Search

We demonstrate an RF photonic fractional Hilbert transformer based on an integrated Kerr micro-comb source featuring a record low free spectral range of 48.9 GHz, yielding 75 microcomb lines across the C-band. By programming and shaping the comb lines according to calculated tap weights, we demonstrate that the Hilbert transformer can achieve tunable bandwidths ranging from 1.2 to 15.3 GHz, switchable centre frequencies from baseband to 9.5 GHz, and arbitrary fractional orders. We experimentally characterize the RF amplitude and phase response of the tunable bandpass and lowpass Hilbert transformers with 90 and 45-degree phase shift. The experimental results show good agreement with theory, confirming the effectiveness of our approach as a powerful way to implement the standard as well as fractional Hilbert transformers with broad and switchable processing bandwidths and centre frequencies, together with high reconfigurability and greatly reduced size and complexity. [ABSTRACT FROM AUTHOR]

Optical frequency combs can potentially provide an efficient light source for multi-terabit-per-second optical superchannels. However, as the bandwidth of these multi-wavelength light sources is increased, it can result in low per-line power. Optical amplifiers can be used to overcome power limitations, but the accompanying spontaneous optical noise can degrade performance in optical systems. To overcome this, we demonstrate wideband noise reduction for comb lines using a high-Q microring resonator whose resonances align with the comb lines, providing tight optical filtering of multiple combs lines at the same time. By distilling an optical frequency comb in this way, we are able to reduce the required comb line OSNR when these lines are used in a coherent optical communications system. Through performance tests on a 19.45-GHz-spaced comb generating 71 lines, using 18 Gbaud, 64-QAM sub-channels at a spectral efficiency of 10.6 b/s/Hz, we find that noise-corrupted comb lines can reduce the optical signal-to-noise ratio required for the comb by ∼9 dB when used as optical carriers at the transmitter side, and by ∼12 dB when used as a local oscillator at the receiver side. This demonstration provides a method to enable low power optical frequency combs to be able to support high bandwidth and high-capacity communications. [ABSTRACT FROM AUTHOR]

We theoretically investigate and optimize the performance of four-wave mixing (FWM) in microring resonators (MRRs) integrated with two-dimensional (2D) layered graphene oxide (GO) films. Owing to the interaction between the MRRs and the highly nonlinear GO films as well as to the resonant enhancement effect, the FWM efficiency in GO-coated MRRs can be significantly improved. Based on previous experiments, we perform detailed analysis for the influence of the GO film parameters and MRR coupling strength on the FWM conversion efficiency (CE) of the hybrid MRRs. By optimizing the device parameters to balance the trade-off between the Kerr nonlinearity and loss, we achieve a high CE enhancement of ∼18.6 dB relative to the uncoated MRR, which is ∼8.3 dB higher than previous experimental results. The influence of photo-thermal changes in the GO films as well as variations in the MRR parameters such as the ring radius and waveguide dispersion on the FWM performance is also discussed. These results highlight the significantly improved FWM performance that can be achieved in MRRs incorporating GO films and provide a guide for optimizing their FWM performance. [ABSTRACT FROM AUTHOR]

The Kerr nonlinear optical performance of silicon nanowire waveguides integrated with 2D layered graphene oxide (GO) films is theoretically studied and optimized based on experimentally measured linear and nonlinear optical parameters of the GO films. The strong mode overlap between the silicon nanowires and highly nonlinear GO films yields a significantly enhanced Kerr nonlinearity for the hybrid waveguides. A detailed analysis for the influence of waveguide geometry and GO film thickness on the propagation loss, nonlinear parameter, and nonlinear figure of merit (FOM) is performed. The results show that the effective nonlinear parameter and nonlinear FOM can be increased by up to ∼52 and ∼79 times relative to bare silicon nanowires, respectively. Self-phase modulation (SPM)-induced spectral broadening of optical pulses is used as a benchmark to evaluate the nonlinear performance, examining the trade-off between enhancing Kerr nonlinearity and minimizing loss. By optimizing the device parameters to balance this, a high spectral broadening factor of 27.8 can be achieved – more than 6 times that achieved in previous experiments. Finally, the influence of pulse chirp, material anisotropy, and the interplay between saturable absorption and SPM is also discussed, together with the comparison between the spectral broadening after going through GO-coated and graphene-coated silicon waveguides. These results provide useful guidance for optimizing the Kerr nonlinear optical performance of silicon waveguides integrated with 2D layered GO films. [ABSTRACT FROM AUTHOR]

We propose and theoretically investigate integrated photonic filters based on coupled Sagnac loop reflectors formed by a self-coupled wire waveguide. By tailoring coherent mode interference in the device, three different filter functions are achieved, including Fano-like resonances, wavelength interleaving, and varied resonance mode splitting. For each function, the impact of device structural parameters is analyzed to facilitate optimized performance. Our results theoretically verify the proposed device as a compact multi-functional integrated photonic filter for flexible spectral shaping. [ABSTRACT FROM AUTHOR]

