Search

A low switching frequency of power converter is mandatory in high-power motor drives to suppress the switching loss and thermal stress. In this case, the asynchronous modulation may incorporate abundant harmonics. The well-known approach to solve the problem is to adopt the synchronous modulation. Among existing techniques, synchronous space vector modulation (SSVM) owns the simpler implementation. However, it is a big challenge to establish a closed-loop scheme based on SSVM. Therefore, this manuscript proposes the flux trajectory tracking based implementation of SSVM for induction motors. A state observer is first built up in a hybrid reference frame to acquire the stator flux with a long sampling period. Then, the stator flux is enforced to move on a predefined trajectory with an adjustable rotation speed. As a result, synchronizations and symmetries of voltage pulses, smooth transitions between different pulse patterns and fast dynamic response can be achieved without complex compensations and extraction of fundamental signals. Both simulations and experiments verify the effectiveness of proposed method. Particularly, the current harmonics are effectively suppressed compared with traditional method with asynchronous modulation. [ABSTRACT FROM AUTHOR]

Active disturbance rejection control using extended state observer (ESO) is less dependent on the knowledge of the system. It has proved to be an excellent scheme for speed control of electrical drives. However, for time-varying disturbance, the observation precision of conventional ESO is undesired, which limits the speed tracking accuracy. Accordingly, this article proposes an enhanced speed controller for electrical drives based on adaptive switching high-order ESO (ASHESO). First, the critical parameters affecting the steady-state performance of ASHESO are determined according to frequency analytical results. Then, optimized observer gain is obtained by modifying a part of pole locations, which weakens the influence of noise on estimated state. Finally, an adaptive switching gain mechanism is proposed according to the closed-loop tracking error and the swiftness of dynamic response is maintained. The proposed speed controller has achieved high estimation accuracy for disturbance and strong immunity to measurement noise. The feasibility and effectiveness of the strategy is verified on a laboratory permanent magnet synchronous motor (PMSM) drive system. [ABSTRACT FROM AUTHOR]

The general rules of rotor pole and armature winding configurations combinations for 24-slot stator wound field flux switching machines (SWFFSMs) are investigated thoroughly in this article. Meanwhile, based on the virtual coil method, a novel general auxiliary evaluation variable, which is proportional to the fundamental amplitude of open-circuit flux-linkage of armature coil is proposed in this article. Hence, these SWFFSMs with larger open-circuit flux-linkage and back-EMF can be obtained effectively. In addition, the effect of rotor poles on the complementarity of armature windings is analyzed so that more sinusoidal and symmetrical back-EMF can be acquired. Furthermore, for these SWFFSMs with larger open-circuit back-EMF, the torque capability is restricted to a considerable extent due to the deep magnetic saturation caused by overlapping armature winding. Hence, a new method by optimizing the ratio of armature slot area and excitation slot area is proposed in this article to ensure that the higher torque density of selected SWFFSMs can be maintained. To verify the validity of analysis and methodology proposed in this article, seven representative SWFFSMs are chosen for verification at no load by the finite-element analysis (FEA) while a 24s/17p SWFFSM with the highest torque density is chosen for further verification at on-load conditions by the FEA and experiments. [ABSTRACT FROM AUTHOR]

In this article, we present a closed-loop dynamic control scheme for a dual-stator winding induction generator (DWIG) with selective harmonic elimination pulsewidth modulation (SHEPWM). This control scheme can be applied in a variable-frequency ac power system based on the DWIG, which is able to operate in low-carrier-ratio conditions, especially in high-power aeroapplications. Common closed-loop induction machine control schemes, such as vector control strategy, generally lead to control failure with SHEPWM implemented. This proposed closed-loop dynamic control scheme makes the dynamic operation of the DWIG power system feasible with SHEPWM. The scheme consists of three main parts: the complex-signal observer for DWIG, outer loop controller for DWIG, and stator flux-linkage trajectory tracking controller. The complex-signal observer provides the extra steady-state components of control signals by using the complex coefficient filter. The outer loop controller provides the dynamic commands for control signals. Finally, the flux-linkage trajectory tracking control (FTTC) synthesizes these signals and serves as the inner loop. The simulation and experimental results verify the validity and effectiveness of the proposed scheme. [ABSTRACT FROM AUTHOR]

The moving-coil type voice coil motor (VCM) has very light moving mass, which can achieve higher reciprocating frequency and work efficiency. However, the power supply lead connected to the moving coil can be easily broken under long-term reciprocating motion, so it is rarely used in compressor drive systems. The core technology of the compressor development trend is a driving motor with high-efficiency, high reciprocating frequency, certain piston stroke, and light moving mass. Due to its structural characteristics, the moving-coil type VCM has broad application prospects. This article proposes a new structure for power supply of a moving coil VCM based on the principle of electromagnetic induction. The proposed VCM can overcome the problems of aging and disconnection of power supply lines caused by reciprocating motion, and meet the requirements of high-frequency and long-term repetitive action of the moving coil. The content of this article is as follows. First, the construction of the proposed VCM is introduced. Second, the power-driven circuit based on interleaving double switch forward converter is provided. Finally, two working modes of drive circuit for reciprocating motion are proposed. Simulation and experimental results verify the effectiveness of the method. [ABSTRACT FROM AUTHOR]

This paper presents a five-phase dual random space vector pulsewidth modulation (FPDR-SVPWM) strategy with an optimized probability density function (PDF) for a five-phase voltage-source inverter, and its performance and evaluation are also analyzed. Based on the nearest four vectors modulation method, the FPDR-SVPWM strategy, combined with random switching frequency and random zero vector, is investigated to significantly reduce the amplitude of high-order harmonics near the switching frequency and its integer multiples. For the nonsinusoidal power supply, third harmonic injection is introduced in this modulation strategy as well. Considering the effect of random numbers on the performance, an optimized Beta distribution is studied in detail. In order to analyze harmonic dispersion degree qualitatively and quantitatively, the power spectral density and the harmonic spread factor are both employed to assess the performance of the FPDR-SVPWM strategy. A series of results of simulation in MATLAB and experiments based on field programmable gate array demonstrate that the proposed modulation strategy is correct and valid, and it distributes high-order harmonics into a wide range without affecting the fundamental wave and third harmonic. [ABSTRACT FROM AUTHOR]