Search

The nonminimum-phase property of the dc–dc boost converter can create difficulties in designing a stable, robust, and fast control for the output voltage. In this article, these difficulties are reduced by modifying the state model of the boost converter in such a way that it behaves like a minimum-phase system. More specifically, the control input entering the state equation for the output voltage is treated as an unknown disturbance to make the relative degree of the system equal the system’s order. As a result, the modified model does not exhibit zero dynamics, so that it can be treated as a minimum-phase system for the control design. The modified model is, then, used to derive a dynamic compensator for the output voltage regulation. More explicitly, the dynamic compensator is designed based on combining linearizing feedback control with a disturbance observer. The latter is employed to compensate for model uncertainties and unknown load with a view to ensure asymptotic regulation under the composite controller. The asymptotic regulation is achieved due to the integral action property characterizing the disturbance observer. More interestingly, after simple algebraic manipulation, it turns out that the composite controller reduces to a dynamic state feedback control plus an antiwindup scheme to mitigate the effect of control saturation during transients. The performance of the proposed controller is verified by experimental tests. The experimental results demonstrate the ability of the proposed controller to achieve good transient and steady-state performances. [ABSTRACT FROM AUTHOR]

This paper presents the design and experimental validation of disturbance observer (DO)-based control for grid-tied photovoltaic (PV) inverters fed by a dc–dc boost converter considering unbalanced grid voltages. The control scheme uses multiples controllers that are developed based on employing DO technique along with a feedback-linearizing (FBL) control. The main controller is designed to regulate the active and reactive powers injected into the grid via controlling the grid-tied inverter. Under unbalanced grid voltages, the active and reactive power is composed of a dc component as well as an ac component that oscillates at twice the grid frequency. Therefore, the unknown perturbation, representing the mismatch between the nominal and actual system, can be treated as a sum of a constant offset and a sinusoidal disturbance. To ensure accurate control of the active/reactive power, a DO is designed to estimate the unknown perturbation, which is then canceled by a FBL control. By considering the control input limitation in the observer synthesis, an antiwindup compensator arises naturally in the control law, which attenuates the effect of the windup phenomenon during control saturation. Moreover, a simplified representation of the DO is proposed to facilitate real-time implementation. The proposed approach for the power control can be used in both balanced and unbalanced systems since it can reject constant and sinusoidal disturbances. Experimental tests were performed to investigate the ability of the proposed control scheme to achieve good transient and steady-state performances. [ABSTRACT FROM AUTHOR]

This paper presents a new method to design a current controller for grid-tied inverters under both balanced and unbalanced grid voltage conditions. The proposed controller consists of combining a feedback-output controller with a disturbance observer (DO). The control design is carried out in the  $\alpha \beta$ reference frame. Thus, the objective of the composite controller is to ensure that the output of the system tracks a sinusoidal reference signal with zero steady-state error. A feedback controller only cannot achieve a good tracking performance because of the presence of model uncertainties and unknown disturbances. To account for the natural mismatch between the actual system and the mathematical model, the system dynamics are first augmented with an additional state-variable, representing the disturbance, and the feedback controller is designed based on the assumption that the disturbance input is available for feedback. Then, an observer is constructed to estimate the disturbance, which is assumed to be a sine wave oscillating at the grid frequency. Another feature of the DO is its ability to compensate for the effect of the saturation blocks required to limit the control input during transients, leading to improved dynamic performance. Several experimental tests were conducted to verify the effectiveness of the proposed controller, and the results demonstrated its capability to achieve accurate fast stable responses. [ABSTRACT FROM AUTHOR]

In this paper, feedback linearization (FBL) technique together with disturbance observer (DO) approach is proposed to mitigate the effect of the resonant frequency of grid-tied LCL filter systems. The state-feedback control law is employed to achieve stabilization of the LCL filter system under a wide range of resonant frequency variation. The DO is designed to counteract the effect of model uncertainty and unknown disturbance aiming to achieve asymptotic stability under FBL control. Specifically, the observer is designed to estimate an additional input, representing uncertainty and unknown disturbance, from measurable variables. Then, the FBL control utilizes the disturbance estimate to compensate for its effect. An interesting feature of the composite controller is its ability to meet the transient response specifications even in the presence of model uncertainty and external disturbance. The composite controller was implemented for simulation and experimental evaluation, and performance testing. High performance with respect to disturbance rejection and parameter variation has been demonstrated. [ABSTRACT FROM AUTHOR]

