Search

With the advent of multicore processors the emphasis incomputation is moving from sequential to parallel processing. Still, applications that require strong sequential performance do not achieve their highest performance/power when executing on current multicoresystems. As the computational needs vary significantly across different applications and with time, there is a need to dynamically allocate appropriate computational resources on demand to suit the applications' current needs, in order to minimize the energy consumption. The Energy per Instruction (EPI) could be further decreased by dynamically adapting the voltage and frequency to better fit the changing characteristics of the workload. Not only can a core be forced to a low power mode when its activity level is low, but the power saved by doing so could be opportunistically re-budgeted to other cores to boost the overall system throughput. To this end, we propose a holistic solution to energy efficiency improvement by seamlessly combining heterogeneity, Dynamic ResourceAllocation (DRA) and Dynamic Voltage and Frequency Adaptation (DVFA) capabilities to adapt the core resources to the changing demands of applications. Our results show that the proposed scheme provides anEPI reduction of about 17.9% when compared to the baseline heterogeneous multicore, 14% when compared to the baseline heterogeneous multicore with DVFA only and about 16.5% when compared to the baseline heterogeneous multicore with DRA only.

The computational needs of a program change over time. Sometimes a program exhibits low instruction level parallelism (ILP), while at other times the inherent ILP may be higher; sometimes a program stalls due to a large number of cache misses, while at other times it may exhibit high cache throughput. Asymmetric Multicore Processors (AMP) have been proposed to allow matching the computing needs of a thread to a core where it executes most efficiently. Some of the recent works focus on AMPs consisting of a monolithic large out-of-order (OOO) core and a small in-order (InO) core. Dynamic swapping of threads between these cores is then facilitated to improve energy efficiency of the threads without impacting performance too negatively. Swapping decisions are made at coarse grain instruction granularities to mitigate the impact of migration overhead. This excludes many opportunities for swap at a fine granular level. In this paper we consider a single superscalar OOO core that can morph itself dynamically into an InO core at runtime. In order to determine when to morph from OOO to InO and vice-versa, we rely on certain hardware performance monitors. Using these performance monitors we estimate the energy-delay-squared product (ED2P) for both modes of operation, which is then used to make morphing decisions. The morphing hardware support is simple and is already available in certain Intel processors to facilitate debug. The proposed scheme has low migration overhead, that enables fine-grain morphing to achieve more energy efficient computing by trading a small loss of performance for much greater energy reduction.

Asymmetric Multicore Processors (AMP) have emerged as likely candidates to solve the performance/power conundrum in the current generation of processors. Most recent work in this area evaluate such multicores by considering large (usually out-of-order (OOO)) and small (usually in-order (InO)) cores on the same chip. Dynamic online swapping of threads between these cores is then facilitated whenever deemed beneficial. However, if threads are swapped too often, the overheads may negatively impact the benefits of swapping. Hence, in most recent work, thread swapping decisions are made at coarse grain instruction granularities, leaving out many opportunities. In this paper, we propose a scheme to mitigate the penalty imposed by thread swapping and yet achieve all the benefits of AMPs. Here, a single superscalar OOO core morphs itself into an InO core at runtime, whenever determined to be performance/Watt efficient. Certain Intel processors already have a similar mechanism to statically morph an OOO core to an InO core to facilitate debug. We extend this existing capability to perform dynamic core morphing at runtime with an orthogonal objective of improving power efficiency. Results indicate that on an average, performance/Watt benefits of 10% can be extracted by our proposed morphing scheme at a very small performance penalty of 3.8%. Since this scheme is based on existing mechanisms readily available in current microprocessors, it incurs no hardware overheads.