We theoretically investigate advanced multi-functional integrated photonic filters formed by three waveguide coupled Sagnac loop reflectors (3WC-SLRs). By tailoring the coherent mode interference, the spectral response of the 3WC-SLR resonators is engineered to achieve different filter functions with good performance parameters. These include optical analogues of Fano resonances that yield ultrahigh spectral extinction ratios (ERs) and slope rates, resonance mode splitting with high ERs and low free spectral ranges, and classical Butterworth, Bessel, Chebyshev, and elliptic filters. A detailed analysis of the impact of the structural parameters and fabrication tolerances is provided to facilitate device design and optimization. The requirements for practical applications are also considered. Our results theoretically verify the effectiveness of using 3WC-SLR resonators as multi-functional integrated photonic filters for flexible spectral engineering for a range of applications such as optical filtering, switching, and sensing. [ABSTRACT FROM AUTHOR]

We theoretically investigate and optimize four-wave mixing (FWM) in silicon nitride (SiN) waveguides integrated with 2D layered graphene oxide (GO) films. Based on extensive previous measurements of the material parameters of the GO films, we perform detailed analysis on the influence of device parameters including waveguide geometry, GO film thickness, length, and coating position, on the FWM conversion efficiency (CE) and conversion bandwidth (CB). The influence of dispersion and photo-thermal changes in the GO films is also discussed. Owing to the strong mode overlap between the SiN waveguides and the highly nonlinear GO films, FWM in the hybrid waveguides can be significantly enhanced. We obtain good agreement with previous experimental results and show that by optimizing the device parameters to balance the trade-off between Kerr nonlinearity and loss, the FWM CE can be improved by as much as ∼20.7 dB and the FWM CB can be increased by ∼4.4 folds, relative to the uncoated waveguides. These results highlight the significantly enhanced FWM performance that can be achieved in SiN waveguides by integrating 2D layered GO films. [ABSTRACT FROM AUTHOR]

We theoretically investigate integrated photonic resonators formed by two mutually coupled Sagnac loop reflectors (MC-SLRs). Mode interference in the MC-SLR resonators is tailored to achieve versatile filter shapes with high performance, which enable flexible spectral engineering for diverse applications. By adjusting the reflectivity of the Sagnac loop reflectors (SLRs) as well as the coupling strength between different SLRs, we achieve optical analogues of Fano resonance with ultrahigh spectral slope rates, wavelength interleaving/non-blocking switching functions with significantly enhanced filtering flatness, and compact bandpass filters with improved roll-off. In our designs the requirements for practical applications are considered, together with detailed analyses of the impact of structural parameters and fabrication tolerances. These results highlight the strong potential of MC-SLR resonators as advanced multi-functional integrated photonic filters for flexible spectral engineering in optical communications systems. [ABSTRACT FROM AUTHOR]

We demonstrate a photonic RF integrator based on an integrated soliton crystal micro-comb source. By multicasting and progressively delaying the input RF signal using a transversal structure, the input RF signal is integrated discretely. Up to 81 wavelengths are provided by the microcomb source, which enable a large time-bandwidth product of 81. Our approach also features a high degree of reconfigurability. By simply adjusting the value of dispersion (i.e., the length of dispersive fibre), the integration time window and resolution can be reconfigured to accommodate a diverse range of applications. We employed 13 km of standard single-mode fibre to achieve a large integration time window of ~6.8 ns, a time resolution as fast as ~84 ps, with a broad bandwidth of 11.9 GHz. In addition, we perform signal integration of a diverse range of input RF signals including Gaussian pulses with varying time widths, dual pulses with varying time intervals and a square waveform. The experimental results show good agreement with theory. These results verify our microcomb-based integrator as a competitive approach for RF signal integration with high performance and potentially lower cost and footprint. [ABSTRACT FROM AUTHOR]

We report a photonic-based radio frequency (RF) arbitrary waveform generator (AWG) using a soliton crystal micro-comb source with a free spectral range (FSR) of 48.9 GHz. The comb source provides over 80 wavelengths, or channels, that we use to successfully achieve arbitrary waveform shapes including square waveforms with a tunable duty ratio ranging from 10% to 90%, sawtooth waveforms with a tunable slope ratio of 0.2 to 1, and a symmetric concave quadratic chirp waveform with an instantaneous frequency of sub GHz. We achieve good agreement between theory and experiment, validating the effectiveness of this approach towards realizing high-performance, broad bandwidth, nearly user-defined RF waveform generation. [ABSTRACT FROM AUTHOR]

