Search

The splitting and threshold currents of vacuum arc cathode spots in axial magnetic fields (AMFs) up to 220 mT are investigated experimentally. Measurements are made on electrodes of Cu and CuCr25 with electrode separations of 2 and 6 mm. The electrode diameter is 30 mm. All the experiments are conducted in a demountable vacuum chamber evacuated continuously by a turbo-molecular pump to a pressure of the order of 10−3 Pa. The spots are photographed using a high-speed digital camera with an exposure time of 2 μs. The AMF is applied by means of two permanent magnets placed symmetrically inside the chamber. The experimental results indicate that the splitting and threshold current decrease in the presence of AMF and tend to certain constant values when the field gets stronger. The splitting and threshold currents are considerably larger than Cu electrodes than those with CuCr25 electrodes. With increasing electrode separation, the splitting current decreases while the threshold current increases. Possible explanations are proposed to account for the experimental observations. [ABSTRACT FROM AUTHOR]

The Robson drift phenomenon is a macroscopic reflection of the movement of a cathode spot (CS) in oblique magnetic field (OMF). Although it was discovered many years ago, its physical mechanism remains unclear. In this paper, the influence of OMF on the Robson drift of CS motion is simulated. A 2-D stepwise model of the movement of a single CS in OMF is established. It is assumed that the probability of generating a new spot in directions of Amperian force, anti-Amperian force, and directions perpendicular to Amperian force, is proportional to the magnetic pressure around the old spot. The drift angle and velocity of the CS in OMF are simulated. The simulation results show that the drift angle of the CS in OMF has liner relationship with the inclination angle of magnetic field, and it has no obvious relationship with the strength of the applied magnetic field and the amplitude of the arc current, which are in a good agreement with the experimental results. Besides, under the same angle of magnetic field, the velocity of spot motion increases linearly with the strength of OMF. Moreover, the simulation results show that the transverse magnetic field component has a much more predominant influence on the CS velocity than the axial magnetic field component, which are also in agreement with the experimental results. [ABSTRACT FROM AUTHOR]

The motion of cathode spots plays a crucial important role in removing oxide layer on a metal surface by vacuum arc. In this paper, the characteristics of the motion of a single cathode spot on metal surface with oxide layer are investigated experimentally. Experiments are conducted in a detachable vacuum chamber. A hollow copper anode with a hole of 10~\text mm \times 10 mm is used in order to observe the 2-D motion of the cathode spot. The motion of the cathode spot during the descaling process is photographed by a high-speed digital camera with an exposure time of 2~\mu \texts . Experimental results indicate that there are slow motion and fast motion of the cathode spot during descaling process, and the slow motion is the basic characteristic in most of the descaling time. The probability distribution of the cathode spot’s displacement and resident time, the average velocity, and the movement parameter S^2/t are analyzed quantitatively. The results indicate that with the increase of gap distance or the decrease of oxide layer thickness, the cathode spot becomes more active. [ABSTRACT FROM PUBLISHER]

In this paper, the influence of an external transverse magnetic field, in parallel with the cathode surface, on the ignition probabilities of a cathode spot (CS) in the Amperian and retrograde directions is developed assuming that the ignition probability of a new CS is proportional to the magnetic pressure around the old one. Furthermore, both stepwise and statistical models are established to simulate the random and retrograde motions of a single CS of vacuum arc, assuming that the 2-D motion of the CS in the $xy$ plane is equivalent to the synthesis of two independent 1-D movements along the $x$ - and $y$ -axis, respectively. With both models, the random and retrograde motions of a single Cu CS are simulated step by step and statistically, respectively. It was found that stepwise simulation results agree well with the statistical results, and they are also consistent with the relevant experimental results. The difference in retrograde motion velocity between the present stepwise model and that assuming that a new CS can be ignited in any direction around the old one is discussed. [ABSTRACT FROM PUBLISHER]

