Search

Land surface temperature (LST) is a key parameter for many fields of study. Currently, LST retrieved from satellite thermal infrared (TIR) measurements is attainable with an accuracy of about 1 K for most natural flat surfaces. However, over urban areas, TIR measurements are influenced by 3-D structures and their radiation that could degrade the performance of existing LST retrieval algorithms. Therefore, quantitative models are needed to investigate such impact. Current 3-D radiative transfer models are generally based on time-consuming numerical integrations whose solutions are not analytical, and are therefore difficult to exploit in the methods of physical retrieval of LST in urban areas. This article proposes an analytical TIR radiative transfer model over urban (ATIMOU) areas that considers the impact of 3-D structures and their radiation. The magnitude of this impact on TIR measurements is investigated in detail, using ATIMOU, under various conditions. Simulations show that failure to acknowledge this impact can potentially introduce a 1.87-K bias to the ground brightness temperature for street canyon whose ratio “wall height/road width” is 2, wall and road temperature is 300 K, wall emissivity is 0.906, and road emissivity is 0.950. This bias reaches 4.60 K if road emissivity decreases to 0.921, and road temperature decreases to 260 K. ATIMOU is also compared to the discrete anisotropic radiative transfer (DART) model. Small mean absolute error of 0.10 K was found between the models regarding the simulated ground brightness temperatures, indicating that ATIMOU is in good agreement with DART. [ABSTRACT FROM AUTHOR]

Accurate retrieval of land surface temperature (LST) over urban areas is of great significance for urban thermal environment monitoring. In previous studies, most of the urban LST retrieval methods were developed based on the assumption of a flat surface without considering the influence of urban 3-D geometry structure, which has a significant impact on the retrieval accuracy of LST over urban areas. In this study, a radiative transfer equation (RTE)-based single-channel method was developed to retrieve LST with urban geometry effect correction from the Landsat 8 thermal infrared (TIR) data in band 10. The increase in adjacent radiance from the surrounding pixels and the decrease in atmospheric downwelling radiance caused by urban geometry structure were taken into account in this method. Because it is difficult to directly validate the retrieval accuracy of LST over urban areas using in situ LST measurements, the performance of the RTE-based LST retrieval method was evaluated via comparing brightness temperature (BT) at the top of the atmosphere (TOA) simulated by the discrete anisotropic radiative transfer (DART) model and the urban RTE over three subregions. There is a good agreement between BT at the TOA simulated by the DART model and the urban RTE, with a root-mean-squared error (RMSE) of less than 0.25 K. The variations in LST retrieved with urban geometry effect correction over different local climate zones (LCZs) were analyzed. In general, built-up LCZs have relatively higher LST than land cover LCZs. The differences between LST retrieved without/with urban geometry effect correction over different LCZs are greater than 0.2 K. The largest average LST difference over built-up LCZs is approximately 0.9 K, whereas that over land cover LCZs is approximately 0.65 K. LST retrieved without/with urban geometry effect correction was used to calculate urban heat island intensity (UHII) in terms of the LCZ-based method. The results indicate that UHII calculated from LST with urban geometry effect correction is lower than that calculated from LST without urban geometry effect correction, with an average difference of approximately 0.5 K. [ABSTRACT FROM AUTHOR]

Accurate estimation of land surface temperature (LST) is crucial for ecological environment monitoring and climate change studies in mountainous areas. The current LST retrieval algorithms were developed without accounting for the topographic effect, which can only be used to retrieve LST over relatively flat surfaces. Due to the impact of 3-D structure of mountainous surfaces, rugged terrain makes the processes of thermal radiation more complex. In this study, a radiative transfer equation (RTE)-based single-channel algorithm was proposed to retrieve LST with topographic effect correction from the Landsat 8 thermal infrared (TIR) data in mountainous areas. This algorithm accounts for the changes in the thermal radiation components in the TIR RTE caused by the topographic effect. According to the analysis of simulation data, sky-view factor (SVF), atmospheric water vapor content, surface emissivity of target pixel, and average LST of the surrounding terrain have significant influence on the magnitude of the topographic effect. The differences between the LST retrieved without/with topographic effect correction from the Landsat 8 TIR data are related to SVF. The topographic effect should be taken into account in the LST retrieval algorithm when SVF is smaller than 0.7. The largest LST difference of approximately 1 K occurs in the deep valley. The results indicate that LST without topographic effect correction could be overestimated to be as high as 1 K. Due to a lack of in situ LST measurements, the performance of the LST retrieval algorithm in mountainous areas was only evaluated by comparing the brightness temperature (BT) at the top of the atmosphere (TOA) simulated by the DART+MODTRAN model and the TIR RTE over mountainous surfaces at three subregions. There is a good consistency between BT at the TOA simulated by the DART+MODTRAN model and the TIR RTE over mountainous surfaces at the three subregions, with a root-mean-squared error (RMSE) of less than 0.23 K. [ABSTRACT FROM AUTHOR]