We report a photonic radio frequency (RF) fractional differentiator based on an integrated Kerr micro-comb source. The micro-comb source has a free spectral range (FSR) of 49 GHz, generating a large number of comb lines that serve as a high-performance multi-wavelength source for the differentiator. By programming and shaping the comb lines according to calculated tap weights, arbitrary fractional orders ranging from 0.15 to 0.90 are achieved over a broad RF operation bandwidth of 15.49 GHz. We experimentally characterize the frequency-domain RF amplitude and phase response as well as the temporal response with a Gaussian pulse input. The experimental results show good agreement with theory, confirming the effectiveness of our approach towards high-performance fractional differentiators featuring broad processing bandwidth, high reconfigurability, and potentially reduced sized and cost. [ABSTRACT FROM AUTHOR]

We report a broadband radio frequency (RF) channelizer with up to 92 channels using a coherent microcomb source. A soliton crystal microcomb, generated by a 49 GHz micro-ring resonator (MRR), is used as a multi-wavelength source. Due to its ultra-low comb spacing, up to 92 wavelengths are available in the C band, yielding a broad operation bandwidth. Another high-Q MRR is employed as a passive optical periodic filter to slice the RF spectrum with a high resolution of 121.4 MHz. We experimentally achieve an instantaneous RF operation bandwidth of 8.08 GHz and verify RF channelization up to 17.55 GHz via thermal tuning. Our approach is a significant step towards the monolithically integrated photonic RF receivers with reduced complexity, size, and unprecedented performance, which is important for wide RF applications ranging from broadband analog signal processing to digital-compatible signal detection. [ABSTRACT FROM AUTHOR]

We demonstrate photonic RF phase encoding based on an integrated micro-comb source. By assembling single-cycle Gaussian pulse replicas using a transversal filtering structure, phase encoded waveforms can be generated by programming the weights of the wavelength channels. This approach eliminates the need for RF signal generators for RF carrier generation or arbitrary waveform generators for phase encoded signal generation. A large number of wavelengths—up to 60—were provided by the microcomb source, yielding a high pulse compression ratio of 30. Reconfigurable phase encoding rates ranging from 2 to 6 Gb/s were achieved by adjusting the length of each phase code. This article demonstrates the significant potentials of this microcomb-based approach to achieve high-speed RF photonic phase encoding with low cost and footprint. [ABSTRACT FROM AUTHOR]

Absorption spectroscopy based on supercontinuum generation in the mid-infrared is a powerful technique to analyze the chemical composition of samples. Furthermore, phase-coherent supercontinuum sources can enable fast data acquisition with coherent, stable pulses that allow single-shot measurements. We report here a numerical study of the coherence of an octave-spanning mid-infrared supercontinuum source that was experimentally obtained in an air-clad SiGe/Si waveguide. We show that engineering two closely spaced zero-dispersion wavelengths that enclose an anomalous dispersion band centered around a fixed pump wavelength can produce supercontinuum pulses with high spectral density and full coherence at the extreme ends of the spectrum. This work is important for absorption spectroscopy, on-chip optical frequency metrology, and f-to-2f interferometry applications. [ABSTRACT FROM AUTHOR]

We report a broadband microwave frequency converter based on a coherent Kerr optical micro-comb generated by an integrated micro-ring resonator. The coherent micro-comb displays features that are consistent with soliton crystal dynamics with a free spectral range of 48.9 GHz. We use this to demonstrate a high-performance millimeter-wave local oscillator for microwave frequency conversion. We experimentally verify the microwave performance up to 40 GHz, achieving a ratio of −6.8 dB between output radio frequency power and intermediate frequency power and a spurious suppression ratio of >43.5 dB. The experimental results show good agreement with theory and verify the effectiveness of microwave frequency converters based on coherent optical micro-combs, with the ability to achieve reduced size, complexity, and potential cost. [ABSTRACT FROM AUTHOR]

We report a photonic microwave and radio frequency (RF) fractional Hilbert transformer based on an integrated Kerr micro-comb source. The micro-comb source has a free spectral range (FSR) of 50 GHz, generating a large number of comb lines that serve as a high-performance multi-wavelength source for the transformer. By programming and shaping the comb lines according to calculated tap weights, we achieve both arbitrary fractional orders and a broad operation bandwidth. We experimentally characterize the RF amplitude and phase response for different fractional orders and perform system demonstrations of real-time fractional Hilbert transforms. We achieve a phase ripple of <0.15 rad within the 3-dB pass-band, with bandwidths ranging from 5 to 9 octaves depending on the order. The experimental results show good agreement with theory, confirming the effectiveness of our approach as a new way to implement high-performance fractional Hilbert transformers with broad processing bandwidth, high reconfigurability, and greatly reduced size and complexity. [ABSTRACT FROM AUTHOR]