Search

Epoxy resin is widely deployed as a high voltage electrical insulation material when compounded with inorganic fillers. However, in the laboratory, the filler prevents visual observation of the long-term degradation known as electrical treeing. To date therefore, much laboratory testing has been conducted on unrepresentative unfilled materials. Here, the impact of micro-sized fillers on the treeing phenomenon in an epoxy system has been explored. Sub-micrometre resolution 3D reconstructions of electrical trees are reported from X-ray computed tomography (XCT) using an advanced ‘pink beam’ synchrotron light source imaging system. The role of filler particles between 1 and 10 μm in size on tree channel propagation is reported. In highly filled materials (30% by weight) a radical change in tree growth behavior is seen, leading to bush tree rather than branch tree growth. The dielectric breakdown time at constant stress was also found to increase as the square root of the filler level. The change in geometry of tree growth may explain the extended life of filled materials in high voltage applications. [ABSTRACT FROM AUTHOR]

This paper reports observations of electrical tree growth by X-ray computed tomography (XCT) in multiple steps. Growth between times of observation has been obtained by subtraction of an image from the subsequent one. Partial discharge (PD) signals were also recorded during tree growth. It is determined that not all PDs support tree extension. By comparing the energy released by PD and the vaporization energy of newly grown tree channels, it is found that only the PDs that reach the tree tips can contribute to the growth of tree length. In such cases, the efficiency of energy conversion was very high, whereas PD resulting in increases in tree channel diameter had a much lower conversion efficiency. Nano XCT images reveal many finer branches along the trunk of the main tree and in the front of the main channel tree tips. It seems that those finer branches led to tree growth, but were not directly associated with local PD. The new imaging techniques have shown great value in resolving the relationship between partial discharge activity and electrical tree growth, providing a platform for deeper understanding of the tree growth process, and interpretation of partial discharge measurements. [ABSTRACT FROM AUTHOR]

Partial discharge (PD) characteristics are inherently linked to associated electrical tree growth characteristics. This paper employs both phase-resolved patterns and pulse-sequence analysis (PSA) to study PDs in a short branch-tree grown from a metallic needle tip. It is found that the shape of PSA dV-dV patterns vary with applied voltage; in particular the values of characteristic voltage difference increase with applied voltage. At 10 kV the value of characteristic voltage difference decreases with tree growth, the average number of PDs per cycle increases, the PD magnitudes decrease, and the characteristic wing-like phase-resolved pattern evolves into a turtle-like pattern. This paper proposes a physical model relating PD activity to tree development, considering space charge accumulation inside the tree channel. All key features of experimental results are explained by the model. It is shown that the characteristic voltage differences are determined by the local PD inception and extinction electric fields. These key parameters determining the PD events can be calculated giving a clear physical interpretation of PD measurements, which is invaluable to those using PD as a condition monitoring or asset management tool. [ABSTRACT FROM AUTHOR]

Electrical tree growth is a precursor to dielectric breakdown in high voltage polymeric insulation. Partial discharge (PD) has a close relationship with electrical tree propagation and can be both used to understand the aging process, and as a diagnostic tool for asset management. In this paper it is shown that PD patterns change through the early stages of tree growth, and consideration of these changes gives insight into the processes of tree growth. Here, trees have been grown in epoxy resin in needle-plane geometries with 2 mm gaps, at 15 kV peak AC. The PD phase-resolved pattern can be regarded as a combination of the well-known turtle-like and wing-like PD patterns. As a tree extends its length, a wing-like pattern is seen and the maximum discharge magnitude has an almost linear relationship with the maximum length of the growing branch. Comparison of the energy released by discharges and the vaporization energy needed for tree growth supports the proposal that the wing-like pattern corresponds to PDs responsible for growth in length of the trees. Implications for mechanisms for tree growth are considered. Results suggest that asset managers may be able to use partial discharge analysis to distinguish different stages of tree growth, providing a valuable prognostic tool for optimising high voltage plant management and replacement. [ABSTRACT FROM PUBLISHER]