Search

In this paper, new steady-state analysis is proposed for a series resonant converter (SRC) that provides closed-form expressions for converter waveforms. Using the proposed analysis, explicit equations are obtained to design the converter components. It is shown that an SRC can be modeled through a nonlinear differential equation with discontinuous inputs. A Laplace-based theorem (LBT) is provided to obtain the steady-state analytic solution of the resonant converter differential equations. Using the LBT, a flowchart is proposed to analyze the converter where the nonlinearity of differential equation is removed by defining intermediate variables. The variable duty ratio SRC is analyzed using the proposed flowchart. Accurate, closed-form, and explicit equations for converter waveforms, voltage gain, current phase lag, zero voltage switching, and discontinuous conduction mode boundaries are derived. The proposed analysis is compared with conventional methods and its accuracy is validated through simulations and experimental results. Moreover, using the proposed method, a novel procedure is provided for the optimal design of the converter and is compared with conventional design approaches. [ABSTRACT FROM AUTHOR]

A new inverter control approach, called enhanced virtual synchronous machine (eVSM), is proposed based on the VSM concept. Unlike existing VSM approaches, the eVSM does not emulate the rotating inertia based on an assumption of the unlimited energy storage, but it deploys the physically existing inertia of the dc-link element. The eVSM adopts an innovative way of enlarging the inertia utilization range, which obviates the need for having a large dc-link element or a dedicated battery storage system, while still providing the same inertia response of an equivalent synchronous machine. Theoretical developments and numerical results presented in this paper confirm that the proposed eVSM can present a stabilizing support to the grid similar to a synchronous machine despite the small size of its dc-link element. Moreover, its transient responses can be improved beyond those of conventional synchronous machines thanks to the possibility of more flexibly adjusting damping and governor functions. [ABSTRACT FROM AUTHOR]

This paper presents a power transfer matrix model and multivariable control method for a doubly-fed induction generator (DFIG) wind energy system. The power transfer matrix model uses instantaneous real/reactive power components as the system state variables. It is shown that using the power transfer matrix model improves the robustness of controllers as the power waveforms are independent of a dq frame of reference. The sequential loop closing technique is used to design the controllers based on the linearized model of the wind energy system. The designed controller includes six compensators for capturing the maximum wind power and supplying the required reactive power to the DFIG. A power/current limiting scheme is also presented to protect power converters during a fault. The validity and performance of the proposed modeling and control approaches are investigated using a study system consisting of a grid-connected DFIG wind energy conversion system. This investigation uses the time-domain simulation of the study system to: 1) validate the presented model and its assumptions, 2) show the tracking and disturbance rejection capabilities of the designed control system, and 3) test the robustness of the designed controller to the uncertainties of the model parameters. [ABSTRACT FROM AUTHOR]