Search

We have assembled a tiled array (220 cm^2) of fine pixel (0.6 mm) imaging CZT detectors for a balloon borne wide-field hard X-ray telescope, ProtoEXIST2. ProtoEXIST2 is a prototype experiment for a next generation hard X-ray imager MIRAX-HXI on board Lattes, a spacecraft from the Agencia Espacial Brasilieira. MIRAX will survey the 5 to 200 keV sky of Galactic bulge, adjoining southern Galactic plane and the extragalactic sky with 6^\prime angular resolution. This survey will open a vast discovery space in timing studies of accretion neutron stars and black holes. The ProtoEXIST2 CZT detector plane consists of 64 of 5 mm thick 2 cm \times 2 cm CZT crystals tiled with a minimal gap. MIRAX will consist of 4 such detector planes, each of which will be imaged with its own coded-aperture mask. We present the packaging architecture and assembly procedure of the ProtoEXIST2 detector. On 2012, Oct 10, we conducted a successful high altitude balloon experiment of the ProtoEXIST1 and 2 telescopes, which demonstrates their technology readiness for space application. During the flight both telescopes performed as well as on the ground. We report the results of ground calibration and the initial results for the detector performance in the balloon flight. [ABSTRACT FROM PUBLISHER]

The spectral response of several crystals grown by the Traveling Heater Method (THM) were investigated. An energy resolution of 0.98% for a Pseudo Frisch-Grid of 4 times 4 times 9 mm3 and 2.1% FWHM for a coplanar-grid of size 11 times 11 times 5 mm3 were measured using 137Cs-662 keV. In addition a 4% FWHM at 122 keV has also been measured on 20 times 20 X 5 mm3 monolithic pixellated devices. The material shows great potential toward producing large-volume detectors with spectral performance that meets the requirement for high-resolution gamma-ray spectroscopy. [ABSTRACT FROM PUBLISHER]