Search

This paper presents a minimally invasive implantable pressure sensing transponder for continuous wireless monitoring of intraocular pressure (IOP). The transponder is designed to make the implantation surgery simple while still measuring the true IOP through direct hydraulic contact with the intraocular space. Furthermore, when IOP monitoring is complete, the design allows physicians to easily retrieve the transponder. The device consists of three main components: 1) a hypodermic needle (30 gauge) that penetrates the sclera through pars plana and establishes direct access to the vitreous space of the eye; 2) a micromachined capacitive pressure sensor connected to the needle back-end; and 3) a flexible polyimide coil connected to the capacitor forming a parallel LC circuit whose resonant frequency is a function of IOP. Most parts of the sensor sit externally on the sclera and only the needle penetrates inside the vitreous space. In vitro tests show a sensitivity of 15 kHz/mmHg with approximately 1-mmHg resolution. One month in vivo implants in rabbits confirm biocompatibility and functionality of the device. [ABSTRACT FROM PUBLISHER]

In this paper, we report on the first laser-micromachined batch-fabricated single-layer elastomeric actuator with a corrugated surface profile. The structural material of the cantilever actuator is a single [polydimethylsiloxane (PDMS)] layer, and electrodes are soft lithographically patterned conductive carbon grease. The asymmetric corrugated surface provides a bending moment in a single PDMS layer without the need for a second inactive layer. An actuator which is 5 mm long, 1 mm wide, and 80 \mu\m thick can generate up to 2-mm out-of-plane displacement with zero applied force and 15 \mu\N at zero deflection while consuming 20 \mu\W of static power when actuated with 500 V. \hfill[2011-0159] [ABSTRACT FROM AUTHOR]

We report on the development of a batch fabricated biodegradable truncated-cone-shaped plug filter to overcome the postoperative hypotony in nonvalved glaucoma drainage devices. Plug filters are composed of biodegradable polymers that disappear once wound healing and bleb formation has progressed past the stage where hypotony from overfiltration may cause complications in the human eye. The biodegradable nature of device eliminates the risks associated with permanent valves that may become blocked or influence the aqueous fluid flow rate in the long term. The plug-filter geometry simplifies its integration with commercial shunts. Aqueous humor outflow regulation is achieved by controlling the diameter of a laser-drilled through-hole. The batch compatible fabrication involves a modified SU-8 molding to achieve truncated-cone-shaped pillars, polydimethylsiloxane micromolding, and hot embossing of biodegradable polymers. The developed plug filter is 500 μm long with base and apex plane diameters of 500 and 300 μm, respectively, and incorporates a laser-drilled through-hole with 44-μm effective diameter in the center. [ABSTRACT FROM PUBLISHER]

In this paper, we present an ultrasonically powered implantable micro-oxygen generator (IMOG) that is capable of in situ tumor oxygenation through water electrolysis. Such active mode of oxygen generation is not affected by increased interstitial pressure or abnormal blood vessels that typically limit the systemic delivery of oxygen to hypoxic regions of solid tumors. Wireless ultrasonic powering (2.15 MHz) was employed to increase the penetration depth and eliminate the directional sensitivity associated with magnetic methods. In addition, ultrasonic powering allowed for further reduction in the total size of the implant by eliminating the need for a large area inductor. IMOG has an overall dimension of 1.2 mm × 1.3 mm × 8 mm, small enough to be implanted using a hypodermic needle or a trocar. In vitro and ex vivo experiments showed that IMOG is capable of generating more than 150 μA which, in turn, can create 0.525 μL/min of oxygen through electrolytic disassociation. In vivo experiments in a well-known hypoxic pancreatic tumor models (1 cm ^3 in size) also verified adequate in situ tumor oxygenation in less than 10 min. [ABSTRACT FROM PUBLISHER]

This paper reports a biaxial stretchable interconnect on an elastomeric substrate. To increase the stretchability of interconnects, a 2-D diamond-shaped geometry of gold on a polydimethylsiloxane substrate was adopted in which the potentially breakable points were covered with room temperature liquid alloy. Finite element model simulations were performed to identify the most vulnerable points subjected to stress concentration and optimize the design process. Simulations also indicated an optimum gold thickness and linewidth that result in a minimum stress when the substrate is stretched. Four different geometries were designed, fabricated, and characterized. These included: 1) 2-D diamond-shaped gold lines connected at circular junctions with an intersection angle of 90°; 2) 2-D diamond-shaped gold lines connected at circular junctions with intersection angles of 120° and 60°; 3) 2-D diamond-shaped gold lines separated at circular junctions with an intersection angle of 90° and 4) 2-D diamond-shaped gold lines separated at circular junctions with intersection angles of 120° and 60°. A maximum stretchability (ΔL/L) of ~60% was achieved for the design in which the lines and circles were separated and had intersection angles of 120° and 60°. A resistance variation of (ΔR/R) ~30% was measured for this configuration. [ABSTRACT FROM AUTHOR]

Although 3-D out-of-plane structures based on the thermal shrinkage of polyimide-filled V-grooves have already been demonstrated, for large bending angles, this method typically requires several V-grooves and high curing temperatures, which are real-estate consuming and can damage temperature-sensitive components. In this paper, we show that the addition of an inorganic layer (called the boosting layer) beneath the V-grooves can significantly enlarge the bending angle without requiring more V-grooves or higher curing temperatures. For example, a 2-μm-thick SiO2 boosting layer can raise the bending angle of a single V-groove joint by a factor of seven. In addition, the boosting layer removes the requirement for a V-groove and permits the use of straight-wall dry-etched grooves, hence allowing a sharper curvature in a smaller area. [ABSTRACT FROM AUTHOR]

In this letter, we report on a new solid-state structure for an integrating microdosimeter. The device consists of a silicon bar enclosed by a compound dielectric bilayer of silicon dioxide/ parylene acting as an ionization getter/electret. The dielectric bilayer is corona charged to establish a self-biasing structure that achieves high sensitivity without the need for a large applied voltage. For a 0.5 x 0.7 x 0.3 mm³ sensor with a dynamic range of 15 Gy, a sensitivity of 50 kΩ/Gy was measured. [ABSTRACT FROM AUTHOR]