The main advantage of the LCL filter in grid-tied converters is its ability to achieve a better harmonic mitigation in comparison with L filter. A proportional–integral (PI) regulator can be considered as a good candidate for controlling the LCL-filter system, as it is more convenient for real-time implementation. However, PI controller is not capable of stabilizing the grid-tied LCL -filter system when the resonance frequency of the LCL network is below a certain value that mainly depends on the sampling frequency. Such a problem can be overcome by adding an active damping (AD) to the PI controller. This paper presents the design, implementation, and performance testing of a stable PI current controller for a grid-tied inverter using LCL filter. The design process is based on combining feedback linearization (FBL) technique with a disturbance-observer-based control (DOBC). It turns out that the composite controller, consisting of FBL and DOBC, reduces to a PI current controller associated with a linear state-feedback control that plays the role of an AD. In addition, an antiwindup compensator arises naturally into the controller when considering the limits on the control input. An important feature of the proposed PI current controller is its ability to retain the nominal transient response achieved with state-feedback control even in the presence of model uncertainty and external disturbances. The proposed controller was verified through simulation and experimental tests. The results demonstrated the ability of the controller to provide good transient and steady-state performances. [ABSTRACT FROM AUTHOR]

A proportional–integral (PI) controller is the most frequently used control technique for adjustable speed-motor drives. The main advantage of a PI controller is its ability to ensure zero steady-state error under low-frequency disturbances and model uncertainties as long as the closed-loop system is stable. However, the transient performances, under a PI regulator, are highly dependent on the machine parameters, the external disturbances, and the input constraints. This brief proposes the design process of a novel PI speed controller that is capable of preserving almost the nominal transient performance under the parameter variation and external disturbances such as the load torque. The controller also suppresses the effect of input saturation that may occur because of the armature current limitation. Simulation and experimental tests are carried out to verify the validity of the proposed design process. The results revealed that the proposed PI controller is effective regarding nominal performance recovery and input constraints handling. [ABSTRACT FROM AUTHOR]

This paper presents the design, implementation, and performance testing of integral sliding mode control (ISMC) for a permanent magnet synchronous generator based wind turbine. More specifically, ISMC is combined with a feedback linearization (FBL) technique to recover its transient performance under model uncertainty and external disturbances. In this paper, we simplified the integral sliding surface structure to make it more convenient for real-time implementation. It turns out that the resulting integral sliding surface has a PI-like structure plus an additional part that has the role of preserving the nominal transient performance of the FBL. This key feature of the proposed PI-type sliding surface (PI-type SS) cannot be achieved under the conventional PI-type SS. Simulation and experimental tests are carried out to show the effectiveness of the proposed approach. The results revealed that the proposed PI-type SS is able to remove the steady-state error and retain the nominal transient performance of the FBL despite the presence of model uncertainty. [ABSTRACT FROM AUTHOR]

This paper presents a robust continuous-time model predictive direct power control for doubly fed induction generator (DFIG). The proposed approach uses Taylor series expansion to predict the stator current in the synchronous reference frame over a finite time horizon. The predicted stator current is directly used to compute the required rotor voltage in order to minimize the difference between the actual stator currents and their references over the predictive time. However, as the proposed strategy is sensitive to parameter variations and external disturbances, a disturbance observer is embedded into the control loop to remove the steady-state error of the stator current. It turns out that the steady-state and the transient performances can be identified by simple design parameters. In this paper, the reference of the stator current is directly calculated from the desired stator active and reactive powers without encompassing the parameters of the machine itself. Hence, no extra power control loop is required in the control structure to ensure smooth operation of the DFIG. The feasibility of the proposed strategy is verified by the experimental results of the grid-connected DFIG and satisfactory performances are obtained. [ABSTRACT FROM PUBLISHER]

