Search

The meat grinder is a basic circuit for inductive pulsed-power supply (IPPS). Based on meat grinder, the Institute of Advanced Technology proposed a circuit called the slow transfer of energy through capacitive hybrid (STRETCH) meat grinder, in which an Integrated Gate Commutated Thyristors (IGCT) is selected as the main switch. Tsinghua University proposed the STRETCH meat grinder with inverse current commutation with semiconductor devices (ICCOS) in which the main switch is replaced by a thyristor and the ICCOS subcircuit is introduced to turn off the main switch. To reduce the opening switch voltage and increase the current turning-off capacity for IPPS, this paper presents a novel circuit topology named the meat grinder with self-charged capacitor and thyristors (SECTs). The key idea of the SECT topology is to turn off the primary current by the energy transfer capacitor, which is precharged. The meat grinder with SECT has larger capacity than the STRETCH meat grinder because it replaces the IGCT with a thyristor and is simpler than the STRETCH meat grinder with ICCOS because it only needs one capacitor. The suggested circuit is more suitable for IPPS module with high energy density. Simulation and experiment have been carried out to validate the circuit. [ABSTRACT FROM PUBLISHER]

Because it possesses higher current turn-off capability, the inverse current commutation with semiconductor devices (ICCOS) is a better option for the opening switch of an inductive pulsed power supply than the integrated gate commutated thyristor. This paper investigates the counter-current capacitor, which is the key component that determines the turn-off result and the volume of the counter-current branch. The major contributions of this paper include the following: 1) deriving an analytical expression for the minimum precharged capacitor voltage that can reliably turn off the main switch; 2) verifying this expression through a series of experiments within a current range of 0 to 4000 A and an energy range of 0 to 50 kJ; 3) giving an approximate expression for the optimal capacitance that minimizes the precharged energy; and 4) investigating the variation trends of the optimal capacitance and the corresponding optimal precharged energy with varying inductor current. [ABSTRACT FROM PUBLISHER]

The meat grinder with SElf-charged Capacitor and Thyristors circuit is a novel circuit for inductive pulsed power supplies. The energy transfer capacitor is one of the key components in this circuit. And its capacitance C and the precharged voltage UC are key parameters worth investigating. The circuit working process and corresponding numerical calculation method are briefly introduced. And the method validity is verified through experiments. Then, the influences of $C$ and UC on circuit performance indices, i.e., the maximum voltage across the main switch $V_{{\mathrm{sopm}}} , the secondary current multiplication factor m2 , the ratio of the maximum capacitor energy over the inductor charging energy \eta C , and the self-recovery rate of the precharged capacitor voltage k\mathrm{UC} , are quantitatively analyzed through parameter sweep. Generally speaking, large C is conducive to lower $V_{{\mathrm{sopm}}} ; small m2 ; small C and low UC are conducive to lower \eta C and higher $k_{{\mathrm{UC}}}$ . Moreover, the analytical expression of $k_{{\mathrm{UC}}}$ is given. With C and UC elaborately selected, $k_{{\mathrm{UC}}}$ can achieve 100%. In addition, the balance relationship between two contradictory indices $V_{{\mathrm{sopm}}}$ and $k_{{\mathrm{UC}}}$ is obtained by solving a biobjective optimization problem and using the genetic algorithm. [ABSTRACT FROM AUTHOR]

The major strengths of inductors in energy density and power density make an inductive pulsed power supply (IPPS) a promising option for pulsed power supplies in an electromagnetic launch system. Among the circuits for an IPPS, the capacitor-aided meat grinder circuits constitute an important branch. An analytical method for the working processes of these circuits is proposed in this paper. The core of this method is the decoupling of a high-order circuit into the superposition of a resistor–inductor first-order equivalent subcircuit and a resistor–inductor–capacitor second-order equivalent subcircuit. The validity and accuracy of this method have been verified through comparison with a numerical simulation. The results show that this method possesses both satisfactory accuracy and excellent computational speed. With the same circuit parameters and time step, the time cost of this method is three orders of magnitudes lower than the time cost of a numerical simulation. Moreover, this method contributes to more intuitive understanding and more essential insight into the working principles of the capacitor-aided meat grinder circuits. [ABSTRACT FROM PUBLISHER]