As conventional CMOS technology is approaching scaling limits, the shift in trend towards stacked 3D Integrated Circuits (3D IC) is gaining more importance. 3D ICs offer reduced power dissipation, higher integration density, heterogeneous stacking and reduced interconnect delays. In a 3D IC stack, all but the bottom tier are thinned down to enable through-silicon vias (TSV). However, the thinning of the substrate increases the lateral thermal resistance resulting in higher intra-layer temperature gradients potentially leading to performance degradation and even functional errors. In this work, we study the effect of thinning the substrate on temperature profile of various tiers in 3D ICs. Our simulation results show that the intra-layer temperature gradient can be as high as 57°C. Often, the conventional static solutions lead to highly inefficient design. To this end, we present a system-level situation-aware integrated scheme that performs opportunistic thread migration and dynamic voltage and frequency scaling (DVFS) to effectively manage thermal violations while increasing the system throughput relative to stand-alone schemes.

The emergence of asymmetric multicore processors(AMPs) has elevated the problem of thread scheduling in such systems. The computing needs of a thread often vary during its execution (phases) and hence, reassigning threads to cores(thread swapping) upon detection of such a change, can significantly improve the AMP's power efficiency. Even though identifying a change in the resource requirements of a workload is straightforward, determining the thread reassignment is a challenge. Traditional online learning schemes rely on sampling to determine the best thread to core in AMPs. However, as the number of cores in the multicore increases, the sampling overhead may be too large. In this paper, we propose a novel technique to dynamically assess the current thread to core assignment and determine whether swapping the threads between the cores will be beneficial and achieve a higher performance/Watt. This decision is based on estimating the expected performance and power of the current program phase on other cores. This estimation is done using the values of selected performance counters in the host core. By estimating the expected performance and power on each core type, informed thread scheduling decisions can be made while avoiding the overhead associated with sampling. We illustrate our approach using an 8-core high performance/low-power AMP and show the performance/Watt benefits of the proposed dynamic thread scheduling technique. We compare our proposed scheme against previously published schemes based on online learning and two schemes based on the use of an oracle, one static and the other dynamic. Our results show that significant performance/Watt gains can be achieved through informed thread scheduling decisions in AMPs.

Recent trends in technology scaling have enabled the incorporation of multiple processor cores on a single die. Depending on the characteristics of the cores, the multicore may be either symmetric (SMP) or asymmetric (AMP). Several studies have shown that in general, for a given resource and power budget, AMPs are likely to outperform their SMP counterparts. However, due to the heterogeneity in AMPs, scheduling threads is always a challenge. To address the issue of thread scheduling in AMP, we propose a novel dynamic thread scheduling scheme that continuously monitors the current characteristics of the executing threads and determines the best thread to core assignment. The real-time monitoring is done using hardware performance counters that capture several micro architecture independent characteristics of the threads in order to determine the thread to core affinity. By controlling thread scheduling in hardware, the Operating System (OS) need not be aware of the underlying micro architecture, significantly simplifying the OS scheduler for an AMP architecture. The proposed scheme is compared against a simple Round Robin scheduling and a recently published dynamic thread scheduling technique that allows swapping of threads (between asymmetric cores) at coarse grain time intervals, once every context switch ( 20 ms for the Linux scheduler). The presented results indicate that our proposed scheme is able to achieve, on average, a performance/watt benefit of 10.5% over the previously published dynamic scheduling scheme and about 12.9% over the Round Robin scheme.

The trend toward multicore processors is moving the emphasis in computation from sequential to parallel processing. However, not all applications can be parallelized and benefit from multiple cores. Such applications lead to under-utilization of parallel resources, hence sub-optimal performance/watt. They may however, benefit from powerful uniprocessors. On the other hand, not all applications can take advantage of more powerful uniprocessors. To address competing requirements of diverse applications, we propose a heterogeneous multicore architecture with a Dynamic Core Morphing (DCM) capability. Depending on the computational demands of the currently executing applications, the resources of a few tightly coupled cores are morphed at runtime. We present a simple hardware-based algorithm to monitor the time-varying computational needs of the application and when deemed beneficial, trigger reconfiguration of the cores at fine-grain time scales to maximize the performance/watt of the application. The proposed dynamic scheme is then compared against a baseline static heterogeneous multicore configuration and an equivalent homogeneous configuration. Our results show that dynamic morphing of cores can provide performance/watt gains of 43% and 16% on an average, when compared to the homogeneous and baseline heterogeneous configurations, respectively.