Search

Dual active bridge is often considered in many dc/dc converter applications where high efficiency, input/output voltage ratio, and power level are required. Recently, a predictive control technique, named moving discretized control set model predictive control has been introduced, in order to achieve faster dynamics and stable operation throughout the power and terminal voltage ranges, considering global control parameters. However, even if this technique provides flexible multi-objective control, its large signal stability remains in questions. In this article, the proposed control design is described in detail, and its large signal stability is analyzed, considering the case of a dual active bridge converter operating in single-phase shift. The obtained results show insights into factors that stabilize or destabilize the converter operation. The proposed control and stability analysis is validated through both simulation and experimental testing. [ABSTRACT FROM AUTHOR]

Pulsed power loads (PPLs) are commonly incorporated in medium voltage dc microgrids on naval vessels. To mitigate their detrimental effects, dedicated energy storage systems can be installed and their converters need to have excellent disturbance rejection capability. To facilitate this objective, a moving-discretized-control-set model-predictive-control (MDCS-MPC) is proposed in this letter and applied on a dual-active-bridge converter. Fixed switching frequency is maintained, enabling easy passive components design. The proposed MDCS-MPC has a small number of calculating points in each switching period, which enables the implementation in standard commercial control platforms. The operating principle of the MDCS-MPC is introduced in development of a cost function that, on one hand, provides stiff voltage regulation; on the other hand, minimizes transformer current stress online. Theoretical claims are verified on a 20 kHz 1 kW dual active bridge. [ABSTRACT FROM AUTHOR]

Pulsed power loads (PPLs) are becoming prevalent in medium-voltage naval dc micro-grids. To alleviate their effects on the system, energy storages are commonly installed. For optimal performance, their interface converters need to have fast dynamics and excellent disturbance rejection capability. Moreover, these converters often need to have voltage transformation and galvanic isolation capability since common energy storage technologies such as batteries and supercaps are typically assembled with low-voltage strings. In order to address these issues, a moving discretized control set model predictive control (MDCS-MPC) is proposed in this paper and applied on a dual-active-bridge converter. Fixed switching frequency is maintained, enabling easy passive components design. The proposed MDCS-MPC has a reduced prediction horizon, which allows low computational burden. The operating principle of the MDCS-MPC is introduced in the development of a cost function, which provides stiff voltage regulation. Resonance damping and sampling noise resistance can also be achieved with the proposed cost function. An adaptive step is introduced to enable a fast transition. Assessments on the performance of the proposed MDCS-MPC are conducted. Comparisons with other control methods are also provided. Experimental validations on a 300 V/300 V 20-kHz 1-kW dual-active-bridge converter are carried out to verify the theoretical claims. [ABSTRACT FROM AUTHOR]

This paper discussed an active-bridge-active-clamp (ABAC) topology that is suitable for highpower more-electric-aircraft applications. Though conventional modulation techniques can be applied to ABAC converters, they present drawbacks, such as increased low-voltage (LV) current ripple and limited power transfer capability. To address these problems, a phase-shift-modulation (PSM) scheme is proposed to provide clean dc terminal current at the LV side while maintaining high power transfer capability and efficiency in a wide operating range. The proposed PSM has a complete switching harmonics cancellation on the LV terminals independent of the operating conditions. This results in high quality power without any ac components, thus minimizing passive filtering. In addition, when terminal voltages vary from their nominal values, the proposed PSM can improve the maximum power transfer capability of the ABAC converter compared to the conventional approach. The theoretical claims are validated by both simulation and experimental results on a 10-kW 270-V/28-V ABAC converter. [ABSTRACT FROM AUTHOR]

The implementation of finite-control-set model predictive control (FCS-MPC) in voltage source inverters (VSIs) can make the system suffer from poor current harmonics performance, which may complicate the design of the required AC filter. To overcome this shortcoming, a carrier-based modulated model predictive control (CB-MMPC) strategy is proposed in this paper. This method enables the utilization of existing PWM modulation techniques with FCS-MPC, where a modulation waveform with zero-sequence signal injection is generated and compared to a triangular carrier wave, while optimizing the selection of the switching states. As it is shown, the studied CB-MMPC strategy not only considerably improves the current total harmonic distortion (THD) but also attains the performance of fast current dynamic response and robustness as the traditional FCS-MPC. Herein, the detailed implementation of the CB-MMPC control strategy is given, while considering its application to the current feedback control loop of a three-phase three-wire two-level VSI modulated at constant switching frequency. Finally, PLECS circuit simulation and a 3-kW VSI prototype are used to verify the superiority and the effectiveness of the presented CB-MMPC strategy. This is also benchmarked to the FCS-MPC and dead-beat based controllers. [ABSTRACT FROM AUTHOR]