In this paper, the relationship between the external transverse magnetic field (TMF) and the ignition probability of new cathode spot in different directions is developed assuming that the ignition probability of a new cathode spot is proportional to the magnetic pressure around the old one. Furthermore, a method is established to simulate the 2-D motion of a cathode spot step-by-step. With this approach, stepwise simulations of the 2-D retrograde motion of a single Cu cathode spot are carried out in a large range of flux density of TMF ( Bem ). Simulation results indicate that, if the self-generated magnetic field Bsm exceeds the applied magnetic field Bem , i.e., B\textrm {em}\le B{sm} , there is a linear relationship between the velocity of the retrograde motion and Bem , in certain range of Bem , after which the velocity of the retrograde motion increases slowly and nonlinearly with further increase of B\textrm {em} . This phenomenon agrees well with relevant experiment results. In the linear stage, the dependence of velocity constant on the spatial step and the temporal step of the motion of cathode spot is investigated as well. Moreover, when Bem>Bsm , the velocity of cathode spot decreases with the increase of B\textrm {em} , even the macroscopic motion is still in the retrograde direction. This effect might also contribute to the reversal of cathode spot motion from the retrograde direction to the Amperian direction at strong TMF besides the predominant effect of the deflection of arc column toward the Amperian direction. [ABSTRACT FROM PUBLISHER]

Cathode spots (CSs) dynamics in the initial expansion stage of high-current triggered vacuum arc and the influence of axial magnetic field (AMF) was investigated experimentally. Experiments were conducted with butt contacts in a demountable vacuum chamber. Images of CSs were photographed with a high-speed digital camera with exposure time of 2 \(\mu \) s. The uniform and constant AMF in the intercontacts region was supplied by external magnetic field coil. In high-current triggered vacuum arc, CSs expanded across the cathode surface in basically a ring-shaped pattern. Experimental results showed that the expansion ring consisted of group CSs (GCSs) and individual CSs at the beginning of the expansion process. The GCS moved outward faster than individual CS. Research results indicated that an AMF could reduce the tendency of formation of GCS. The effect of local plasma and global plasma, which could be significantly influenced by AMF, on the motion pattern and distribution of CSs in the initial expansion stage was investigated. [ABSTRACT FROM PUBLISHER]

The expansion speed of cathode spots (CSs) in the initial expansion stage of high-current triggered vacuum arc was investigated experimentally. Experiments were conducted with butt contacts in a demountable vacuum chamber. Images of CSs were photographed with a high-speed digital camera with exposure time of 2 \mus. The uniform constant axial magnetic field (AMF) was supplied by an external magnetic field coil. The combined influence of contact gap of 2–10 mm and AMF of 0–70 mT on CSs expansion speed in the initial expansion stage was mainly investigated. Investigation results indicated that the variation of contact gap could influence the CSs expansion speed by changing the plasma density inside the cathode arc root in two ways: loss of arc plasma and constriction of arc column. AMF could weaken these two effects caused by the variation of contact gap. In addition, experimental results indicated that there existed a critical current for a given AMF. If the arc current peak was less than the critical current, the given AMF could inhibit the arc column constriction effectively both at contact gap of 8 and 10 mm, which could maintain the dependence that CSs expansion speed increased with contact gap; otherwise, the constriction of arc column played a major role in the influence on CSs expansion speed. In this case, the CSs expansion speed was lower at contact gap of 10 mm than that at 8 mm. [ABSTRACT FROM AUTHOR]

The initial expansion process in a drawn vacuum arc and the influence of axial magnetic field (AMF) were investigated experimentally in a demountable vacuum chamber. Arc characteristics were investigated with the aid of a high-speed digital camera with an exposure time of 2 \mu\s . In a drawn vacuum arc, the arc sequence begins with the bridge column arc formed after the rupture of the molten metal bridge. This column evolves into the transition mode, which consisted of a central column with few or no cathode spots (CSs) outside the column, and then into the fully diffuse mode. Experimental results indicated that in transition mode arc, the expansion process could be characterized by the appearance of CSs outside the central column, and could be classified into two patterns, “slow” expansion and “quick” expansion according to the characteristics of the formation and motion of new CSs (conducting channels) outside the central column of arc. The influence of AMF and its distribution on the expansion process was also investigated. Investigation results indicated that AMF had two contrary effects, i.e., inhibiting effect and prompting effect, on the initial expansion stage of drawn vacuum arc. Furthermore, saddle-shaped AMF could encourage the arc transition into diffuse mode more effectively than bell-shaped AMF. [ABSTRACT FROM PUBLISHER]

