Search

Dielectric barrier discharges (DBDs) driven by nanosecond high-voltage pulses can be quite different from those driven by alternating current (ac) sources, on both electrical characteristics and plasma microparameters. In this article, the power measurement strategy in nanosecond pulsed coaxial DBDs is optimized. The effect of different experimental parameters on energy deposition and reduced electric field in plasma is investigated. First, the results measured using the instantaneous power (from the production of voltage and current) method and that using the v – q trace (Lissajous curve) method are compared and the source of divergence is analyzed. By comparing monitor capacitors with different materials and capacitances, it is demonstrated that the high-frequency response of the monitor capacitor is essential and the capacitance value can be adjusted according to the applied voltage, taking both the dynamic range of oscilloscope and the signal-to-noise ratio into consideration. Second, the influence of morphology of ground electrode, voltage rising time, and pulse width on energy deposition per-pulse and reduced electric field, obtained from the nitrogen spectral line-ratio, is studied. It is found that the copper foil promotes the discharge energy coupling per-pulse compared with the copper grid, while the reduced electric field obtained from the nitrogen line-ratio with the copper foil is weaker. A shorter rising time will also enhance the energy coupling per-pulse, as well as the reduced electric field. [ABSTRACT FROM AUTHOR]