Search

Recent hot test details and inspiring results of the W-band lossy-dielectric-loaded gyrotron traveling-wave tube (gyro-TWT) developed at the University Electronic Science and Technology of China (UESTC) are reported in this letter. Measurement of the gyro-TWT had achieved a pulse output power over 100 kW with a broad bandwidth of 8.5 GHz (92.0~100.5 GHz). For the first time as we know, the W-band gyro-TWT can stably operate with a 10% duty cycle and the average output power is over 10.3 kW in the frequency range. Excellent stability, pure spectrum and mode patterns are all verified in the hot test experiment. [ABSTRACT FROM AUTHOR]

Effects of the output window reflection instability on the performance of our designed ${W}$ -band broadband gyrotron traveling wave tube (gyro-TWT) were studied by the simulation and hot test experiments. Strong oscillations and frequency self-modulation (FSM) in the after-cavity interaction (ACI) region were observed in the zero-driven state with a two-layer window and are verified with the beam-wave particle-in-cell simulation. Oscillations and FSM of 80–81.8 GHz and 91.03–94.68 GHz are, respectively, generated from the TE22 and TE02 modes in the ACI region due to the high window reflection level. By using the “sandwich” and meta-surface windows with low reflection and broad bandwidth, the parasitic ACI oscillations can be effectively suppressed. The maximum saturated output power is improved to 156.8 kW at 94 GHz and is zero-driven stable in our recent hot test experiments. [ABSTRACT FROM AUTHOR]

An optimum approach for designing a TE01 mode oversized waveguide bend is proposed based on angular-deformed circular waveguide. Due to the deformation of the circular waveguide cross section, the degeneracy of the TE01 mode and the TM11 mode is removed, and the mode conversion inside the waveguide bend is weakened. Characterizations of the angular-deformed circular waveguide with different deformation and its influence on the mode spectrum, the transmission loss, and the power capacity are investigated. Based on the analysis results and the coupling-wave theory, a Ka-band broadband oversized deformed circular waveguide bend with the propagating TE01 mode is designed, fabricated, and measured. A good agreement between the calculation results and the S-parameter measurement of a prototype is achieved. The transmission efficiency is over 95% in the frequency range of 26.5–35.9 GHz (the relative band is over 30%). The near-field test results further demonstrate the high output purity of the TE01 mode in the working frequency band. [ABSTRACT FROM AUTHOR]

In this article, the design and experimental verification of a 200-kW Q-band gyrotron traveling wave tube (gyro-TWT) amplifier are presented. A low-velocity spread magnetic injection electron gun (MIG), a new type of multichannel TE01 mode input coupler, and a broadband double-disk output window are adopted in the design to improve the performance of the gyro-TWT. At the same time, the lossy ceramic ring-loaded high-frequency interaction circuit is constructed to provide the required loss for stable operation, and the potential oscillations are effectively suppressed. Saturated peak power of 208 kW and 12.5-kW average output power are measured at 47 GHz by hot test, corresponding to a saturated gain of 50.2 dB, an efficiency of 29.4%, and a −3-dB bandwidth of 5.5 GHz. [ABSTRACT FROM AUTHOR]

Design and microwave measurement of a linearly polarized circular TE11 mode coupler are reported in this article. Based on our earlier designed input coupler with smooth wall, we proposed an improved structure with ridges loading resulting in a bandwidth up to 29.2%. Simulation results show the port reflection S11 less than −10 dB is in 7.9–10.6 GHz. And the split transmission S21 and S31are over −3.4 dB in this frequency range. According to the simulation results, the designed input coupler is fabricated and measured with the vector network analyzer. The measurement results show excellent performance, which is in good agreement with the simulation when the conductor loss is taken into consideration. In addition, an input coupler with a cutoff waveguide is designed to improve the efficiency of single-port transmission and the power utilization. Simulation results show the transmission efficiency of the single port achieves 91%. [ABSTRACT FROM AUTHOR]

Design and measurement of a broadband compact circular TE11 mode input coupler for gyrotron traveling wave tubes (gyro-TWTs) are presented in this article. Different from the T-junction, Y-type, and multiple-hole input couplers, the proposed coupler has a merit of compact dimensions formed by the H-plane of a rectangular cavity. The simulation results show that the port reflection $S_{11}$ is less than −10 dB within 7.9–9.93 GHz. Also, the split transmissions $S_{21}$ and $S_{31}$ are over −3.4 dB in this band. It indicates that the relative bandwidth is 22.8%, and the transmission efficiency is higher than 90%. To further broaden the bandwidth, we propose an improved input coupler with ridges achieving an excellent bandwidth of 28.6%. The designed input coupler has been measured with open boundaries and matched output ports. The simulation and measurement results are in good agreement. The compact TE11 mode input coupler had been applied in our X-band gyro-TWT design. [ABSTRACT FROM AUTHOR]

A Ka-band broadband TE01-mode overmoded waveguide bend based on an elliptical waveguide structure is proposed for high-power transmission line in this paper. To investigate the mode conversion inside the waveguide bend, the mode coupling coefficients of elliptical waveguide bend are theoretically deduced. The influence of the cross section on the power-handling capacity and the transmission efficiency is studied. Calculation and simulation results present that the proposed overmoded waveguide bend has a propagation bandwidth of 7 GHz (relative bandwidth of 21%) with an efficiency over 95%. A prototype is fabricated and measured. The average transmission efficiency is over 93% in the range of 29–36 GHz according to the S-parameter measurement. The results of near-field test demonstrated that a TE01 mode with high purity is obtained at the output port of waveguide bend. The high-power performance is investigated by connecting it with a Gyrotron traveling wave tube, and the waveguide bend works stable under a maximum output power of 150 kW. The measurement results demonstrate that a novel approach is proposed successfully for the design of high-power waveguide bend. [ABSTRACT FROM AUTHOR]