Search

Shear horizontal (SH) waves are commonly generated by periodic permanent magnet (PPM) electromagnetic acoustic transducers (EMATs) in metallic media. Conventional PPM EMATs generate ultrasonic waves, which simultaneously propagate both forward and backward. This can be an undesirable characteristic, since the backward wave can be eventually reflected, reaching the receiver transducer where it can mix with the signal of interest. This limitation can be overcome using two side-shifted PPM arrays and racetracks coils to generate SH waves in a single direction. That design relies on the EMAT wavefront diffraction to produce constructive and destructive interference, but produces unwanted backward traveling sidelobes. Here, we present a different design, which uses a conventional PPM array and a dual linear-coil array. The concept was numerically simulated, the main design parameters were assessed and the unidirectional EMAT was experimentally evaluated on an aluminum plate, generating the SH0-guided wave mode nominally in a single direction. The amplitude ratio of the generated waves at the enhanced to the weakened side is above 20 dB. Since the wavefronts from the two sources are perfectly aligned, no obvious backward sidelobes are present in the acoustic field, which can significantly reduce the probability of false alarm of an EMAT detection system. [ABSTRACT FROM AUTHOR]

Periodic permanent magnet (PPM) array electromagnetic acoustic transducers (EMATs) can efficiently generate and receive shear horizontal (SH) ultrasonic waves. Conventional PPM EMATs typically generate waves which simultaneously propagate both forward and backward. This can complicate the received signals and make it difficult to locate the position of scatterers. Unidirectional generation of ultrasounds can be achieved if two ultrasonic sources are separated by a predefined distance and are excited with the proper delay. Relying on this principle, EMATs have been previously designed aiming to generate other modes of ultrasonic waves. The main challenge when extending this conception to an SH-wave EMAT is how to restrict each coil to its specific magnet array. We present the concept of a unidirectional SH EMAT consisting of two racetrack coils and two interlaced PPM arrays, that are slightly shifted sideways, in such a way that the generated wavefronts still properly interfere. The design was fabricated and experimentally evaluated in an aluminum plate generating the SH0 guided wave mode. The forward to backward generated wave ratio is above 20 dB and well agrees with finite element simulations. [ABSTRACT FROM AUTHOR]