Search

Pulsewidth-modulated (PWM) current-source converters (CSCs) have the features of simple configuration, reliable short-circuit protection, and sinusoidal ac output voltages. The conventional space-vector modulation (SVM) scheme usually generates high-magnitude low-order harmonics in CSCs with low switching frequency. In this article, two modified SVM schemes, namely MSVM1 and MSVM2, are proposed to improve the harmonic performance for PWM CSCs in the high-power applications with low switching frequencies. The MSVM1 scheme focuses on eliminating the average dwell-time error of current vectors within each sampling period, while the MSVM2 scheme is targeted to achieve the accurate dwell time of current vectors as that of the natural sampling-based SVM scheme. The theoretical analysis and the calculation equations of dwell time are derived for both MSVM1 and MSVM2. The experiments are given to verify the effectiveness of the two modified SVM schemes in improving the harmonic performance of high-power CSCs with low switching frequencies. [ABSTRACT FROM AUTHOR]

This article proposes an improved space vector modulation (SVM) for the current-source rectifier (CSR). Due to the overlap time during commutations of power switches, the pulsewidth-modulation (PWM) currents of CSR may suffer from a number of low-order (mainly fifth and seventh) harmonics, which seriously degrade the harmonic performance of currents and voltages on the grid side. Especially, the overlap-time effect becomes an important issue when the increased switching frequency is applied to CSR. To mitigate these low-order harmonics of the PWM converter currents resulted from the overlap-time effect, the relationship between the overlap time and the low-order harmonics in PWM currents and grid currents are analyzed at first. Then, the design process of the LC filter and the proposed SVM with optimal overlap-time distribution is presented in details. Finally, experimental results are conducted on a low power laboratory prototype to verify the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

In this article, the switching strategy and the remedial control scheme are studied for the cascaded current-source converters (CSCs) fed dual three-phase permanent-magnet synchronous motor (PMSM) variable-speed drives. An optimized space vector modulation (SVM) strategy is proposed to reduce the DC-link current ripple for the proposed drives system. In particular, this switching strategy can work effectively for motor drives under low speed with low back EMF, where there exists a large voltage difference between peak voltage values on the grid side and the motor side. Apart from that, a hybrid fault-tolerant control scheme is also designed for the open-phase fault in dual three-phase PMSM drives system, aiming at achieving small DC-link current ripple and torque ripple, low copper loss, and machine-friendly waveform quality. With the proposed optimized SVM and the hybrid fault-tolerant control strategy, the DC-link current ripple of the cascaded CSCs system can be effectively reduced and good operational performance can be obtained under both normal operation condition and open-phase fault condition. Experimental results are provided to verify the effectiveness of the proposed methods. [ABSTRACT FROM AUTHOR]

The grid inverters play an important role in renewable energy systems, transferring the dc power to the ac grid. Galvanic isolation is usually needed between the dc source and the grid due to safety reasons and grounding leakage current mitigation. In this article, a soft-switching isolated grid inverter is proposed based on the current-fed matrix-type configuration. The topology of this converter is composed of a current-fed H-bridge on the side of dc source and a direct matrix converter on the grid side, which are linked by a high-frequency transformer. The current-fed H-bridge on the primary-side can smooth the dc-source current and control the dc-source current directly. The avoidance of dc-link energy-storage element in the single-stage matrix converter can prolong the system's life. A space-vector-modulation-based soft-switching scheme is proposed for the matrix converter on the grid side and a model-based commutation method is adopted in the current-fed H-bridge on the dc side. With the proposed modulation methods, the soft switching can be realized for all devices in the converter. Finally, a laboratory prototype of the proposed converter has been built to verify the effectiveness of the proposed method experimentally. [ABSTRACT FROM AUTHOR]

The silicon carbide (SiC) devices have attracted more and more attention due to the capability of withstanding higher blocking voltage, higher switching frequency, and higher temperature. However, challenges for SiC devices applied in voltage-source-inverter fed motor drives such as electromagnetic interference (EMI) issues and limited over-current capability still limit the further application of SiC devices. In this article, a novel SiC devices based zero-voltage-switching (ZVS) current-source-inverter (CSI) is proposed for permanent-magnet synchronous motor (PMSM) drive. The key is to propose an auxiliary resonant circuit, which achieves ZVS conditions for all switches in power circuits and reduces the dv/dt of high speed SiC devices. The resonant capacitor in the auxiliary circuit can clamp overvoltage caused by possible open-circuit faults. To further reduce the EMI, the random switching frequency pulsewidth modulation is designed for the proposed CSI motor drive. The system configuration, working principle, circuit design, and control schemes are described in detail. Both simulations and experiments are presented to verify the effectiveness of the proposed ZVS-CSI fed PMSM drive system. [ABSTRACT FROM AUTHOR]

This article proposes an integrated high-sensitivity temperature sensor based on SiO2-asymmetric Mach–Zehnder interferometer (AMZI) and thermal-expansion-induced stress of aluminum-SiO2. Mechanical analysis of this structure is carried out. The result shows that the SiO2 chip is compressed, and the waveguide length is decreased, leading to the central wavelength shift of the sensor. The sensitivity of the sensor can be customized by different arm lengths of the AMZI. The chip is fabricated using a standard planar lightwave circuit (PLC), and the aluminum alloy plate is glued to the chip using $\alpha $ -cyanaloc acrylic resin adhesive. The sensitivities of two sensors with different arm lengths are tested. The test results show the sensitivity reaches 6.86 and 54.2 nm $\cdot \text{K}^{-1}$ , respectively, which coincides with the theoretical analysis. With low cost and customizable sensitivity, this new device is applicable in many fields. [ABSTRACT FROM AUTHOR]