The method of magnetic field calculation and its influence on simulating the motion of cathode spots (CSs) in a vacuum arc were investigated in this paper. A method based on coordinate transformation and magnetic field superposition principle was proposed. In this method, the influence of current passing through an electrode rod and a contact plate was taken into account. Comparison was made between the proposed method and two simplified methods which were on the basis of the Biot–Savart law. Moreover, simulation results of CS motion with magnetic field calculated by different methods were shown and compared. Investigation results indicated that current passing through the contact plate and electrode rod could significantly influence the magnetic field and thus influence the simulation results of CS motion. Furthermore, it was shown that the proposed magnetic field calculation method had higher calculation accuracy with acceptable consumption of calculation time. [ABSTRACT FROM AUTHOR]

Removing an oxide layer on a metal surface by vacuum arc has been preliminarily used in the metallurgical industry as an environment-friendly substitutor for the traditional acid-washing technique. In this paper, the influence of protection gas pressure on descaling process is investigated experimentally. Arc images taken by a high-speed digital camera indicated that the descaling rate was closely related to the motion pattern of cathode spots in different gas pressures. The decrease of descaling rate with the increase of gas pressure could be partly attributed to the formation of cathode-spot group and its less mobility at high gas pressure. The influence of gas pressure on the power density of cathode spot was also analyzed. It seemed that higher gas pressure would lead to the decrease of the ratio of power input into the cathode spot to the total arc power, which could also contribute to the decrease of the descaling rate. [ABSTRACT FROM PUBLISHER]

Experiments on a drawn vacuum arc with forced current zero, which was formed by injection of a countercurrent with a frequency of 1 kHz, were conducted in a detachable vacuum chamber. The prospective peak main current was 3.5 kA. Arc characteristics were investigated with the aid of a high-speed digital camera with an exposure time of 2 \mu\s. In this paper, the influence of axial magnetic field (AMF) distribution and anode material on the evolution of vacuum arc in the initial expanding stage is mainly investigated. Three types of electrodes were used in the experiments. One of them was simple electrodes with butt contact plates, and the other two types were specially designed electrodes generating a conventional bell-shaped AMF profile and a saddle-shaped AMF distribution, respectively. OFHC copper and WCu10 were used as anodes for the electrodes with bell-shaped AMF. The appearance of vacuum arc in the forced current-zero stage is also investigated. [ABSTRACT FROM AUTHOR]

Much research has been done on the motion of low-current vacuum-arc cathode spots (CSs). The relationship between the motion velocity of CSs and the magnetic field, particularly the relationship between the direction of CS motion and the ratio of Bz/Bt, has been revealed. However, little investigation on the motion of CSs in high-current vacuum arcs has been conducted before. In this paper, the motion of CSs of high-current vacuum arcs under different axial magnetic fields was experimentally investigated. Simultaneously, calculation of the motion of CSs based on the empirical formula has been done, and comparison with experiments and analysis were given. Experiments were conducted in a detachable vacuum chamber with an arc current of 10 kA (root mean square). Images of CSs were photographed with a high-speed digital camera with an exposure time of 2 \mu\s. With computer-aided numerical processing, the spatial distribution of the CSs was obtained, based on which the magnitude and direction of the CS motion velocity were calculated, and the CS motion trajectories around the current peak were plotted. Results indicated that the properties of the CS motion in high-current vacuum arcs are similar to those in low-current vacuum arcs. [ABSTRACT FROM AUTHOR]

