Search

It has recently been suggested that ferroelectric (FE) negative capacitance effects can be used to achieve steep subthreshold slope field-effect transistors, which are greatly desired for reducing energy consumption in modern digital electronics. Here, we propose that this concept can be improved by the introduction of a very thin metal or metal-like layer (a quantum metal) between the FE and the semiconductor channel. We show how to design this layer so that it attenuates the polarization charge of the FE, applying an appropriate charge to the semiconductor, while at the same time presenting a relatively constant capacitance to the FE layer, as is needed to stabilize the negative capacitance regime. For homogeneous polarization, we estimate that this device (a QMFeFET) can have extremely steep subthreshold characteristics (2 mV/decade over 11 decades) and that its energy and delay performance are advantageous. [ABSTRACT FROM AUTHOR]

Silicon nanowire (SiNW) field-effect transistors (SiNWFETs) are of great potential as a high-sensitivity charge sensor. The signal-to-noise ratio (SNR) of an SiNWFET sensor is ultimately limited by the intrinsic device noise generated by carrier trapping/detrapping processes at the gate oxide/silicon interface. This carrier trapping/detrapping-induced noise can be significantly reduced by replacing the noisy oxide/silicon interface with a Schottky junction gate (SJG) on the top of the SiNW. In this paper, we present a tri-SJG SiNWFET (Tri-SJGFET) with the SJG formed on both the top surface and the two sidewalls of the SiNW so as to enhance the gate control over the SiNW channel. Both experiment and simulation confirm that the additional sidewall gates in a narrow Tri-SJGFET indeed can confine the conduction path within the bulk of the SiNW channel away from the interfaces and significantly improve the immunity to the traps at the bottom buried oxide/silicon interface. Therefore, the optimal low-frequency noise performance can be achieved without the need for any substrate bias. This new gating structure holds promises for further development of robust SiNWFET-based charge sensors with low noise and low operation voltage. [ABSTRACT FROM AUTHOR]