Search

Infrastructure-to-vehicle (I2V) and vehicle-to-vehicle (V2V) communications are often combined to extend the connectivity and coverage in the Intelligent Transportation System (ITS) and its applications, e.g., augmented reality, real-time parking management and online shopping. Through multi-hop I2V and V2V communications, requesting vehicles are always connected to road side units (RSUs) even when they do not reside within the RSUs’ coverage range. However, there may be not adequate network resource for several I2V and V2V links when multiple vehicles request services simultaneously. In this paper, we propose a joint frequency scheduling and power control scheme to enhance connectivity in multi-hop I2V/V2V networks. We associate I2V and V2V links with tuple-links, then formulate an NP-hard problem in which a frequency scheduler and a power controller are jointly designed for the tuple-links. The NP-hard problem is decomposed into two separate subproblems by employing the delayed column generation technique. Then, we employ a method for linear programming and a greedy algorithm to address these subproblems. Through numerical experiments with practical parameter settings, we demonstrate the proposed scheme outperforms several existing ones in terms of connectivity enhancement, measured by the service resumption number and average achieved throughput. Furthermore, the efficiency of our scheme is further enhanced when the number of available channels is high, and buffer size equipped to the requesting vehicles is large. [ABSTRACT FROM AUTHOR]

Automotive infotainment systems are expected to be first deployed on highways to service drivers travelling long distances, who are more likely to utilize the infotainment applications. In order to meet the stringent requirements of the infotainment systems, road side units (RSUs) are installed along the highway to facilitate a continuous vehicle-to-infrastructure (V2I) connectivity. Due to the long travelling distance and small coverage of the individual RSU, a more cost-effective solution would be to combine V2I with the vehicle-to-vehicle (V2V) communications to maintain the continuous connectivity. In this paper, we propose a new dynamic cooperation scheme that employs a dynamic forwarder selection strategy to generate an adaptive multi-hop V2V path for connectivity maintenance and throughput enhancement at a vehicle located outside of the RSU’s coverage range. For the commonly assumed scenario that all vehicles travel in the same direction and at the same speed, we develop an analytical model and derive closed-formed expressions for the average out-of-range connection time, number of service resumptions and achieved throughput. The developed analytical model provides insights into the impacts of inter-RSU distance, vehicles’ assistance willingness and the target vehicle’s buffer size to the network performance. Simulation results with practical parameter settings show that our proposed scheme is effective in improving connectivity while offering a high throughput for the target vehicle. In particular, a high vehicle density, more assistance willingness by the forwarders and a large buffer size at the target vehicle are shown to be helpful in sparse RSU deployments. [ABSTRACT FROM AUTHOR]

In automotive infotainment systems, vehicles using the applications are serviced via continuous infrastructure-to-vehicle (I2V) communications. Additionally, the I2V communications can be combined with vehicle-to-vehicle (V2V) connectivity owing to the small area covered by road side units (RSUs). However, dozens of vehicles have to compete for limited bandwidth when they request service simultaneously in the covered area. In this paper, we propose a joint scheduling and power control scheme for I2V and V2V links in the RSUs’ coverage range. Mapping the I2V and V2V links to tuple-links, we formulate a mixed-integer nonlinear programming (MINLP) problem where frequency scheduler and power controller for those tuple-links are jointly designed. Then, we employ the delayed column generation technique and the transmission pattern definition to decompose the MINLP problem into a transmission pattern scheduling problem, as well as a power control problem. Therein, the transmission pattern scheduling problem is solved by linear programming while a greedy power control algorithm is developed. Simulation results with practical parameter settings show that our proposed scheme outperforms several conventional schemes in terms of service disruption and achieved throughput while maintaining throughput fairness among the requesting vehicles. In particular, a high channel number, a small power level number, and a large buffer size at the requesting vehicles are shown to be helpful for our proposed scheme. [ABSTRACT FROM AUTHOR]

This paper aims to maximize the energy efficiency of a downlink cloud radio access network (C-RAN). Here, data is transferred from a baseband unit in the core network to several remote radio heads via a set of edge routers over capacity-limited fronthaul links. The remote radio heads then send the received signals to their users via radio access links. Both data sharing and compression-based strategies are considered for fronthaul data transfer. New mixed-integer nonlinear problems are formulated, in which the ratio of network throughput and total power consumption is maximized. These challenging problem formulations include practical constraints on routing, predefined minimum data rates, fronthaul capacity, and maximum remote radio head transmit power. By employing the successive convex quadratic programming, iterative algorithms are proposed with guaranteed convergence to the Fritz John solutions of the formulated problems. Significantly, each iteration of the proposed algorithms solves only one simple convex program. Numerical examples with practical parameters confirm that the proposed joint optimization designs markedly improve the C-RAN’s energy efficiency compared to benchmark schemes. They also show that the fronthaul data-sharing strategy outperforms its compression-based counterpart in terms of energy efficiency, in both single-hop and multi-hop network scenarios. [ABSTRACT FROM AUTHOR]