 mode converter with variable cross-shaped waveguide, and the last section TE+22 to TE $^{\circ }_{{21}}$ or TE $^{\circ }_{{01}}$ mode converter ($^{\Box }$ represents the rectangular waveguide, + represents the cross-shaped waveguide, and ° represents the circular waveguide). The mode converters can be designed step-by-step and exhibit excellent wideband performance and high conversion efficiency. Simulation results reveal that the proposed TE $^{\circ }_{{21}}$ mode and TE $^{\circ }_{{01}}$ mode converters have less than 0.04 and 0.03 dB loss over 13.5- and 12-GHz bandwidths, respectively, while the return loss is below −25 dB. Prototype TE $^{\circ }_{{21}}$ and TE $^{\circ }_{{01}}$ mode converters were fabricated and back-to-back millimeter-wave measurements were performed to verify the design. [ABSTRACT FROM AUTHOR]

The design and experiment of a high power and broadband Ku-band gyrotron traveling-wave tube (gyro-TWT) amplifier operating in the TE11 mode are presented in this paper. A new-type broadband rotating TE11 mode input coupler is applied to excite operating mode and a broadband three-disk beryllium oxide ceramic output window is used in the designed gyro-TWT. In order to suppress the potential oscillations, expand working bandwidth, and improve the heat dissipation capability of high frequency system, a periodic beryllium oxide and silicon carbide composite lossy ceramic rings loaded high-frequency circuit with a nonlinear small change output taper is adopted in the gyro-TWT. When the beam voltage is 70 kV and the beam current is 12 A, the experiment of this Ku-band gyro-TWT developed shows that the measured maximum output average power is ~20 kW at the frequency 16 GHz, corresponding to a maximum output pulse power of ~200 kW (10% duty ratio), a gain of 43.0 dB and a maximum efficiency of 23.8%, −3-dB saturation gain bandwidth of 2.6 GHz (~16.3%), and −1-dB saturation gain bandwidth of 1.5 GHz (~9.4%). Under the condition of 10-W constant input power driven, the measured −3-dB constant driven bandwidth is 1.4 GHz (~8.8%). [ABSTRACT FROM AUTHOR]

Novel compact input and output couplers for broadband operation of sheet beam traveling wave tubes are analyzed, designed, and cold tested. Multistage stepped waveguide and cascaded Bragg resonators are proposed and applied to improve the performance and extend the operating bandwidth. Optimized curve-Bragg resonators are studied to correct the phase between the reflector and $H$ -bend waveguide, which bring about a further enhancement of the coupler behavior. HFSS simulations predict a −3 dB transmission bandwidth about 38% and 34% are achieved, respectively, in Ku and $Q$ band. Besides, the large beam tunnel property of this kind of coupler benefit the beam transport of sheet beam devices. Different components as the input and output couplers for Ku- and $Q$ -band SB-TWT are manufactured and cold tested. Results of vector network analyzer measurement and simulation present an excellent agreement. [ABSTRACT FROM AUTHOR]

Distributed lossy dielectric is of considerable interest for high-power milli- and submillimeter radiation sources, particularly for gyrotron traveling wave tubes (gyro-TWTs). The analytical design and experiment of a Q-band gyro-TWT loaded with periodic lossy dielectric rings operating in the circular \TE01 mode at the fundamental cyclotron harmonic are presented. The gyro-TWT is driven by a 70-kV 10-A helical electron beam with a velocity ratio of 1.0. Hot test performs maximum peak output power of 152 kW, 41-dB saturated gain, and 21.7% efficiency at 47.6 GHz. The measured bandwidth over 100 kW is at the range of 47–49 GHz. PIC simulation and large-signal prediction show excellent agreements to the hot test results. The potential backward wave oscillation interactions involving the spurious modes \TE11, \TE21, and \TE02 are effectively suppressed by loading lossy dielectric rings periodically. The Q-band gyro-TWT is zero-drive stable at the operating points, which demonstrates that loading lossy dielectric is excellent to stabilize the spurious oscillations. Moreover, the designs of magnetron injection gun, interaction circuits, and input and output structures are also achieved to satisfy the requirements. [ABSTRACT FROM AUTHOR]