Search

Current transformers (CTs) are extensively used for the measurement of electrical energy, and hence they play a crucial role in the revenue generation for power distribution utilities. The novelty of this paper is that it presents artificial neural network (ANN) application for the ratio and phase angle error corrections of CTs in the presence of harmonic distortions. In this paper, the behaviors of silicon iron alloy and nanocrystalline alloy CTs are examined by the means of a number of experimental tests under the sinusoidal and distorted waveform conditions. The relation between the nature of CTs secondary current waveforms (CTSwf) with their metrological properties, connected burdens, and nature of load currents (linear or nonlinear) is established. The training data are obtained by the nature of CTSwf in terms of amplitude errors, time shifts, and deviations caused by different harmonic contents between input and output quantities. The ANN is trained for various operating conditions. The implementation of the error correction system and data acquisition is done using dSPACE 1104 software. The experimental results illustrate that the proposed technique can be used for error compensation in case of sinusoidal and the distorted waveform composed of fundamental and many harmonics. [ABSTRACT FROM AUTHOR]

An online approach based on application of search coil for transformer winding fault detection is presented in this paper. Earlier attempts report use of search coil for the detection of transformer interturn fault. This paper extends application of search coil for detection of winding displacement in addition to interturn fault identification. Experimental results based on specially designed 10-kVA transformer are presented to analyze search coil voltages during healthy and faulty conditions. The algorithm detects phase ($U$ , $V$, $W$), side (LV, HV), and precise location of the fault. Discrimination between interturn fault and winding radial displacement is also achieved by search coil voltage analysis. The results are experimentally verified based on impedance analyzer plots. Experimental analysis indicates that the proposed method is independent of load on the transformer, vector group, nature of winding, balanced or unbalanced source voltage, source voltage harmonics, inrush, and overexcitation conditions. [ABSTRACT FROM AUTHOR]

Interturn short-circuit faults are the leading cause of power transformer's failure. If not detected at the incipient stage, these faults usually develop into more severe faults that would result in irreversible damage to the transformer, unexpected outages, and consequential losses. This paper presents a transformer interturn fault detection system (TIFDS) for the detection of an interturn fault at the inception stage in power transformers. TIFDS is immune to supply voltage imbalance, constructional asymmetries, and instrumental errors. It also takes care of unequal load distribution. The TIFDS algorithm makes the transformer symmetrical in its entire three phases and sets primary-side neutral current to zero value. This is achieved by computing and applying various correction coefficients. However, under the interturn fault condition, TIFDS characterizes the behavior of neutral current. Simulation and experimentation studies are carried out on the 400/110-V, 3 \times 2.5 kVA power transformer. Presented test results demonstrate the effectiveness of the proposed system. [ABSTRACT FROM AUTHOR]

This paper presents high step-up dc-to-dc converter for low voltage sources such as solar photovoltaics, fuel cells, and battery banks. To achieve high voltage gain without large duty cycle operation, combination of coupled inductor and switched capacitor voltage doubler cells are used. By incorporating active clamp circuit, voltage spike due to the leakage inductance of the coupled inductor is alleviated and zero-voltage switching turn on of the main and auxiliary switch is obtained. Due to the use of MOSFETs of low voltage rating and soft turn on of the switches, conduction loss and switching losses are reduced. This improves the efficiency and power density of the converter. The proposed converter can achieve high voltage gain with reduced voltage stress on MOSFET switches and output diodes. Design and analysis of the proposed converter is carried out, and finally, a 500-W experimental prototype is built to verify theoretical analysis. [ABSTRACT FROM PUBLISHER]

An optimized resonant converter with zero-voltage switching over an extensive range of loading is proposed to integrate renewable energy sources to an onboard charger. In conventional resonant circuit, high-frequency transformer (HF) parasitic components are used as tank circuit, this degrades the performance due to non-optimal magnetic components. Here, the HF transformer is fabricated with optimized resonant tank circuit shunt branch inductance ($L_p$) as magnetizing inductance, hence eliminating the need for shunt branch inductance. The proposed resonant converter circuit design is optimized for minimum kilovoltampere rating and better voltage regulation with both duty cycle and frequency control (mixed control method). Furthermore, the performance of the converter at a very light load is improved using the proposed control method. Incorporating a low- $R_{\text{DS}}(\text{ON})$ silicon carbide mosfet and softly turning off the switches for a wide load variation minimizes conduction and switching losses and improves efficiency. Using powder core for the design of the tank circuit reduces magnetic losses. A 3-kW prototype of the converter is built to verify the performance from no load to full load. The highest efficiency of the proposed converter is 98.6%, attained at 50% full load. [ABSTRACT FROM AUTHOR]

An isolated four channel dc/dc converter with zero voltage switching is proposed as the front-end of multiple inverter structures to integrate renewable and other low voltage energy sources to micro grids. The interleaving technique is adopted to connect each module of proposed converter to a common dc source. This dc source can be a fuel cell stack, PV panels, battery, or any other low voltage dc source. All four channels are interleaved and a phase shift of $90^{\circ }$ is provided between the gate signals of each channels, which reduces the input current ripple. The output port of the proposed converter provide four isolated and regulated dc voltages. These isolated dc sources can be connected in series or parallel or series-parallel manner to obtain required dc-link voltage of various inverter structure. Issues like capacitor voltage balancing of diode clamped multilevel inverters can overcome through the proposed converter. By incorporating a coupled inductor for isolation and energy storage along with voltage multiplier circuit, the proposed converter can achieve higher voltage step up with lower turns ratio and lower voltage stress at moderate duty ratio. Hence, mosfets of low voltage rating (low $R_{DS}(\text{ON})$ ) can be utilized to reduce conduction loss. A 2 kW prototype of the proposed interleaved dc/dc converter is developed and tested with diode clamped three-level inverter, five-level inverter, and three-phase two-level inverter to verify the design. [ABSTRACT FROM AUTHOR]

A nonisolated soft-switched-integrated boost converter having high voltage gain is proposed for the module-integrated PV systems, fuel cells, and other low voltage energy sources. Here, a bidirectional boost converter is integrated with a resonant voltage quadrupler cell to obtain higher voltage gain. The auxiliary switch of the converter, which is connected to the output port acts as an active clamp circuit. Hence, zero voltage switching turn-on of the MOSFET switches are achieved. Coupled inductor's leakage energy is recycled to the output port through this auxiliary switch. In the proposed converter, all the diodes of the quadrupler cell are turned off with zero-current switching (ZCS). This considerably reduces the high-frequency turn-off losses and reverse recovery losses of the diodes. ZCS turn-off of the diodes also remove the diode voltage ringing caused due to the interaction of the parasitic capacitance of the diodes and the leakage inductance of the coupled inductor. Hence, to protect the diodes from the voltage spikes, snubbers are not required. The voltage stress on all the MOSFETs and diodes are lower. This helps to choose switches of low voltage rating (low R\text{DS}(\text{ON})) and, thus improve the efficiency. Design and mathematical analysis of the proposed converter are made. A 250-W prototype of the converter is built to verify the performance. [ABSTRACT FROM AUTHOR]