Search

Electric tree growth is a key ageing mechanism leading to breakdown of high voltage electrical insulation. Partial discharges (PDs) are invariably associated with electrical tree inception and propagation. In turn, the physical structure of an electrical tree influences the characteristics of partial discharge activity. Interpretation of PD patterns is therefore central to developing an understanding of the tree propagation process, and also to the use of PD patterns as an asset management tool. Our previous research indicates that the phase resolved PD (PRPD) patterns and pulse sequence analysis (PSA) patterns evolve with tree propagation. A method was proposed to estimate the point-on-wave inception and extinction voltages of PDs in tree channels within each power cycle. It was shown that the evolution of PD patterns is a consequence of changes to PD inception and extinction voltages as a tree develops. This paper provides a deterministic model of partial discharge in tree channels. Simulations of PDs in a straight non-conductive tree channel are based on experimental PD inception, extinction and residual voltages. The quantitative simulations reproduce almost all the characteristics of observed PRPD and PSA patterns. It is concluded that PD events are determined by five key parameters: tree structure, applied voltage, PD inception voltage, PD extinction voltage and PD residual voltage. Key parameters estimated by the method, and the models proposed explain PD activity in non-conductive trees. It is suggested that the PSA and PRPD patterns should be discussed together to fully understand the PD events. This model forms a platform for generating robust information for asset managers using PD measurements from high voltage equipment in service. [ABSTRACT FROM AUTHOR]

Partial discharge (PD) characteristics are inherently linked to associated electrical tree growth characteristics. This paper employs both phase-resolved patterns and pulse-sequence analysis (PSA) to study PDs in a short branch-tree grown from a metallic needle tip. It is found that the shape of PSA dV-dV patterns vary with applied voltage; in particular the values of characteristic voltage difference increase with applied voltage. At 10 kV the value of characteristic voltage difference decreases with tree growth, the average number of PDs per cycle increases, the PD magnitudes decrease, and the characteristic wing-like phase-resolved pattern evolves into a turtle-like pattern. This paper proposes a physical model relating PD activity to tree development, considering space charge accumulation inside the tree channel. All key features of experimental results are explained by the model. It is shown that the characteristic voltage differences are determined by the local PD inception and extinction electric fields. These key parameters determining the PD events can be calculated giving a clear physical interpretation of PD measurements, which is invaluable to those using PD as a condition monitoring or asset management tool. [ABSTRACT FROM AUTHOR]

Electrical tree growth is a precursor to dielectric breakdown in high voltage polymeric insulation. Partial discharge (PD) has a close relationship with electrical tree propagation and can be both used to understand the aging process, and as a diagnostic tool for asset management. In this paper it is shown that PD patterns change through the early stages of tree growth, and consideration of these changes gives insight into the processes of tree growth. Here, trees have been grown in epoxy resin in needle-plane geometries with 2 mm gaps, at 15 kV peak AC. The PD phase-resolved pattern can be regarded as a combination of the well-known turtle-like and wing-like PD patterns. As a tree extends its length, a wing-like pattern is seen and the maximum discharge magnitude has an almost linear relationship with the maximum length of the growing branch. Comparison of the energy released by discharges and the vaporization energy needed for tree growth supports the proposal that the wing-like pattern corresponds to PDs responsible for growth in length of the trees. Implications for mechanisms for tree growth are considered. Results suggest that asset managers may be able to use partial discharge analysis to distinguish different stages of tree growth, providing a valuable prognostic tool for optimising high voltage plant management and replacement. [ABSTRACT FROM PUBLISHER]

Electrical trees are widely grown in laboratories from metallic needle electrodes to enable the degradation process to proceed rapidly at voltages of ∼10 kV AC. Here it is shown that cone-shaped air gaps may form at a needle tip, even when they are not visible optically. Using X-ray imaging techniques, samples with and without air gaps up to 55 μm long have been characterized. The presence of air gaps led to partial discharge (PD) patterns resembling void-discharges. Prior to tree initiation, discharge characteristics evolved with increased voltage increments and increased phase lag behind the applied voltage. These changes to PD characteristics reflect a change in the physical state of the air gap. Although samples with air gaps generally initiated trees quicker than those with no gap, PD activities did not appear to play a decisive role in tree initiation times. However, initial voids were found to have major impact on the subsequent tree growth. In samples with persistent pre-tree air-gap PDs, trees grew larger branchy structures with higher PD magnitudes. In addition, the PDs became more asymmetric between positive and negative half-cycles than occurred in samples with no air gaps. It is shown that understanding the interface between the needle and polymer at a micron scale is critical to interpretation of laboratory tree growth experiments. [ABSTRACT FROM AUTHOR]