In this paper, high-current vacuum arc (VA) breaking experiments in vacuum interrupters were conducted using two kinds of high-capacity (larger diameter) axial magnetic field (AMF) electrodes with contact gap distance changing from 10 to 40 mm. Triggering arc mode and fixed gap distance were adopted. Experimental results showed that during the initial diffusion stage, the arc voltage of high-current VA got a peak value. The change in high-current VA appearance would also affect the curve of arc voltage. With the increase of contact gap distance, the voltage of high-current VA increased and the VA near the anode appeared contracted, and its shape was changed from cylinder to cone. In the shorter gap distance, for cup electrodes, the plasma jets mix with each other and the arc column appears like a bright cone, whereas for coil electrodes, the plasma jets are clear and the column appears like a cylinder, and the transfer of arc appearance affects arc voltage distribution. Moreover, arc twist and rotation often occur under longer gap and higher current, which is due to the larger radial magnetic field component generated by AMF coils, and arc voltage appeared high-frequency and high-amplitude noise, and ultimately resulted in the distortion of the arc current in the current experimental conditions (lower charging voltage of capacitor). [ABSTRACT FROM PUBLISHER]

Based on a 2-D magnetohydrodynamic model, high-current vacuum arcs (HCVAs) under axial magnetic fields (AMFs) with consideration of current density distribution at the cathode are simulated and analyzed. The current density distribution at the cathode used in the simulation is obtained by processing the image of cathode spots from experiments. In order to study the influence of current density distribution at the cathode on vacuum arc characteristics, HCVA is simulated under two kinds of current density distribution at the cathode. Then, for HCVA simulation in a half-sinusoidal period, the current density distribution at the cathode and the AMF delay are both taken into account. The simulation results show that the nonuniform current density at the cathode makes the values of the arc plasma parameters in the interelectrode region larger and their radial distribution more nonuniform than the uniform current density at the cathode. The more uniform current density at the cathode and the stronger AMF at the moments in the second 1/4 cycle make the values of the arc plasma parameters in the central region smaller and their radial distribution broader than those in the first 1/4 cycle. In addition, the simulation results will also be compared with the experimental results. [ABSTRACT FROM AUTHOR]

The theoretical and experimental studies of cathode plasma jets in vacuum arc and the effect of magnetic field on them have been under way for several years. In this paper, different axial magnetic field electrodes were tested in a vacuum chamber, obvious individual cathode plasma jets were observed, and the cathode-jet inclination was also detected. Based on the numerical calculation of magnetic field in interelectrode region and the measurement of cathode-jet inclination in experimental results, it is proven that the inclination angle of composite magnetic field (the combination of the axial, the azimuthal, and the radial components) is consistent with the inclination angle of cathode plasma jets, which indicates that the cathode plasma jets in the arc column flow along the magnetic-field direction when the high-current vacuum arc is diffused or even constricted slightly. Meanwhile, it was also found that plasma jets far from the cathode surface mixed with each other and became ambiguous when the electrode gap increases to a certain distance. [ABSTRACT FROM PUBLISHER]

Based on a 3-D steady magnetohydrodynamic model, the high current vacuum arc subjected to a realistic spatial magnetic field generated by the cup-type contacts was simulated. The influence of the realistic spatial magnetic field profile on plasma's rotation behavior was analyzed. The distribution of the azimuthal velocity on anode side under realistic spatial magnetic field profile was quite different from that under uniform axial magnetic field. [ABSTRACT FROM PUBLISHER]

The anode melting in high-current vacuum arcs leads to the increase of metal vapor and liquid droplets around current zero and even the interruption failure. In our recent experiments of the cup-shaped axial magnetic field (AMF) contacts, an obvious clockwise swirl flow of the liquid copper was detected on the anode surface. However, if an additional external AMF which is reverse to the AMF generated by the contacts was introduced, the rotation direction of the liquid copper swirl flow on the anode surface could reverse to anticlockwise. These phenomena indicate that AMF has great influence on the performance of anode melting and its swirl flow. [ABSTRACT FROM AUTHOR]