PowerShift-Atlantic (PSA) is a pilot project lead by Canadian Maritime utilities that demonstrates direct load control strategies for up to 20 MW of commercial and residential loads for the purpose of balancing the intermittency of renewable generation and supporting demand-side management programs. On the residential side, domestic electric water heaters (DEWHs) form a significant end use class. The ability to accurately estimate and predict the state of individual end use devices allows aggregated control systems to better ensure end-use performance and comfort levels. This paper presents a methodology for estimating and predicting the state of individual DEWHs from models of their thermodynamics and water consumption that are derived under two scenarios: 1) when measurements of both power consumption and water temperature are available; and 2) when only measurements of power consumption are available. The proposed methodology was implemented as part of the PSA pilot project for the DEWH load class to simulate the behavior of the load in presence of the controller and evaluate the performance of the controller. Experimental results show that the model and water usage profile mimic the actual behavior of DEWHs, and can predict the future power consumption when the thermostatic control of a DEWH is interrupted as part of a load control strategy. [ABSTRACT FROM PUBLISHER]

This paper presents the design, implementation, and performance testing of a nonlinear proportional-integral (PI) predictive controller for a grid-tied inverter used in photovoltaic systems. A conventional cascade structure is adopted to design the proposed controller, where the outer loop is used to regulate the dc-link voltage, and the inner loop is designed as a current controller for adjusting the active and reactive powers injected into the grid. For each loop, the controller is derived based on combining a continuous-time nonlinear model predictive control and nonlinear disturbance observer techniques. It turns out that the composite controller reduces to a nonlinear PI controller with a predictive term that plays an important role in improving tracking performance. The salient feature of the proposed approach is its ability to approximately preserve the nominal tracking performance during the startup phase. Both simulation and experimental results are provided to demonstrate the effectiveness of the proposed approach in terms of nominal performance recovery, disturbance rejection, and current control. [ABSTRACT FROM AUTHOR]

A predictive direct torque controller (PDTC) for induction motors (IM) is proposed. It combines the direct torque control (DTC) and the predictive control (PC), and uses a predictive switching table to enhance the overall performance of the motor. A new type of PC is adopted for speed regulation with the use of a load torque observer, the torque being considered an unknown perturbation. A Kalman filter (KF) is used for reliable flux estimation. The validity of the proposed controller was experimentally confirmed on a rapid control prototyping station. The obtained results have proven superiority of the proposed control with respect to the speed trajectory tracking, torque and flux dynamic responses, and disturbance rejection. Also, a lower current distortion was observed with PDTC, in comparison with the regular DTC, due to increased mean inverter switching frequency. [ABSTRACT FROM PUBLISHER]

This paper presents a robust continuous nonlinear model predictive control (CNMPC) for a grid-connected photovoltaic (PV) inverter system. The objective of the proposed approach is to control the power exchange between the grid and a PV system, while achieving unity power factor operation. As the continuous nonlinear MPC cannot completely remove the steady-state error in the presence of disturbances, the nonlinear disturbance observer-based control is adopted to estimate the offset caused by parametric uncertainties and external perturbation. The stability of the closed-loop system under both nonlinear predictive control and disturbance observer is ensured by convergence of the output-tracking error to the origin. The proposed control strategy is verified using a complete laboratory-scale PV test-bed system consisting of a PV emulator, a boost converter, and a grid-tied inverter. High performance with respect to dc-link voltage tracking, grid current control, disturbance rejection, and unity power factor operation has been demonstrated. [ABSTRACT FROM PUBLISHER]

A nonlinear predictive control (NPC) scheme in a cascaded structure for a permanent magnet synchronous motor drive is proposed. Taylor series expansion is used to predict the system response over a finite horizon. As NPC cannot remove completely the steady-state error in the presence of mismatched parameters and external perturbation, a disturbance observer is used to estimate the offset caused by parametric uncertainties and the load torque variation. In addition, input constraints (restrictions on the magnitude) are considered in the synthesis of the disturbance observer, resulting in an equivalent cascaded proportional integral action with an antiwindup compensator. The validity of the proposed controller was tested via simulation and experiment. Excellent results were obtained with respect to the speed trajectory tracking, stability, and disturbance rejection. [ABSTRACT FROM PUBLISHER]

A robust nonlinear predictive controller for permanent-magnet synchronous motors is proposed. The nonlinear predictive control law is formulated by optimizing a novel cost function. A key feature of the proposed control is that it does not require the knowledge of the external perturbation and parameter uncertainties to enhance the robustness. A zero steady-state error is guaranteed by an integral action of the controller. The stability of the closed-loop system is ensured by convergence of the output-tracking error to the origin. The proposed control strategy is verified via simulation and experiment. High performance with respect to speed tracking and current control of the motor has been demonstrated. [ABSTRACT FROM PUBLISHER]