Search

A two-phase emission detector containing 5 kg of liquid Xe is installed at the horizontal experimental channel of the research nuclear reactor IRT MEPhI to measure the liquid Xe response to nuclei recoils with kinetic energies below 1 keV. Preliminary tests have demonstrated that \geq 15~\mu\s electron lifetime in liquid Xe and \sim 10 photoelectrons single ionization electron signal are achieved. These parameters are sufficient to detect and identify events at the single electron level. [ABSTRACT FROM PUBLISHER]

The ATLAS collaboration at CERN operated a combined test beam (CTB) from May until November 2004. The prototype of ATLAS data acquisition system (DAQ) was used to integrate other subsystems into a common CTB setup. Data were collected synchronously from all the ATLAS detectors, which represented nine different detector technologies. Electronics and software of the first level trigger were used to trigger the setup. Event selection algorithms of the high level trigger were integrated with the system and were tested with real detector data. The possibility to operate a remote Event Filter farm synchronized with the ATLAS Trigger and Data Acquisition System (TDAQ) was also tested. Event data, as well as detector conditions data, were made available for offline analysis. [ABSTRACT FROM AUTHOR]

In the ATLAS experiment at the LHC, the output of read-out hardware specific to each subdetector will be transmitted to buffers, located on custom made PCI cards ("ROBINs"). The data consist of fragments of events accepted by the first-level trigger at a maximum rate of 100 kHz. Groups of four ROBINs will be hosted in about 150 Read-Out Subsystem (ROS) PCs. Event data are forwarded on request via Gigabit Ethernet links and switches to the second-level trigger or to the Event builder. In this paper a discussion of the functionality and real-time properties of the ROS is combined with a presentation of measurement and modelling results for a testbed with a size of about 20% of the final DAQ system. Experimental results on strategies for optimizing the system performance, such as utilization of different network architectures and network transfer protocols, are presented for the testbed, together with extrapolations to the full system. [ABSTRACT FROM AUTHOR]

The Online Software is the global system software of the ATLAS data acquisition (DAQ) system, responsible for the configuration, control and information sharing of the ATLAS DAQ System. A test beam facility offers the ATLAS detectors the possibility to study important performance aspects as well as to proceed on the way to the final ATLAS DAQ system. Last year, three subdetectors of ATLAS-separately and combined-were successfully using the Online Software for the control of their data taking. In this paper, we describe the different components of the Online Software together with their usage at the ATLAS test beam. [ABSTRACT FROM AUTHOR]

Describes a Process Management component of the online software of the ATLAS experiment data acquisition system. Purpose of the Process Manager; Design challenges of the software agent; Architecture of the Process Manager system; Performance and scalability of the system; Conclusions.

Presents a study which discussed an overview, performance and scalability of a computer software applied in a data acquisition system prototype. Purpose of the system prototype; Components of the software; Summary.